Fedora Hardware :: How To Get Video Driver Work Well
Jul 20, 2011
Recently I got an hp pavilion g4-1016tx laptop, I installed Fedora 15on it, I chose the "install with basic video driver" option, first it workedwell, but yesterday I could only log in with text mode.There are two videocards on my laptop: AMD Radeon HD 6470M Intel GMA HDI tried to install the ATI driver on my laptop, and I still failed to makeit work properly.My error messages are as follows:
# aticonfig --initial
aticonfig: No supported adapters detected
# fglrxinfo
[code]....
View 1 Replies
ADVERTISEMENT
Feb 28, 2010
Host: CentOS 5.4 x32
Guest: FC12 x32
Virtual machine: Virtual Box (VBox) 3.1.4
The 640 x 480 video display on my FC12 guest is driving me nuts! The VBox Guest Additions are installed. How do I get FC12 to recognize the VBox video driver?
Extra information:
Auto resize works great on my Windows guests. On FC12, I just get a lot of extra white space.
FC12's installer does not detect a video card. You have to use the stand display option (second one down) to get FC12 to go into a full graphical installer. If you use the regular install, hoping to do a graphical install, FC 12 only install the bare basics. No video support. You get what looks like a rescue cd. No Gnone, no X etc.
I do believe that FC12 has no idea that the VBox's fake video adapter even exists.
View 1 Replies
View Related
Apr 20, 2010
I cant install or do to work the compiz...
my driver is Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
what can i do to have all effects and working fine?
View 12 Replies
View Related
Jun 28, 2009
I am a Ubuntu and LINUX newbie. Install goes easy but I can not get 3D accelerated graphics to work. So I am stuck with poor and slow graphics. I tried and tried with the ATI card and went back to make onboard the primary. Neither seems to allow for visual effects upgrade nor 3d graphics in games.
Here is lspci:
View 2 Replies
View Related
Jul 11, 2009
I have installed knoppix 6.0.1 persistent to a usb flash drive. I am currently testing it on my laptop and have successfully installed the graphics driver for nVidia Geforce 7150m driver 180.51
All looks great until i restart and it doesnt work again. when i go to reinstall it, it says its already there, but when i open the nvidia-settings, it doesnt look the same as before. If i reinstall it, it works again, until i restart of course.In case this is important, here is how i installed the driver in root terminal:
sudo apt-get install gcc make
init 3
cd /home/knoppix/Desktop
sh NVIDIA-Linux-x86-180.51-pkg1.run
(A series of questions come up asking to compile a kernel, etc.)
(install runs)
init 5
I am guessing that the new kernel needed for the driver that is installed is not being booted up on when knoppix restarts. I am just unsure as how I can make this kernel accessible at start up or how to start up this kernel again without reinstalling the driver
View 1 Replies
View Related
Nov 14, 2010
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
View 5 Replies
View Related
Oct 19, 2010
I am using Fedora 13 (64-bit). My video card is ATI Radeon HD 4650. I am having problems with the standard Linux driver and somebody has suggested that I should install an ATI-specific video driver. I am told that I should start the PC in failsafe mode, and then tell it to install the "restricted" ATI driver.
View 2 Replies
View Related
Jun 14, 2011
For some reason my laptop runs hotter when running Fedora, than it does with windows. I am wondering if the problem is with video. Currently using default video driver.
View 6 Replies
View Related
Aug 14, 2009
When you put in the Fedora disk, it has an option "Install system with basic video driver". What does that mean? If I am not going to download a video driver, is that the better choice?
View 9 Replies
View Related
Apr 11, 2010
how do I tell if F12 has installed the correct driver for my Dell GX260?
View 10 Replies
View Related
Nov 14, 2010
could anybody tell me how to install fedora14 on X201, especially the video driver. Post added at 12:48 PM GMT Previous post was at 12:40 PM GMT it is Fedora14, i wrote the wrong title.
View 8 Replies
View Related
Aug 29, 2011
Code:
direct rendering: Yes
server glx vendor string: ATI
server glx version string: 1.4
server glx extensions:
client glx vendor string: ATI
client glx version string: 1.4
[Code]...
write me a 100% working step-by-step guide to remove all Ati VGA driver and restore the original "mesa" and other things? It's good too if i can just switch back. I have ugly glitches, slowdowns etc. since i installed the driver with fedora "easy life". I know there are many threads about this but i didn't find a clear working explanation.
View 2 Replies
View Related
Mar 28, 2011
However, I have had this issue with Windows computers as well, I just don't know how to beat around this problem and fix it with the new OS.
For starters, I have a Sony Vaio laptop (VGN-NS295J) that's running a ATI Mobility 3430 Video card on F14 64bit.
From the beginning, my device was not recognized with a good driver, so I started jumping through hoops reading forums of how to properly install this driver and get rid of the on board video. After I was successful (so I thought) I rebooted my system, and now after Fedora finishes loading the operating system, the screen goes gray and I can start typing in whatever I want.
I can still log in by Ctrl+Alt+F2 or whatever it is, but I'm stuck to text, and don't know my way around well enough yet.
I believe the issue is that it's trying to treat my laptop as two moniters, or defaulted my monitor incorrectly perhaps? At least this is what always happened to me in the past with Windows.
I just fresh installed F14 today, so I don't have anything of importance on the HD.
*UPDATE* Okay, so i've figured out hitting escape lists two versions of Linux there off the boot. The top one repeats the message I've just given, and the second one will go to the Fedora screen right after the boot (where it fills the emblem diagonally), then the screen flashes like it's starting to run my video card, and the screen goes black.
View 2 Replies
View Related
Sep 26, 2009
I am running fedora 11 64bit version and just installed cedega to run a few games. I have Nvidia Geforce 9800M GTS 1GB graphics card. and installed my graphics drivers via: yum install kmod nvidia. i downloaded and installed the cedega application from the Cedega download
[Code]...
View 6 Replies
View Related
Oct 22, 2009
I have a new Fedora 11 install with all updates working on my: Dell XPS M1330 laptop with nVidia GeForce 8400M GS
I wanted to install compiz fusion on Gnome so I followed these step by step instructions from:
Fedora refused to boot, locking up during the process.
Here is what happens...
After updates I had 3 options at boot up:
A) If I choose the TOP one (newest) it will boot up to a black screen and nothing else, I get a white block which moves with mouse. I cant get a shell and any key I hit just echoes back...ctr-alt-del will result in normal shutdown process displaying.
If I watch the services start (F1) I see all -OK- except: nvidia.ko: Driver already enabled
The boot continues with all OK until it gets to:
STARTING atd:
at which time the screen flashes for about 7 seconds and locks up.
B) If I choose MIDDLE boot option and watch the boot process I see most services start OK except:
-[OK]
Checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.30.8-64.fc11.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until found [WARNING]
Driver already disabled
-[OK]
Then the services continue on with [OK] until a few seconds later the screen halts with a mess of colors and symbols on screen and system stops booting. Any key pressed simply echoes back with no other result. Again ctrl-alt-del refreshes screen and shutdown of services proceeds normally.
View 3 Replies
View Related
Mar 21, 2010
I'm a new user of fedora12 and I'm a beginer in Linux, I'll apreciate if someone tell me how to install a driver for my video card (nvidia 9400GT) because when I try desktop effect fedora disply an error "require hardware 3D support" and that tell's me I don't have the appropriate driver.
View 7 Replies
View Related
Feb 25, 2011
how do you install an nVidia video driver?
View 1 Replies
View Related
Jul 23, 2011
The nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies
View Related
Apr 3, 2010
Something went wrong with my video driver to the point that the X will not load any more. I am using my live CD. Is there a way to back up all my prefs and software installs, so I do not have to reset it all up after re-installing.
View 3 Replies
View Related
Jul 16, 2010
I am setting up Fedora 13 on a Dell optiplex 755 with the following video hardware installed:
/sbin/lspci -nn | grep 'VGA|NV'
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [FireMV 2200 PCI] [1002:5965] (rev 01)
How can I find/install the right driver for this video card?
View 12 Replies
View Related
Feb 19, 2011
Looking for an option to get Fedora working again, I followed Leighs guide to install the kernel nvidia driver. On Reboot however I am stuck a the Fedora splash.Is there a way when booting to disable splash, or enter in safe mode?I have an nvidia geforce 9 card and I used the non-PAE install.
View 6 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Jul 8, 2010
I install security updates - did so and ended up with a copy of fedora that goes into a loop. I suspect the prob is the driver to my video adapter. To run, I need to interrupt grub with an escape. It then shows me two choices the bad one 2.6.32.12-115.fc12.i686 and the old good one 2.6.31.5.- 127.fc12.i686 It defaults to the bad one, I change it to the good one and tell it ot proceed. this is inconvenient
I see that in /boot/grub/grub.conf the 2 systems are described I beleive that if I merely edit that file, taking out the refernece to the bad one, I will be ok That will leave the bad one on the disk but at least I wont have to go thru the ritual of interrupting grub. If I want to delete the bad one - after I've taken care of the grub.conf file, what do I do?
View 10 Replies
View Related
Jul 20, 2010
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
View 9 Replies
View Related
Feb 13, 2011
I installed Debian recently, and everything seems to be working fine, except some video games are unusually slow compared to what they would normally be. Tremulous, for example, worked reasonably fine on this computer with Windows XP, but now (Debian) for some reason it's laggy even on the title screen.
Something wrong with my video drivers?
All of the information I know:
The computer is a Dell Dimension 3000
RAM: 256mb? Gnome System Monitor says 247.1mb, SWAP: about 730mb
Processor: Intel Celeron 2.40GHz
HD: 25gb out of a 40gb HD free, and an external 1tb HD with about 920gb free
Debian Release 6.0 (squeeze)
Kernel Linux 2.6.32-5-686
GNOME 2.30.2 (I've tried LXDE also, no noticeable change)
Only linux on the machine.
glxinfo told me this:
Code:
64 GLX Visuals
128 GLXFBConfigs:
lspci told me this:
Code:
View 9 Replies
View Related
Jun 18, 2010
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
View 3 Replies
View Related
Aug 5, 2010
Under Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies
View Related
Aug 6, 2011
I am running gnome 3 on ubuntu 11.04, a clean installation from the gNatty version, 32 bit. The machine is a Lenovo t420, with 6GB RAM and a integrated video card.
Everything is running smoothly but not for games. I tried urban terror, Tremulous, Nexuiz, all of the lags from the very beginning as if I was using a machine 5 years ago to run today's video games (ie, takes 10 seconds for a mouse move a show, audio lags, .etc). From my experience it should come from video card driver not installed, but the update manager shows all device works fine (indeed, the screen resolution is 1600X900).
View 9 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Aug 27, 2010
I'm trying to install an ati video card driver, but can't seem to get past this (see screenie)
When I click okay, I expected a prompt to put in my password, but everything just closes.
View 2 Replies
View Related