I had FC 14 installed on an SSD, and 4 500Gig drives in a software RAID-5 configuration. However, just recently, my FC14 failed horribly. Fortunately my admin had recently backed up the /etc directory. When FC14 failed, he reinstalled FC14 on the SSD. Is there any way for me to re-establish the RAID-5 drives, since they were not affected?
View 1 RepliesI installed Fedora from CD, but soon I have a DVD with more soft on it. how I can make so, that Fedora install soft from DVD, but not from the Internet?
View 1 Replies View RelatedHow to install micro soft fonts in F12, mainly arial in openoffice?
View 1 Replies View RelatedI have the Ubuntu 9.10 installed and another partition where I want to have Fedora.
But I would like to install it without messing up with the Grub 2 bootloader that I already have there.
Is it possible to install Fedora and then add it to Grub 2? If so, how can I do that?
I am running Fedora 12 and I am trying to install the DHCP. well I use the yum -y install dhcp command and this is what I get "Transaction Check Error: file /user/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686
file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686"
I am a newbie at this and I tried the yum remove, yum update and the yum update says dhcp packages available but not installed.
I am trying to upgrade from Fedora 12 to Fedora 13 using "Preupgrade" but it fails in the last part and tells me that the system cannot find the previous system (fedora 12). I have tried to do the upgrade several times and always the error is the same.
View 3 Replies View Relatedi want to remote control my laptop with my phone via terminal
im trying to use this guide to connect my android phone to my fedora laptop via ssh and vnc, but the connectbot ssh connection is timed out
[URL]
however, this guide assumes a running ssh and vnc server, which isn't trivial to me, i think i have established these, but i don't know how to test it
also i am not shure if my router and firewall configuration is correct, i disabled wan blocking but didn't enable remote config management on my rooter, is that correct?
I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).
As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message
Quote:
Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0
If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.
If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.
Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.
Does anybody have an idea how to enforce that the vpn connection is actually used?
11.4 Boot Freeze That is there is a BUG: soft lockup - CPU#0 stuck message and the boot hangs.The modprobe/migration codes are not identical with the linked thread. I'm stuck with CPU#0 at [modprobe:138] and #1 stuck at [migration1:8]. Generally after 61 or 63s.
This is a zypper dup from latest 11.3.The machine boots with acpi=off, luckily. But I'd like to have it all working.The forum says I can't post attachments; hwinfo output seems a bit copious to quote inline. But I'd be happy to provide any additional info obviously.
I have no drive failures but just need to recreate a raid5 set as the next free MD disk number. Originally I built a temp OS of debian on a single drive and had 4x2TB drives in a raid5 software array (MD0) this worked fine and allowed me to move all data to it, and remove our old fileserver. I have now pulled out the 4 x 2TB Raid 5 drives and created a new OS on two new 80GB drives, partioned as follows,
MD0 is now 250mb Raid1 as /boot
MD1 is 4GB Raid1 Swap
MD2 is 76GB Raid1 as /
If I turn off and push back in the 4x2TB drives I cannot see a MD3. I presume I would need to create a MD3 from these 4 drives but I dont want to mess things up as its live data. So im here asking for help, or a bit of hand holding to get it done right.
PS - Its a Debian Lenny 5.0.3 Raid1 fresh install replacing a Debian Lenny 5.0.3 on a single disk.
Acer Aspire S7-391 laptop, 64 bit install
Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
Code: Select all[ 7002.597774] BUG: soft lockup - CPU#1 stuck for 22s! [khubd:93]
[ 7002.597777] Modules linked in: tun hid_generic hidp rfcomm bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) cfg80211 cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace 8812au(O) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev joydev media x86_pkg_temp_thermal intel_powerclamp intel_rapl acer_wmi sparse_keymap coretemp iTCO_wdt
[Code] ....
lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
[Code] ....
I am using F13 on my netbook for a week so far. Its worth mention, I am completely new new to Linux. Want to say many thanks to Fedora developers for such a great OS, it makes me really happy.
Now, on the subject, I have a very small monitor 1024x576, this is causing difficulties with GIMP, and more, I found that GIMP is too much 'overfeatured' :-( . Searching on this forum , I found posts about 'Kolour' for KDE desktop. Maybe you can recommend a similar simple image editor for Gnome desktop? Crop/resize and pencil tool where i can pick up color and draw pixels will suffice most of the time.
Also I am using Firefox a lot and thought whether it possible to get a small feature , I will try to describe it: when the window is maximized I want to hide the window's header and menu, which would give me extra 40-50 pixels height to the contents of the window.
Yeah, I know I can hide navigation bar, but how then I will type the page location?
I know you can fail and then remove a drive from a RAID5 array. This leaves the array in a degraded state.
How can you remove a drive and convert the array to just a regular, clean array?
I tried to upgrade to Leonidas from Cambridge, but didn't have enough space on the partition /, so I soft linked /var/cache/yum (or whatever) to a larger partition, but now the upgrade does not find the subdirectory called preupdate (it's there in the linked dir, checked). Is there any more sofisticated way around than changing parition sizes and copying and stuff?
View 4 Replies View RelatedRunning OpenSuse 11.4 and have setup 2 x Raid5 configs - raid created, disks format, everything working fine. I've just rebooted and the raid5 fails to initialize.
Getting these errors:
Code:
May 29 16:58:30 suse kernel: [ 1788.170692] md: md0 stopped.
May 29 16:58:30 suse kernel: [ 1788.197864] md: invalid superblock checksum on sdb1
May 29 16:58:30 suse kernel: [ 1788.197876] md: sdb1 does not have a valid v0.90 superblock, not importing!
[Code]....
I can see some soft links in /etc directory which are pointing to /etc/rc.d Directory contents.
Code:
lrwxrwxrwx. 1 root root 7 Jan 31 08:19 rc -> rc.d/rc
lrwxrwxrwx. 1 root root 10 Jan 31 08:19 rc0.d -> rc.d/rc0.d
lrwxrwxrwx. 1 root root 10 Jan 31 08:19 rc1.d -> rc.d/rc1.d
code....
Any body please tell me what is the purpose of these soft links in /etc directory ? I am using RHEL 5.4 ...
I have just recently installed opensuse 11.2 (on a seperate hdd) on my file server. I have a highpoint rocketraid card in the system with 4 x 1.5tb HDDs. I'd like to get my RAID5 showing up without loosing any data? Is this possible??I have been following this post over HERE
/proc/partitions
major minor #blocks name
8 0 1465138584 sda
8 16 1465138584 sdb
8 32 1465138584 sdc
8 48 1465138584 sdd
[Code]...
I have a raid 5 with 5 disks, I had a disk failure which made my raid go down, after some struggle I got the raid5 up again and the faulty disk was replaced and rebuilt itself. After the disk rebuilt itself I tried doing a pvscan but could not find my /dev/md0. I followed some steps on the net to recreate the pv using the same uuid then restored the vg(storage) using a backup file. This all went fine.I can now see the PV, VG(storage) and LV's but when I try to mount it, I get a error "wrong fs type" I know that the lv's are reiserfs filesystems, so I did a reiserfsck on /dev/storage/software, this gives me the following error:reiserfs_open: the reiserfs superblock cannot be foundNow next step would be to rebuild then superblock, but I'm afraid that I might have configured something wrong on my raid or LVM and by overwriting the superblock I might not be able to go back and fix it once I've figured out what I didn't configure correctly.
View 5 Replies View RelatedI've got a RAID5 array that doesn't want to automount after rebooting. I'm pretty familiar with linux, RAID, and mdadm, and up until now, I've had the RAID5 array working just fine. However, whenever I reboot, the array drops off and won't remount until I manually assemble and then mount the thing. I find this odd because I had everything automounting just fine back in 10.3, and even in 11.0 (I think - not sure on that). Currently, things are working, but I'd really like to not not have to type
Code:
mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1
followed by
Code:
mount /dev/md0 /mnt/data every time I reboot. Even including this in some sort of start-up script seems kludgey... Surely there must be a more elegant way of automatically bringing up a RAID5 array after booting? I'm not sure what information you'll need, so I'm going to go ahead and include as much as I can anticipate...
So having already used the commands:
[Code]....
I have a 2-quad core Intel Xeon system that I have set to RAID-5. I then attempted to install Ubuntu Server. When the message came up about enabling SATA RAID, I said NO because I have hardware RAID installed on the box. So I completed the install, and when I go to view the RAID configuration using the Intel Matrix Storage Manager during boot, it says:Volume0, Level: RAID5(Parity), Status: DegradedWhen I install enabling SATA RAID, I get a message asking me to "configure iSCSI volumes". When I click on that, I get another message: Loginto iSCSI targets. When I click on that I get another message: "Enter an IP address to scan for iSCSI targets". I have no idea what to put as thye iSCSI target portal address!
View 5 Replies View RelatedI've tried to type this message twice in detail, but the computer won't submit it. What are the proper steps to take when a SCSI drive fails in a RAID five array running CentOS 5.4?
Yes, I read the manual. On a Dell 6650 system the drive can't be rebuilt because it is not recognized as the correct size. Linux rescue doesn't work... won't find the linux partitions that are still there according to fdisk -l
I want to install (or compile myself) a previous kernel release (2.6.31.13). Where can I get it?
I mean a Debian Kernel with all your patches etc.
I'm using Debian Unstable. I just noticed that it was the quickest kernel (well, maybe for me only and my hardware).
I used to have 2.6.34-12-default kernel. Recently I downloaded and installed 2.6.35.1-1.1 DEBUG kernel. Because I cannot either use pre-compiled packages or compile new package from source, I want to go back to 2.6.34-12-DEFAULT kernel.
View 7 Replies View RelatedI'm looking for suse 9.3, was looking around the download section and couldn't find it.
View 7 Replies View RelatedMy latest update (this am) included a chromium update. Chromium now will not do much, gets hung up on most searches, can't access gmail and a few other misc strange things so I thought I would try to go back a version, since it is in .archives. I deleted the current version 5.0.393, and trying installing the older version, and it said it wouldn't cause a newer update is available. I tried reinstalling the newer version again, with no luck.
View 9 Replies View RelatedI have ubuntu 9.10 on my machine. Haven't used it for ages and no longer have password to install updates through update manager. I want to install 11.04 which i have downloaded but can't install it because i didn't install all the previous updates and don't have that password. My question is how do i uninstall 9.10 completely so that i can start from scratch with 11.04.
View 1 Replies View RelatedI was running Ubuntu 9.10 and had the MySQL datadir moved to a different directory, /store/mysql. Due to a filesystem problem on the upgrade to Ubuntu 10.04, I was forced to reinstall. My /store/mysql was copied back over, changes to /etc/mysql/my.cnf and /etc/apparmor.d/usr.sbin.mysqld, but MySQL hangs when I go to start it and nothing is showing up in any of the logs. How do I get MySQL to recognize the datadir from the previous install?
View 1 Replies View RelatedI've got version 1.2 of package dtc. I installed it using apt-get install. But I want version 1.1 of it installed instead. How do I get that?
View 5 Replies View RelatedNote: This how-to assumes you are using LVM on top of the RAID5
Example scenario:
VG0 <-> md0 = RAID5(3x500GB) = sda1, sdb1, sdc1
Volume Group VG0 is made up of a single Physical Volume (md0), which is made up of 3x500GB hard drives in
[code]....
i`ve been learning a lot from your Decent site long ago, a long with my Linux Self-Study , i`m a MS System-Admin with 6 months Linux experience and growing ..
## My Situation ## :-
-CentOS 5.6(Final) x86_64 2.6.18-238.9.1.el5xen, Running as Backup-Server.
-4 HDD, 1x500GB , 3x1TB
-2 Raid Arrays (/dev/md0)-RAID1, (/dev/md1)-RAID5
-/boot on (/dev/md0)-RAID1 using ( /dev/sda1, /dev/sdb1)
[Code].....