I have the Ubuntu 9.10 installed and another partition where I want to have Fedora.
But I would like to install it without messing up with the Grub 2 bootloader that I already have there.
Is it possible to install Fedora and then add it to Grub 2? If so, how can I do that?
I've been using Ubuntu on my servers, deskto PC and laptop. But this time I decided to give a try for Fedora 13. Earlier my tests failed because of nVidia driver installation for every kernel update was so pain for me. Fedora's Live CD is quite stripped. It has good tools installed but it's missing OpenOffice.org. That should be mostly for demostration to Windows users.Installation with Live CD is straight forward even I haven't tried with Windows partitions (shrink or so). Ubuntu can be installed inside Windows drive (into loop file) without shrinking partitions. I don't know if Fedora can do the same.
But issues what I have got even before getting in... Disk partition tools are very great. But when I tried to install Fedora into LVM without using separate /boot partition - that failed. I am using Ubuntu's GRUB2 and it can boot from LVM root directly. And I thought Fedora-13 can do the same. I have been installing Red Hat Enterprise Linuxes many many times. And there is an option to skip bootloader installation. Why it is missing on Fedora? I just want Fedora into LVM without anything else. Ubuntu's GRUB2 can boot from Fedora's /boot -directory even it's on LVM. If I get Fedora installed.
So error what I get trying to install Fedora...Harddrive sda has just one big LVM partition, nothing else. Ubuntu GRUB2 is on MBR.I have just one 10Gb LV for Fedora, existing /home and swap. Plus Ubuntu's own root partition what I don't need with Fedora.partitioning program is completed as I like but then I get error message: Bootable partitions cannot be on a logical volume. I have tried to install using Live CD, DVD with graphics and text modes. None of them gives me option to skip installing bootloader. Another option I had on my mind is that I could try to use USB memory stick to have /boot. But I'm not sure if it works and installer will overwrite my existing GRUB2 on sda. If it works then I could move /boot -stuff into LVM and tell Ubuntu's GRUB2 to boot from Fedora's root LVM.
I'm currently in the process of installing F13 from a LiveCD into a dualboot configuration with Windows 7 and I used 80 gigs of unpartitioned space for the install.The step after it creates the boot, swap etc partitions is to install the bootloader.Should I install it to the MBR or to the first sector of the boot partition? What are the pros and cons of both?
View 5 Replies View RelatedI am trying to install Fedora 14 with the LILO bootloader. The live installation disc does not let you select a bootloader during installation. how to install with GRUB2, that will work as well
View 3 Replies View RelatedI've installed Fedora to dual-boot with Ubuntu. I'm using /dev/sda1 for Ubuntu, and /dev/sda3 for Fedora. Unfortunately, I unchecked the "Install boot loader" checkbox, so I still have the Ubuntu boot loader but no way to boot Fedora. While still logged into the Fedora Live CD, how can I install the Fedora boot loader to /dev/sda3 and set it up to chainload from Ubuntu's GRUB menu? (I'm thinking it would be 'grub-install /dev/sda3' as root, and then just edit /dev/sda1:/boot/grub/menu.lst, but I'd like confirmation.)
View 2 Replies View RelatedI have a major problem installing opensuse 11.3 on my computer( hp pavilion dv6).I downloaded openSUSE-11.3-GNOME-LiveCD-x86_64 from software.opensuse.org: Download openSUSE 11.3 and made a live usb.I'm a newbie at using linux infact i never used another operating system beside windows.Now i have installed windows 7 (on c disk 100gb).My first problem when i am trying to install opensuse is that he dosn't automatic choose to make my partitions so i have to do it manualy.I was searching how to make it the best way so i desited to make 4 partitons one for ' /boot' one for ' / 'one for '/home' and a swap partition/In windows7 i made 4 new partitons
3:10 gb for /boot
4:10 gb for/
5:70 gb for /user
6:10 gb for /swap
My first question is :Is this right to make 4 paritions in windows (opensuse can't format or resize my partitions it just can edit it ) so it's my only way to make partitions( If this is wrong how can i make partitions then)
My second question is how to change the bootloader configurtation because everytime when ii try to install opensuse it stops at about 96% and it says to reconfigure the bootloader options.
If i skip this i get the folowing message
=== System Checking ===
Checking for /usr/bin/chroot binary... Passed
Checking for chroot directory /mnt... Passed
Checking for chroot directory content (bin
boot
Checking for binary /mnt/bin/ls... Passed
Trying to chroot... Failed
This is worth reporting a bug at url.
Over the last two months I've been trying out Ubuntu 10.04 32bit using Wubi under my current Windows 7 32bit OS, and I'm at the point where I want to reformat and partition my HDD making Ubuntu my main OS (with a very small partition for Windows 7 on the side for certain things).I was just wondering if it is somehow possible to export all my current settings and preferences for my current installation of Ubuntu so that once I've reinstalled it, I can import them and everything will be the same as it is now (I hope that made sense...).I'm not too fussed about reinstalling apps and things, just all my current settings and preferences.Oh and also, (this might not be the place to ask, but I know you'll probably be able to answer this as well) is there anything I can use to do the same export/import process with my Windows 7
View 3 Replies View RelatedI updated to new ubuntu with the selection to leave the previous version untouched... At boot I try to log into previous version and all I get is 11.04... I dont like the new Ubuntu and I want to uninstall but how?
View 3 Replies View RelatedI am running Fedora 12 and I am trying to install the DHCP. well I use the yum -y install dhcp command and this is what I get "Transaction Check Error: file /user/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686
file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686"
I am a newbie at this and I tried the yum remove, yum update and the yum update says dhcp packages available but not installed.
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies View RelatedI am installing version 10.10. Does it matter where I install the bootloader? There are selections for the entire device and each partition. I have Windows 7 on /dev/sda1 and Ubuntu on /dev/sda3. The last time I tried this I couldn't go back to Windows 7 even after using the grub-update commands.
View 9 Replies View RelatedI have seen multiple others with this problem, I now have it too. I had Ubuntu 10.10 installed on my entire disk, then I installed Fedora 15 with it. The resizing-the-disk went smoothly, everything is great, but now when I turn on my machine, I get no grub, no boot loader, nothing. I just get thrown right into Fedora. I saw on a few other posts that if you manage to get into Ubuntu, you can open a terminal and type something along the lines of sudo grub update, and that would do the trick. The only issue is that I can't even get into ubuntu. I also was told that if you boot from a livecd you can edit the boot config, or view it, or something. I'm pretty new to all this "bootloader grub" jazz, and am hopelessly confused. How do I make it so that upon startup, I am able to choose between Ubuntu and Fedora?
View 9 Replies View RelatedI had FC 14 installed on an SSD, and 4 500Gig drives in a software RAID-5 configuration. However, just recently, my FC14 failed horribly. Fortunately my admin had recently backed up the /etc directory. When FC14 failed, he reinstalled FC14 on the SSD. Is there any way for me to re-establish the RAID-5 drives, since they were not affected?
View 1 Replies View RelatedI just upgraded two 11.2 installations. One I easily managed from the dvd the other I had to install anew as the cd didn't offer the possibility of upgrading. While I appreciated the many improvements in desktop stability I found I am non very satisfied of the installer.
It became minimal and just does what IT wants and not what I want anymore. I miss the possibility of choosing desktops, programmes and settings during installation. Most of all I miss the possibility of choosing the bootloader and its location. I have a multi boot multi disk machine and I prefer to modify entries by hand so i never install the loader but add the new entry in the grub but this was not possible and it made just a mess erasing completely all other entries....
Booting has always been a great problem for one of my machines and I'm not going to upgrade it if thisi is the result. Is there a way of going back to the old options (no loader?) Why are the new installer always "easier" but less flexible for a user who's not geek but not even a newbie? Why does it have always to be more "Windows like"
I dual boot Ubuntu, and Windows 7 on my WD Scorpio Black 1TB hard drive (if the HD matters). I burned a CD to install Ubuntu 10.10 (32bit Desktop). The installation was going smoothly until I got an error that it cannot install the Bootloader to /dev/sda, I tried all the partitions under that (/dev/sda1, 2, 3). And NONE of them worked. When it rebooted it went to "grub recovery" where I could no enter anything.
I had to reinstall Ubuntu 10.04 to get my computer back and it's now dual-booting Windows 7 and Ubuntu 10.04 again. This is a major issue and it's completely preventing me from installing Ubuntu 10.10 on my machine.
I have been using Ubuntu almost since it began, and I've never had an issue like this before. I do a clean install of every major new release. I want Ubuntu 10.10
I have a Dell 17R Dual Booted with Win7 and Ubuntu 10.04.I had problems getting online via Wired and/or Wireless.Ubuntu 10.10 is up, running, and updated. Broadcom Corp 4727rev 01 Wireless not detected [URL].The solution involved the installing of Ubuntu 10.10. However, now after a complete shut down I cannot boot into Win7 anymore. The boot loader recycles to the selection screen and I can go back to Ubuntu 10.10 but not Win7.
View 6 Replies View RelatedI just installed the 10.10 version of Ubuntu and while doing so I also deleted the whole partition on the harddrive. While I where installing the OS. I got this message:
Sorry. An error occurred and it was not possible to install the bootloader at the specified location.
(Here I get to choose either if I want to choose a different place to put the bootloader on. Or if I want to continue without a bootloader or if I would want to cancel the installation.) I am currently writing from the live CD. And If I try to boot without the CD. The computer tells me that there is no bootable device. I have tried to reinstall Grub. I have also tried to reinstall the whole Ubuntu 10.10. I have also tried to install Ubuntu 10.04. Both with the original CD.
I'm trying to install 10.10 x32 server, on a machine with the HW Raid-5. And install fails on Bootloader setup :/, so I continue with installation, and everything finishes fine.When machine boots, it obviously (since grub failed to install) says insert bootable media, and press any key. So I boot from the CD, goto rescue mode, installer environment:
>>mount /dev/mapper/server-root /mnt
>>grub-installer --root_directory=/mnt /dev/mapper/server-root
Wrong number of args: mapdevfs <path>
I tried to install OS multiple times, from full automatic HDD partition setup, to manual, and it always fails to install grub . I can mount, read/write /dev/mapper/server-root partition, and the contents of the partition looks like a valid OS.
Is there a relatively easy way to restore the "previous" version of an RPM in FC10? The last set of updates killed my GUI and I'd very much like to get back to whatever I had before I got updated to:
xorg-x11-server-common-1.5.3-13.fc10.i386
xorg-x11-drv-evdev-2,1.3-1.fc10.i386
xorg-x11-server-Xorg-1.5.3-13.fc10.i386
I first installed 9.10 from 9.10 Live CD to my Thinkpad X200 selecting not to install its bootloader thinking I could use NTLDR. That did not work at all. Tried bootpart, starting 9.10 from LiveCD to reinstall grup... I gave up and in WinXP, deleted the 9.10 partition and its SWAP partition.
I reinstall 9.10 again into the now freed space.This time I selected to install the bootloader but to /dev/sda5.After completing the installation,I rebooted to WinXP and used bootpart to create the necessart ubuntu.bin and instructions in boot.ini.That did not work. I went into 9.10 live CD again and use dd command to extract the fir 512bytes from /dev/sda5 and place it in a USB drive as ubuntu.bin.Rebooted into WinXP and put this new ubuntu.bin into C:. All I get when booting into Ubuntu is a blank screen...
I have a new computer with two 500 gb hard drives which I use in raid 0. I tried to install Ubuntu 9.10 off the live cd but it was unable to partition the raid and kept failing. I was then told top use the alternate cd. I use that and my raid is detected, partitioned, and the system is installed. However now I cannot install a boot loader as I get continuous errors. Right now I am left with no ideas with what to do. I have Ubuntu installed to my hard drives just no way of accessing it.
View 2 Replies View RelatedI'm an Ubuntu Lucid user who is trying Fedora 13. Successfully installed, but did something wrong at the bootloader stage. For identifier I typed "Ubuntu." the dropdown menu below was already reading sda1 as the partition that Ubuntu is on, so I kept it. Now Ubuntu is on the boot menu, but will not load... error message about an unrecognized system. How can I manually add it now? Sorry, should have done a search. I found an answer in editing the menu.conf file.
View 5 Replies View RelatedI am trying to upgrade from Fedora 12 to Fedora 13 using "Preupgrade" but it fails in the last part and tells me that the system cannot find the previous system (fedora 12). I have tried to do the upgrade several times and always the error is the same.
View 3 Replies View RelatedWhen I install Fedora 12, I tried to use manual partition like before. But installation failed somewhere. So I have to accept Fedora 12's default partition. Once I experienced slow login problem. I have to reinstall. But the reinstallation would delete the previous installation. Is there a good way to keep personal files intact on reinstallation?
View 1 Replies View RelatedGoing from Fedora 12 to 13. Got to the point where I have to reboot to install, system reboots to 12. This is a triple boot system with Open Suse and Mint, and the grub2 bootloader from Mint is the bootloader for the whole shebang. In the "how to use preupgrade" instructions there's a line that says "dentify the drive and partition of your Fedora /boot folder." How? If that sounds odd, consider that in my set up "computer" shows 4 partitions (and with just three operating systems..?). I can mount them, but have a problem telling which sytem is Fedora, Suse or Mint. And getting the FEDORA bootloader to find the PREUPGRADE kernel ... Momma said there'd be days like this.
cat /etc/fstab just returned /dev/sda1 on /boot. I installed Fedora first, before Suse or Mint, so being on the first drive or partition sounds right, but the multiple drives throws me, and "just guessing" doesn't seem like the way to go.
I have an issue after the installation of debian 8.2 on an usb flash drive:
I had debian 8.2 and windows 8.1 running on a single SSD. Everything was fine. I wanted to install a second debian on a 32gb USB flash drive as a live system. After the installation I am not able to boot my debian (SSD) without the flash drive plugged in. I only get a grub rescue prompt. Booting windows still works. It is also possible to boot both debian systems if the USB drive is plugged in.
So it seems to me, that the debian bootloader was accidently installed to the USB flash drive and the original bootloader on the SSD does not work properly anymore. I used a netinst image from a second USB flash drive to install debian to the first USB flash drive.
Update fdisk output:
/dev/sda1 2048 2050047 2048000 1000M Windows recovery environment
/dev/sda2 2050048 2582527 532480 260M EFI System
/dev/sda3 2582528 4630527 2048000 1000M Lenovo boot partition
/dev/sda4 4630528 4892671 262144 128M Microsoft reserved
/dev/sda5 4892672 223840255 218947584 104,4G Microsoft basic data
[Code] ....
I had Fedora on my laptop (as well as Windows Vista 32-bit) working fine but I wanted to add Ubuntu for some things, and I did, however something unexpected happened: When I go to boot the the computer, the GRUB 2 bootloader (from Ubuntu) showed ubuntu, and windows, but not fedora, so I can't get into fedora. From a knoppix disk, I determined that all my fedora stuff is there, and (to the best of my ability to determine) intact, but I can't access it. What can I do from Ubuntu or the GRUB 2 bootloader itself to simply add fedora to that list?
View 3 Replies View RelatedI recently installed Fedora on a triple boot system with Winows XP and Ubuntu JJ. how to add Ubuntu's grub to the bootloader. Here is the output of Fdisk -l.
[root@localhost rabbit]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
I am having to get off UBUNTU cause flash runs HORRIBLY.. I can log on to facebook and open apps and FF 3.0.18 almost comes to a hault same thing for ..... the video lags anyways, someone on another Linux forum im on said try FEDORA. well what if I have windows XP and lets say FEDORA isnt for me.. how do I reset the bootloader back to XP'S will it do like UBUNTU and say ok XP'S bootloader is on SDA2 so this is where I need to go so when I run the XP recovery cd, I can FIXBOOT FIXMBR then its restored back to XP's then just go in and delete the partition
I ask cause, I got really screwed by suse... It put my boot loader on ANOTHER partition instead of finding XP'S and basically was locked out and had to reinstall windows cause I had no clue how to link it back up to the partition that XP was on, because I had no clue it was put somewhere else. I was so mad.
Just got done installing F14 64 and all went well however when I rebooted the machine it boots straight into windows, where is my GRUB boot loader? Only one drive in this machine (sda) and I remember going through the GRUB settings during the install. How to get a bootloader working now because in my linux experience (since RH5) it has always just installed the bootloader and worked. Apparently ext4 is bunk for me and when using LVM settings. I am up and running and grub is working.
View 2 Replies View Related
