Fedora X86/64bit :: Upgrade - Kernel Isn't Booting
Sep 30, 2010I upgraded my F13 kernel from 2.6.33 to 2.6.34. But, the newer kernel isn't booting. It starts the booting process and then goes idle. how shall I troubleshoot?
View 2 Replies
ADVERTISEMENT
Fedora X86/64bit :: Booting Updated 2.6.39.1 X86_64 Kernel
Jul 19, 2011In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
Fedora X86/64bit :: Way To Upgrade Kernel To 2.6.38
Apr 27, 2011Is there an easy way to upgrade kernel to 2.6.38?
Or do i have to compile a custom kernel?
Fedora X86/64bit :: Upgrade 12 To Xserver 1.8 And Kernel 2.6.34?
Apr 2, 2010I am running fedora 12, x64. How can I upgrade fed12 as such? (apart from compiling the kernel myself)
View 3 Replies View RelatedFedora X86/64bit :: F12 Kernel Upgrade Failed - Eclipsed?
Dec 8, 2009The -162 kernel upgrade just released failed to boot in my x86-64 system. Additionally, both previous kernels failed in (probably) the same way. The progress icon proceeded all the way to its 'f' image, and then hung. I touched escape key, and found several disturbing messages among a dozen or so lines --
mdadm: No arrays found in config file or automatically. A dynamic linking error occurred: /lib64/multipath/libcheckdirectio.so: no such file or directory awk: cmd. line:1: fatal: cannot open file `/etc/inittab` for reading (Invalid Argument). Init: rcS post-stop process (807) terminated with status 2s. I got into rescue mode with my install disk, then looked for libcheckdirectio.so in /mnt/sysimage/lib64 but it was not there. Also, locate -d /mnt/sysimage/mlocate/mlocate.db/libcheckdirectio.so found nothing.
Ran chroot and executed the fakd diagnostic (which I had not seen before) and rebooted. Same problem - although now the screen is telling me SELinux is requiring a targeted policy relabel. My dual-boot-to-vista system has been erratic (requiring fsck several times, and confounding the Vista partition to require file checks), primarily since a large install of Eclipse and multiple plug-ins AFAICR.
Fedora X86/64bit :: No Sound From Pulseaudio , ALSA After 2.6.40 Kernel Upgrade / Get That?
Aug 2, 2011I just got the upgrade for the Linux Kernel version 2.6.40-4 on my Fedora 15 x86-64 box today, and the installation completed with no problems. However when I rebooted after doing the upgrade, I noticed that I had no sound. I use an ATI Radeon HD 4350 video card, and the opensource ATI driver, and use the HDMI audio from it for sound, since my monitor has a sound output jack on it. I've booted into the previous kernel (2.6.38.8-35), and sound works fine. I've tried with the new kernel in both KDE (my default desktop environment) and XFCE to get sound, and it does not work in either one. I've tried installing the VLC Phonon Backend instead of the GStreamer Backend, reinstalling Pulseaudio, reinstalling Alsa, modprobing the necessary modules needed for the card, checking all configurations with the available Pulseaudio tools (paprefs, pavumeter, pavucontrol), checked the volumes using alsamixer, and reinstalling the ALSA Pulseaudio plugin. After trying all of these, I can still get no sound out of any application, and I also noticed that Flash video plays at 2-3 times it's normal speed after the upgrade. Again, these problems do not occur on my previous kernel. Did I maybe overlook something, or can anyone else think of something I could try?
View 14 Replies View RelatedFedora X86/64bit :: F13 Freezes When Booting / What To Do?
Sep 3, 2010After a few updates i restarted fedora. But now it won't boot anymore.
The screen freezes every time at this screen -> http://i3.photobucket.com/albums/y69...s/DSC04094.jpg
Fedora X86/64bit :: F11 Webserver Has Stopped Booting?
Jun 5, 2010Last night I couldn't access my webserver, so I ran downstairs and turned on the monitor, only to find a "GRUB" prompt on the screen. I don't really know much about grub, but it didn't seem to accept any input anyway, so I rebooted, and after the server went through all its hardware checks, the "GRUB" prompt reappeared, still unresponsive to any input.
Next I booted with the F11 DVD and selected "Rescue Mode" from the menu. That looked hopeful. I was able to mount my filesystem, but I have no idea what I'm looking for or how to fix it. The manual hasn't been too helpful, and I haven't found any "how to guides" that address this kind of thing.
How does a solid reliable system like this just stop working? How can I get it back on its feet, and is there anything I can do to prevent whatever happened from happening again? Am I doing anything wrong?
This server has been running nonstop and trouble-free for about four years now. I upgraded from F10 to F11 without incident. I'm running Apache httpd, Tomcat (through httpd via ajp13), and sshd (only accessible from the local network). I update everything with yum on a weekly basis. The server is on a private network with port 80 NATted through the cable modem and a wireless router. The wireless network is secured with WPA2 Personal.
I was just about to upgrade to F13 before this happened, and I'm now wondering if I should do a clean install and start over, or if installing F13 as an upgrade will fix whatever is wrong with the system. I've always felt you had to get everything in working order before you even think of upgrading, but I don't know if that applies to Linux. Will I just end up with a F13 system that won't boot?
Fedora X86/64bit :: Get Back To Proper Booting/desktop?
Apr 25, 2010I've installed some updates for Fedora 12 x64 and now I don't get the desktop, but a flashing cursor and no boot. After forcing a reboot it says something like "interrupting smolt update" and then shuts down. How do I get back to proper booting/desktop?
View 1 Replies View RelatedFedora X86/64bit :: Best Way To Upgrade From F6 To F11?
Jun 21, 2009I'm running now fedora 6 in my laptop and i will like to upgrade to F11; i understand that the upgrade can be done only from F10 to F11;
Can anyone tell me the best way for me to upgrade from F6 to F11.
Fedora X86/64bit :: Compiz Freeze After Kernel 2.6.27.19-170.2.35
Mar 8, 2009The only error message I am able to retrieve is in the GDM 0.log as follows:
AUDIT: Sat Mar 7 17:58:27 2009: 5034 X: client 9 rejected from local host ( uid=500 gid=500 pid=5066 )
Fedora X86/64bit :: Kernel Image Not Found
Jun 12, 2009I downloaded 64-bit version of Fedora 11 and burned the iso on my dvd. When I rebooted the machine it booted up from the dvd but it showed an error message that kernel "image not found". And it stops there itself. Can someone show me some way except downloading the iso again?
View 1 Replies View RelatedFedora :: How To Determine Kernel 32bit Or 64bit
Sep 17, 2010Google answers attempted:
# grep lm /proc/cpuinfo
# uname -m
# file /sbin/init
# file /usr/bin/file
I don't think none of the above gives deterministic answer. Since I have 32-bit & 64-bit different system all of above spit out the same info.
Fedora X86/64bit :: Get Sound Through The System With Kernel 2.6.40.1
Aug 7, 2011I've managed to get some sound through the system with kernel 2.6.40.1. I use multiple sound cards, I have problems with keeping the same order. I added in etc/modprobe.conf The list of sound devices, putting my D66 card as device 3, Rebooted and cat /proc/asound/cards showed all fore devices in the correct order. I got audio through one of the apps , and started to try and get another ,wsjt, to function.
[Code]....
Fedora :: Moving From 32bit To 64bit Kernel
Aug 12, 2011I have been running F14 as a 32-bit system (original m/b was 32-bit). Now the system is on a 64-bit dual-core processor board and I'd like to change from the 32-bit kernel to 64-bit. I downloaded a 64-bit kernel (kernel-2.6.35.6-45.fc14.86_64.rpm) and attempted to install it. It won't install and Package Installer returns a message of the sort that says this file "has incompatible architecture.
Valid architectures are ['athlon', 'i686', 'i586', 'i486'....]". My processor is an Athlon 64 x2. Is it possible to do what I want to do (I only want the kernel at the moment)? Is there some Fedora file I need to modify to allow the system to install the 64-bit kernel for this m/b? Do I need another file (or files) installed before I install the kernel?
Fedora X86/64bit :: How To Upgrade 3.5Beta4?
Jun 19, 2009Firefox 3.5 Beta4 is completely unstable, once I open 2 or 3 tabs my entire laptop freezes. There is no control +alt combination that will take it off of it. I need to press the power button 10 seconds to reboot. I have done all updates. removed all add-ons from firefox. and still not working.I have never seen a linux machine completely lock up, even caps lock wont work
Any ideas? I saw that Firefox 3.5RC1 is out. HOw do I upgrade the 3.5Beta4?OR how do I downgrade to 3.0.11. I did download those versions, but I ran them out of their folders and not really upgraded the installed firefox.
Fedora X86/64bit :: GPU Lockup After Upgrade From 11 To 12
Nov 19, 2009I just upgraded from F11 to F12 and get this error:
[drm] nouveau 0000:01:00.0 GPU lockup - switching to software fbcon
With Ctl-F2 I can switch to console and login, so the system is running.
"ps -ef | grep Xsession" shows constant changing pid for Xsession, so I guess Xsession is continuously being restarted for some reason.
Fedora :: Upgrade From F12 32bit To F13 64bit?
Sep 27, 2010Is it possible to upgrade from F12 32bit to F13 64bit? The hardware would support 64bit.
View 1 Replies View RelatedFedora Installation :: F10 - Adding 64bit Kernel And Applications
Feb 7, 2009I have a new work laptop (Dell M6400) that I currently have F10 i386 on. I would like to take advantage to the 64bit processor, but don't know if I need to completely re-install my F10, or if I just have to add the proper 64 bit kernel and applications.
View 4 Replies View RelatedFedora X86/64bit :: Multi-boot - What Is Kernel Number
Mar 29, 2009Ive loaded 64studio (hda6) grub in MBR, and fed10 grub on its partition (hda8), but from Studio it seems i cant Mount fed10 files to look at the Kernel path from MBR. (studio did not auto pick it up, like it did for Mandriva on hda7)
Does anyone know what it is ? something like kernel /boot/vmlinuz.....and Initrd(hd0,7)/boot.initrd.img .....then i can Edit menu.Lst in MBR grub.
Fedora X86/64bit :: Vmware Cannot Find Kernel Header
Jul 28, 2009I am running a vmware on a 64 bit fedora 9. I have already installed kernel header, but the vmware could not find the kernel header, and ask to input the kernel header path. I added /usr/include to the vmware, it complained not a right kernel header.
View 1 Replies View RelatedFedora X86/64bit :: Upgrading To Kernel-2.6.31.9-174.fc12.x86_64?
Dec 29, 2009I have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
Fedora X86/64bit :: Boot From A Vanilla Kernel Without Initrd?
Oct 17, 2010I've downloaded 2.6.36-rc8 vanilla kernel, then I copied .config file from my current working kernel 2.6.32.21-168.fc12.x86_64, then I've configured, compiled and installed kernel like this:
Code:
make gconfig
make -j4 all (or make all)
make modules_all
make install
The last command edits my grub.conf file and writes this:
[Code]....
I checked my .config and ACPI, and File Systems are built into kernel and not loaded as modules... And, I have LVM but my /boot partition isn't in it, so I don't HAVE to use initrd, right? How can I boot from a vanilla kernel without initrd ?
Fedora X86/64bit :: Unable To Boot After Kernel Update
Feb 11, 2011I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
Fedora X86/64bit :: No Sound At All In After Update Kernel-2.6.35.11-83.fc14
Feb 12, 2011there is no sound in Fedora14 after kernel update (kernel-2.6.35.11-83.fc14). when use kernel-2.6.35.10-74.fc14 , I can listen to music.
View 14 Replies View RelatedFedora X86/64bit :: 14 Completely Unusable; Probably Because Kernel Update
May 24, 2011My main systems runs Fedora 14 x64 with the latest updates (I can't check anymore, but I believe it has the .13.91 x64 kernel). Since this afternoon it became unsuable. First, Opera Browser crashed and the crash report app of the browser showed up. Clicking one of the options there resulted to X crash, if I understood what really went on. No input, mouse or kb, I couldn't go to tty etc. I had to do a hard reset. Next boot proceeded normally up to the point that GNOME desktop is fully loaded. ABRT began reporting numerous kernel oops.
Rebooted again (noticed that init.d fails, so hard reset again) and tried past two kernel versions, same results.
Yum crashes and so does everything. I tried to revert all recent updates with yum history, but yum crashed.
Last update was May 22, and it updated kmod-nvidia.
Quote:
uname -a
Linux innovator 2.6.35.13-91.fc14.x86_64 #1 SMP Tue May 3 13:23:06 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
initial crash
Package: kernel
[code]...
before the reboot Opera 11.11 had crashed and it's own bug report tool came up. Clicking the "do not report this error now" option probably crashed X, because the screen went black and no input was possible (no mouse or keybord, so I couldn't go to tty either. Had to do a hard reset) Bug Reports:Kernel oops report was uploaded
One of the numerous crashes
Package: kernel
Latest Crash:Τρι 24 Μάι 2011 09:19:56 μμ
[code]...
Fedora X86/64bit :: Cannot Update Kernel (Fedora 10 X86_64)
May 31, 2009Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]
Fedora X86/64bit :: Is It Safe To Use Preupgrade For F12 Upgrade?
Nov 17, 2009Just started to use Fedora and version 11 a couple of months ago. Is it safe to use preupgrade to do an upgrade to version 12 or is it better to do a fresh install?
View 2 Replies View RelatedFedora :: Kernel 2.6.33.2 Not Booting With 11
Apr 26, 2010I had fedora-11 installed and the kernel version was 2.6.29 I downloaded new kernel version 2.6.33.2 and did following,
make mrproper
make
make modules_install
make install
when I rebooted and selected 2.6.33.2 from grub entry, fedora logo came and spalshed, after that monitor started blinking and now its not going anywhere, i can see blank screen and nothing else. If I do ctrl+alt+del it shuts down the system normally.
I tried interactive mode also system did fine untill this point "registering binary handler for windows application" after that the same problem came, monitor started blinking and screen is blank., Any pointer regarding this will be helpful , what exactly went wrong? I can provide more info if u need it.
Fedora X86/64bit :: Kernel Update Fails To Install - 2.6.27.15-170.2.24.fc10
Feb 19, 2009I just tried to update to kernel 2.6.27.15-170.2.24.fc10 (x86_64) at the suggestion of the gnome update widget, and the process hung. A bunch of other things were updating at the same time, many of which were related to audacity or wine.
I'm not sure just what was being updated, because the option to review which updates are available does not work - when I click on it, nothing happens, but when I take the other choice (install all updates), I take pot luck. It would be nice to be able to choose which programs to update, and to be able to upgrade the kernel independently, but I don't seem to be able to do that at the moment.