now the thing is im bit of a dumb girl when it comes to computers. Apparently I need to install some Java software just to get my pictures on my facebook. I have tried following the instructions at Java but i am a total newbie lol
I was hoping some of the boys here could help me , I did try look at some other threads but I just get even more confused. Please dont be mad if this is a dumb question coz some of us are not as smart as you guys here. I am also looking forward to making new friends here if you on facebook xx xx lol
I am trying to use Skype beta on my acer aspire one with ubuntu 10.10. The video runs brilliantly and i can also here my wife from the other end but she cannot hear me. Apparently something is fishy with my mic input. I tried alsamixer and everything is in unmute. My alsa version is 1.0.23. The only think she hears is a loud hissing noise which is normally my bat voice but she doesnt need to know that. I can record my voice in the sound recorder but nothing comes out in Skype!
When rebooting a fresh Fedora 15 install or even after the end stage of the actual installation itself, my Acer Aspire One (AOA110) with 16GB SSD and 3309 BIOS just stalls.
I have tried installing to the SSD and also to an external USB connected HDD. In all cases the actual reboot process stalls when shutting down and I have to power cycle the netbook to reboot it. The boot process works perfectly and F15 starts up fine.
If I use a "poweroff" command instead of a "reboot" command, the netbook powers off correctly. It's just the reboot that doesn't work. All updates have been applied to F15.
I should mention that it works correctly under F14...
after messing with fstab + mtab, my aspire one netbook completely failed , so i rebooted using a live USB. My desktop and default settings were restored. When i tried to install firefox 3 (default browser is firefox 2 ), yum hangs and refuses to do anything. I tried deleting and reinstalling yum, and it was mostly successful until i tried the "make" command which according to bash does not exist. how to install make without using yum?
Package gnome-bluetooth-2.28.6-2.fc12.i686 already installed and latest version so that's done.I'm certain I have a bluetooth adapter inside my laptop, however when I go to System > Preferences > Bluetooth, the started program says there are no bleutooth devices.There is a hardware button with the bluetooth symbol.
[root@jonas Jonas]# lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)[code].........
I have an Acer Aspire One running Fedora 10.The Aspire One has a built in multi-format memory card reader compatible with SDHC, XD, Memory Stick Pro and MMC cards, however the card reader is only detected during bootup if a card is inserted otherwise the device isn't detected, the relevant drivers aren't loaded and the card reader doesn't work.
In other words if Fedora is booted without a card in the reader and I then want to use the card reader I have to insert a card and reboot in order to use it, after which cards can be inserted & removed and are detected and automounted with no problems.When the card reader is working lsmod shows the following modules are loaded.
If the laptop is booted without a card in the reader none this shows up. I've also tried manually loading the mmc_core, mmc_block, sdhci, memstick & jmb38x_ms modules to see if this kicks the reader into life but it doesn't. Is there a way of forcing the detection of this device during bootup?
Have a dedicated Fedora 10 laptop so that I can learn everything I need to know. I am using an Acer Aspire 3000 with a fresh copy of Fedora 10 and KDE
The Aspire 3000 has a built in broadcom wireless card, with windows XP you activate the wireless using an LED button on the front of the laptop, but with Fedora I can't seem to do this.
I have found a couple of threads to fix this error on Ubuntu but nothing about fedora. I don't want to change OS as I have just about got this system running like clockwork. I have left the wireless until last as the normal LAN works fine.
I have an Acer Aspire 1410 laptop which was running Win7. The laptop lacks a DVD drive and came pre-installed with a recovery partition as well.I've been searching for ways to dual-boot Fedora on it. I bought a Samsung USB DVD drive, but I burned two copies of Fedora 12 and neither would boot, nor would my Knoppix Live CD. I even updated the bios. Then I tried liveusb-creator from my desktop Fedora 10 system, but I would still run into strange errors that prevented booting into the installer.
Finally I downloaded UNetbootin and created a USB stick to boot Fedora 12. Neither Fedora 12 nor Ubuntu would recognize my network adaptor for some reason. Undaunted, I then used UNetbootin to create a Fedora 11 image which got me into the boot installer for the first time. I then used my Fedora 12 image from my portable DVD drive to install. The install seemed to go well.
That is, until I rebooted. Grub came up as expected. Fedora 12 runs into a very early Kernel panic (not syncing: DMAR hardware is malfunctioning) within moments. I tried rebooting into Windows, but it apparently doesn't care much for Grub. It sends me into the Recovery software and asks me to reset my hard drive. I've tried that a couple of times now and it's useless. Is the problem with Grub? I thought it would play nicely with Win7 and at least allow me to boot into it, which is why I allowed it to overwrite my MBR. I lack a Win7 disc and cannot repair the MBR that way.
I just found it out now, after installed the skype and tried setup my web/audio on it, the webcam works fine but the mic doesn't work, so i went to the audio menu on fedora 14 and found it out the mic is dead.Someone had the same issue? Can someone let me know what can i do to fix that?
I wonder if you can help me please. I purchased an Acer Aspire One netbook running Linpus Linux on it for my daughter. She absolutely love it and so far I have managed to update Open Office to Open Office 3.0.1, installed Skype and installed Firefox 3.She has been doing her homework and would like to print it off but I can't get my Epson DX8450 to work with it. I tried installing drivers from http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do (which is where Epson tell you to go). I installed some drivers and the printer started to print it was doing some strange things like printer two lines of the same single line, missing the top off the letters and putting two line spaces in between each line.
I am all new to this but does anybody advice or even provide step by step instructions on how to install the printer (if they have this model printer themselves).Also how to I remove the drivers that I installed last night that obviously are incompatible?
I just installed Fedora 12 x86 in an Acer Aspire One D250. Everything ran smoothly and was detected upon install but unfortunately after all updates were applied to it I ended with a device with no network connection (not even Ethernet).
This appears to be kernel-related because the old kernel (stock) works as expected. The problematic kernel version is (184.108.40.206-70.fc12.i686).
Is there any known workaround for this? Or am I condemned to run this older kernel until the other one gets fixed?
Another question, in the event a new kernel comes out I'd like to keep to older one as a back up, how can I arrange that?
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
My laptop is the one mentioned in the title. And it's completely offline at the moment.
Code: $iwconfig lo no wireless extensions. Seem to have some troublesome chips. Code: $ lspci 03:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0) 05:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) code....
although in my case they should be for the 220.127.116.11-85.fc13.x86_64 kernel.
And I've been searching that repo for ages now, and I can't seem to find anything with kmod-wl or broadcom in there. I'm well aware that this is most likely because of my own ignorance as to the build up of said repo.
I newing to utilize linux I want to ask I install redhat enterprise 4 4 on laptop acer aspire 4736, and all hadware I am not detected comprise wifi card and lan card. how detects my hadware that? one again of making ad-hoc at ubuntu 7.10
i tried to install ubuntu 9.10 in my acer aspire lap. i got the ubuntu CD by parcel.i was able to select the language, then second option -install ubuntu also went rite, after that nothing is happening. how can i correct it?
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
I recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
in compliance with bonekracker's advice, i have reposted my SOS. i have the result of the outputs of the commands for ifconfig, iwconfig, and etc i have uploaded it in the file output.doc. i hope this would be helpful in debugging my problem.but before that, i do notice that if i click on the icon for the Network Manager, the Wireless networks is set to 'wireless disabled'. maybe if i can make it turn on, my wireless problem will be solved.. its just that i even if i move the switch for the wifi, it still wouldn't turn on.
The problem now is that I cant get online. I have an Acer Aspire 5720. My network card is called Broadcom BCM4311 802.11b / g WLAN. What do I do? I've googled around and found various forum posts where I'm told that I must write various things in Terminal, which have not yet worked. I have also visited this site, where this is the first step: Open System â†’ Administration â†’ Networking. But the problem is that I can not find the "Networking" under "Administration". I have no experience with Linux what so ever, Ninja-edit: I tried reading through this, but I fell off at Make the .ko file
For long I've had problems with a slow Windows Xp-laptop, so today I decided to install Ubuntu on it.The problem now is that I cant get online. I have an Acer Aspire 5720. My network card is called Broadcom BCM4311 802.11b / g WLAN.What do I do? I've googled around and found various forum posts where I'm told that I must write various things in Terminal, which have not yet worked.I have also visited this site, where this is the first step: Open System ’ Administration’ Networking.But the problem is that I can not find the "Networking" under "Administration".