opened the system>administration>bootloader guior anything just opened it)now on boot I get a timeout with an option to go to the grub configuration or boot my one and only installed versionwould really like to get rid of that and go back to booting straight to my only fedora version installed without the option to go to grub (might be useful someday, but now is not the day
View 2 RepliesI recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies View RelatedTwo days ago I decided to migrate from Fedora to Ubuntu 10.04. On the Ubuntu install I chose to format the entire disk as I do not want a dual boot system. I have three disks and have set the bios to boot from dvd, then main disk, then 2nd disk, then any other bootable drive and coming from a working Fedora I know I have my "slaves" and "Master" pin positions on the disks set correctly.
When I try to boot the fresh install of Ubuntu I do not see any menu options, no boot image nothing, I get taken immediately to a grub command window and I dont know how to fix things from there. I have tried to fix things by booting into the "try before you 'buy'" thing on the installation cd and I can see that Ubuntu has been installed on the main disk, but all in all Im stuck.
i installed ubuntu 10.10 inside windows and when i boot ubuntu a grub screen appears what should i do?
View 9 Replies View RelatedMy dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
View 9 Replies View Relatedi have ubuntu 10.04 and xp installed in two different hard disc partitions. everything was fine until i came from vacation and found that after turning on my pc it gets hang as soon as the grub menu with duel boot option appears. i cant do anything at that stage, just nothing.keyboard doesn't work also. here one thing to be mentioned that for last few days my pc used to hang frequently in ubuntu 10.04 and then i had no option left but to restart my pc.
View 5 Replies View Relatedhow to edit the grub listing that appears during computer boot.
My listing shows 3 OS:-
1. Ubuntu 10.04
2. Ubuntu 9.10
3. Windows XP
I have deleted Windows XP, meaning that my system does not contain Windows XP.
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
A couple weeks ago I installed Ubuntu Security and Recommended Updates that included an update to Linux Kernel 2.6.31-20. Upon installing these updates I was prompted to restart my computer for the changes to take effect. So I rebooted and encountered a Hyper Transport Sync Flood error each time I tried to boot, preventing me from booting into the OS.The above linked forum thread about the error suggested I manually adjust voltage settings in the BIOS to resolve the issue, so I gave it a try to no avail. Then I decided I would just reset my BIOS settings to the defaults (seeing as I hadn't edited that many settings to begin with). After doing so, I tried booting only to encounter a black screen with "GRUB _" printed on it.
I have encountered this issue before when I initially installed Ubuntu 9.10 on my system, but I'm not sure whether this occurrence is strictly BIOS setting related or if something effected my bootloader. (On a side note, resetting my BIOS settings to defaults seemed to, at least for now, eliminate the Hyper Transport Sync Flood error I was getting...and instead leave me with another problem.)I used this script created by meierfra. to provide info on my current boot setup, the results of which are displayed below.
Code:
RESULTS.txt is posted below:
Boot Info Script 0.55 dated February 15th, 2010
[code]....
After certain system-wide changes, like kernels updates, I obtain grub prompt on restart. However, if I put the hard drive into another computer (b), it boots up fine. Since, however, I use the present computer (a) regularly, I only use b to purge and reinstall grub using the chroot method. However, doing so every time is time consuming; and I cannot change anything in the defaults and run update-grub without obtaining a grub prompt on restart. How do I fix this?
View 9 Replies View RelatedIm trying to install Fedora 10 on to my HP Pavilion a340a (full product specifications: [url] ), i boot from the cd and it says "Automatic boot in 10 seconds..." etc, i get past that screen and am then at a screen with 2 shades of blue and a white bar moving at the bottem of the screen towards the words "Fedora 10", on the next screen, the log on screen, all the text is jumbled up and distorted, and everything appears frozen, except that i can move the mouse. I am not sure what the problem is but i know its not the cd because after having problems with hp pc i decided to try it on my Acer Extensa 2300 laptop (1.5ghz, 1.2gb ram, 40gb hdd, 32mb intel integrated graphics) and that installed fine, without a problem. This has led me to beleive that Fedora may not be liking the intel graphics on my HP Pavilion, and i dont know why. i really want to use Fedora 10 on my desktop. I should mention that i want to dual boot Windows XP and Fedora 10 on Pavilion, windows is already installed.
View 7 Replies View RelatedI am unable to boot my laptop in the usual way. The fedora emblem in the centre of the screen appears and starts to turn from white to dark blue in the usual way. When it is almost complete it stops.
In order to make the machine boot i hit escape and a message says leaving interactive startup mode. At this point the machine continues to start up.
When i do manage to get it to boot i get the following message repeated many times:
I should also add... The laptop will not close down, once i click switch off the screen turns blue and displays the fedora emblem in the centre. At the top right text says "Shutting Down" but at this point the system hangs.
i installed Rhel5 as dual boot with windows.after installation it worked nicely.i forgot to eject the installation dvd of rhel5 from the cdrom.while rebooting the installation menu appeared. so rebooted and eject the dvd.The problem is the GRUB loader not showing the boot menu(windows or Redhat).it shows grub>what sould i have to do, to boot
View 2 Replies View RelatedI'm having an issue where, after having just installed Xubuntu, the GRUB menu fails to appear when the USB stick I used to install it is not plugged in. Without it, pressing ESC brings me to the Windows 7 (OS dual-booting with) special menu.Is this standard behavior?Is the default timeout zero? Can I adjust GRUB to display for a long enough time to make a decision?
View 2 Replies View Relatedsince i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
How do I log all start-up text from when Grub starts to when my desktop appears?
View 2 Replies View RelatedI just booted into Linux and the Update Manager prompted me to restart. After the restart the GRUB interface I expect to see is no longer there and now it is just a command line that says press tab for more options.I have not got a clue with shell language as I have had no time to learn it as of yet. Do I need to uninstall and reinstall Linux or is there a command that can be typed that boots up the operating system.Even better is there something I can do that can return me to seeing the interface like I was used to.
View 3 Replies View RelatedI am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
Last night I rebooted my desktop and it failed as in it just kept resetting after the bios post...so I changed my boot drive which gave me a "no bootable drive found" error(this confirms hdd fault) thee I booted a live cd and checked my partitions
They are as follows
sda1 - boot(ntfs)
sda2 - windows(ntfs)
sda3 - swap
sda4 - ubuntu(ext4)
I tried to mount sda4 to reinstall grub but it failed...says the partition is corrupt sda2 has no problems and I made a backup for it now the problem is how do I perform a disk check on sda4 and how do I get my system up and running again? I dont want to reinstall!
I would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies View RelatedI've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
View 9 Replies View RelatedI have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I recently installed Ubuntu 10.10 with Wubi, however after an update was performed on Ubuntu, Ubuntu's boot options appear twice upon starting up the computer. I get the following selections:
View 8 Replies View Relatedi am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View Relatedwe have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedDesktop goes blank after boot, then re-appears when shutdown. How do I fix? I turn on computer, it starts fine with the usual green boot screen, the little bar progresses then the screen goes blank. Then when I go to turn off (push power button), the desktop re-appears. What can i do to fix? I need my desktop back (I haven't made any changes to my system since last boot, and I have turned off, pulled cables out, put them in etc...it must be a software issue) I'm using OpenSuse 11.1 Gnome 32 bit
View 3 Replies View Relatedwhen I booted Jaunty from the LiveCD, the desktop background to my Hardy install showed for a couple of seconds before the screen cleared and put the Jaunty desktop on there.This isn't really a problem, but I was curious as to why it happened (something like it has happened before with other versions, not always booting from CD IIRC) and just wondered if anyone could shed any light on it?
View 1 Replies View RelatedRecently I installed Ubuntu 10.04 in my Eee PC 1201n, dual boot with Win7. I got some error at booting, it says: nForce2_smbus 0000:00:03.2: Error probing SMB2. It not happened when I used 9.10, dual boot. After the error appearing, the system will stay still for around 20 seconds, then start to react to log in interface.Do any one meet the same problem,
View 6 Replies View RelatedI have a Dell Vostro 200. Have been running Ubuntu on it for 18 months - no probs. Recently it became very slow to boot. 5-10 minutes before Ubuntu startup screen appears. Have installed Ubuntu 10.10 (on a reformatted hard drive) today. No change. It's fairly certain to be a hardware problem but I don't know where to start.
View 3 Replies View Related