I recently installed Ubuntu 10.10 with Wubi, however after an update was performed on Ubuntu, Ubuntu's boot options appear twice upon starting up the computer. I get the following selections:
View 8 Repliesi have ubuntu 10.04 and xp installed in two different hard disc partitions. everything was fine until i came from vacation and found that after turning on my pc it gets hang as soon as the grub menu with duel boot option appears. i cant do anything at that stage, just nothing.keyboard doesn't work also. here one thing to be mentioned that for last few days my pc used to hang frequently in ubuntu 10.04 and then i had no option left but to restart my pc.
View 5 Replies View RelatedI recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies View RelatedTwo days ago I decided to migrate from Fedora to Ubuntu 10.04. On the Ubuntu install I chose to format the entire disk as I do not want a dual boot system. I have three disks and have set the bios to boot from dvd, then main disk, then 2nd disk, then any other bootable drive and coming from a working Fedora I know I have my "slaves" and "Master" pin positions on the disks set correctly.
When I try to boot the fresh install of Ubuntu I do not see any menu options, no boot image nothing, I get taken immediately to a grub command window and I dont know how to fix things from there. I have tried to fix things by booting into the "try before you 'buy'" thing on the installation cd and I can see that Ubuntu has been installed on the main disk, but all in all Im stuck.
i installed ubuntu 10.10 inside windows and when i boot ubuntu a grub screen appears what should i do?
View 9 Replies View RelatedRecently I installed Ubuntu 10.04 in my Eee PC 1201n, dual boot with Win7. I got some error at booting, it says: nForce2_smbus 0000:00:03.2: Error probing SMB2. It not happened when I used 9.10, dual boot. After the error appearing, the system will stay still for around 20 seconds, then start to react to log in interface.Do any one meet the same problem,
View 6 Replies View RelatedMy dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
View 9 Replies View RelatedI'm having an issue where, after having just installed Xubuntu, the GRUB menu fails to appear when the USB stick I used to install it is not plugged in. Without it, pressing ESC brings me to the Windows 7 (OS dual-booting with) special menu.Is this standard behavior?Is the default timeout zero? Can I adjust GRUB to display for a long enough time to make a decision?
View 2 Replies View RelatedI downloaded a debian whezzy media after installation when the system begins to boot the system appears a white screen, and not from any error.
View 2 Replies View RelatedI installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
Im trying to install Fedora 10 on to my HP Pavilion a340a (full product specifications: [url] ), i boot from the cd and it says "Automatic boot in 10 seconds..." etc, i get past that screen and am then at a screen with 2 shades of blue and a white bar moving at the bottem of the screen towards the words "Fedora 10", on the next screen, the log on screen, all the text is jumbled up and distorted, and everything appears frozen, except that i can move the mouse. I am not sure what the problem is but i know its not the cd because after having problems with hp pc i decided to try it on my Acer Extensa 2300 laptop (1.5ghz, 1.2gb ram, 40gb hdd, 32mb intel integrated graphics) and that installed fine, without a problem. This has led me to beleive that Fedora may not be liking the intel graphics on my HP Pavilion, and i dont know why. i really want to use Fedora 10 on my desktop. I should mention that i want to dual boot Windows XP and Fedora 10 on Pavilion, windows is already installed.
View 7 Replies View RelatedHave just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
After quite a bit of troubleshooting, I have only made my problems dual booting XP and Xubuntu go from bad to worse.
I installed xubuntu on my Windows XP laptop as a dual boot system. (Single 40gb Hard Disk, used xubuntu wizard to repartition XP)
After installation, Windows XP would not boot from the boot menu; it would just go to a blank screen with a blinking cursor in the upper left corner (xubuntu was fine).
So far, I have repair installed (not clean) Windows XP and used the Windows XP recovery console commands "fixboot" and "fixmbr" (fixmbr caused xubuntu to become unbootable with no boot menu) to no avail.
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
I've just installed Ubuntu 10.10 Netbook edition on a brand new Packard Bell Dot S2 netbook, and when the system rebooted after installation the netbook booted straight into Windows 7.
When I rebooted again and paid more attention to the boot process, there was no GRUB menu (like the one I get when booting up my desktop).
The Windows partition has been resized, but I can't seem to get to the new Ubuntu partition.
I've finished the installation of Debian Squeeze using Installer loader from Windows. But the Installer menu is still appear on Windows Boot Manager.
I've try to uninstall the "Installer Loader" from Windows and I got an error message about BCDEDIT (if I'm not wrong), during uninstallation process.
I ignore it, and continue the uninstallation process until complete. But, After I reboot my computer, the Installer menu is still appear on Windows Boot Manager.
I'm using Windows Vista Business SP2.
I installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.
I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.
I installed Xubuntu 9.10 with Wubi and it worked fine until a recent kernel update broke my install. I uninstalled through Windows and reinstalled Xubuntu 9.10 with Wubi with no apparent problems.When I look in C:ubuntudisks, root.disk, swap.disk, and the boot folder are both present. The C:ubuntudisksootgrub folder is empty; I don't know whether or not it should be that way.But when my computer starts, it just boots Windows Vista without displaying the menu asking me to select my OS.
View 3 Replies View Relatedi just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
[code]...
When I attempted to install 10.04 on my Toshiba A505-S6005 all appeared to go smoothly, but when the system rebooted the splash screen appeared only after a few seconds of a blinking cursor. The default desktop background appeared, and I heard the drumbeats that announce "Hello!" but there was no login menu.
Background: I have struggled to put linux on this laptop, but there have been many compatibility issues thus far. However, once I switched my hard drive controller to AHCI I was able to boot 10.04 live with no trouble.
On a regular boot I can login via Alt+Ctrl+F1, but even after I run "sudo apt-get upgrade" etc. the login fails to appear.
Furthermore, while poking around in Cli I noticed that my home folder more closely resembled the live environment (i.e, there was an examples.desktop file instead of the usual folders)
I have burned a new CD at a slower rate with a new iso, but this one yielded the same results as the first. Please help, I am currently using Win7, but I would much like to be back on Linux.
I have rebuilt my laptop to a dual boot of Ubuntu 10.10 and Windows 7 - if only iTunes would work under wine I wouldn't even have to worry about Windows, but that is the penalty for using an Apple iPod!
Anyway how do I go about about editing the boot options menu? Following the kernel upgrade in the Ubuntu updates I now have two entries for Ubuntu and would like to just tidy it up.
If it is risky let me know because I have the systems working just nice, and really wouldn't want to trash them just for something cosmetic.
My system had Windows Vista initially. I installed Ubuntu 10.04 64 bit initially and everything was fine. I was able to use both the OS. Recently I installed Ubuntu 10.10 32 bit in the same partition as Ubuntu 10.04 by dividing it into two equal halves. Now I am able to boot into 32 bit 10.10 but when I try to boot into the old 64 bit 10.04 it says unable to mount /root/proc, and some other "Unable to mount.." messages and it gives me a command prompt. I entered into 32 bit 10.10 OS and did update-grub2 and when I restart, the boot menu has no option for 64 bit 10.04 version at all... How can I restore my Ubuntu 64 bit 10.04 and boot into it..
View 9 Replies View RelatedI just installed ubuntu 11.04 via wubi. the installation appears to have gone well but ubuntu doesnt appear as an OS choice when i boot up.
Its not a timeout issue as it is set to 30sec and i can see my other options (windows and a recovery option). the only thing i can think of is that my computer has a separate partition set up for recovery and i think that is screwing things up.
Here is my boot.ini:
My only guess is that since the recovery partition is the first partition that its causing problems.
I've installed 11.04 on my laptop (dual boot with Win7). It goes through the grub boot menu and boots in ubuntu but displays ~inch wide band near the top, nothing else. I assume it is a display issue (it has an ATI mobile Radeon HD 3870 X2 card) but can't seem to resolve problem. I can boot into Windows via the menu. In the grub menu I can boot into the command line (grub>) but can't seem to make progress beyond that. Within this grub interface, it won't take terminal commands.
View 2 Replies View RelatedInstalled Ubuntu on a 40 GB partition side by side with Windows 7 currently installed. I have had this exact setup before. Problem, boot menu never shows. The system boots into Ubuntu automatically. Windows seems to be intact and accessible. How can I get the boot menu to appear at startup?
View 9 Replies View RelatedI downloaded v9.1 and chose to install it within Windows (XP). It seemed to install OK, but when the installation was complete and the machine rebooted, I chose Ubuntu on the boot screen, but all I got was the following message "GNU GRUB v1.97 beta4 - minimal BASH-like editing is supported ... etc" and an input line " sh-grub> " What's happening, and how do I get by this to run Ubuntu? This is my first attempt with Linux, and I can honestly say, I am not too impressed. Now I have a menu on booting asking if I want XP or Ubuntu. Ubuntu wont boot, so, how can I repair or how can I get rid of this boot menu to return my computer to 'as it was' before
View 5 Replies View RelatedIt would be nice to get a sticky thread up for dual boot installation issues. It seems like this is a very common problem with the upgrade from 9.10 to 10.04.
I was finally able to solve my issue dual booting 10.04 and Windows XP Home at this thread.
[URL]
I had to reinstall Grub2 and run update-grub.
Then I had to run Rescue on my XP disk. Once to the DOS command line I ran the following command:
C:Windows>fixboot c:
I rebooted and now all is well. I can boot to Ubuntu 10.04 or Windows XP from my Grub menu.
I used to be a pro at editing Grub's menu.lst file so I could have my menu look clean, simple, and easy to read. Now that I have set up 10.04 (Working beautifully now after a couple setbacks) the menu.lst file is no longer where it used to be (/boot/grub/menu.lst)
How do I edit my boot menu now?
I have multiple drives on my system and I decided to put Ubuntu on my main 1TB hard drive. I install 9.10 on my drive and it partitions half of it to Ubuntu and install is successful. Well, on reboot I get nothing. I switch to my secondary drive with windows on it already and the dual boot menu appears? Apparently it installs in on SATA1 and not the drive selected as boot in the BIOS. I decided to leave it this way until recently I needed to use the secondary drive on my other rigs failing hard drive. So, how do I get grub on the 1TB hard drive? I ran windows 7 BOOTREC files and recovered the Windows boot, but I couldn't get Ubuntu to recover with live CD nor the GRUB online help didn't work. Is there a simple way to get my dual boot menu back?
View 5 Replies View RelatedI upgraded my main box to Ubuntu 10.04 and everything runs fine, except for a problem with grub: I can't modify the boot menu in any way, I'm stuck with what grub2 thought was the optimal setup at installation time (and it got it wrong, btw). The current boot menu lists:
- my older 9.10 install in sdb2 (one kernel)
- legacy windows XP install on sda1
- my even older 9.04 install in sdb1 (two kernel versions)
- my new install in sdb3, with only one kernel (the one coming with the distro CD)
I tried anything I could think of to modify this menu:
- modify the /etc grub config file then running sudo update-grub
- using a specific app (system manager? don't remember its name)
- upgrading to the latest kernel
- removing and reinstalling grub
to no avail: the menu is still there in the above form, and I have to manually select the 10.04 (old) kernel by hand every time I reboot.