i installed Rhel5 as dual boot with windows.after installation it worked nicely.i forgot to eject the installation dvd of rhel5 from the cdrom.while rebooting the installation menu appeared. so rebooted and eject the dvd.The problem is the GRUB loader not showing the boot menu(windows or Redhat).it shows grub>what sould i have to do, to boot
View 2 RepliesI recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies View Relatedhow can i replace ubuntu logo,(white logo with black background) which comes very first while booting (it also comes while shuting down) in ubuntu 9.10. I am able to replace other images, which comes after this image. I have done it by replaceing my images with the images present in /usr/share/images/xflash.But it is not possible to replace the mentioned image by this way. Where the above mentioned image (white with black bg) will be stored?
View 1 Replies View RelatedAfter certain system-wide changes, like kernels updates, I obtain grub prompt on restart. However, if I put the hard drive into another computer (b), it boots up fine. Since, however, I use the present computer (a) regularly, I only use b to purge and reinstall grub using the chroot method. However, doing so every time is time consuming; and I cannot change anything in the defaults and run update-grub without obtaining a grub prompt on restart. How do I fix this?
View 9 Replies View RelatedI just formatted the partition that contains fedora 15 using windows.. Now when I attempt to boot my PC the grub bootloader comes up and I cannot boot anything.... The error that I get|| i feel i need a boot command to boot boot win7 from grub... grub propmts me " minimal bash-like line editing is supported. for the first word tab possible list a possible commands completion anywhere else tab list
View 1 Replies View RelatedHow can i replace ubuntu logo,(white logo with black background) which comes very first while booting (it also comes while shuting down) in ubuntu 9.10. I am able to replace other images, which comes after this image. I have done it by replaceing my images with the images present in /usr/share/images/xflash.But it is not possible to replace the mentioned image by this way. Where the above mentioned image (white with black bg) will be stored?
View 3 Replies View RelatedI've been having this glitch since Maverick. I hoped installing Narwhal would solve it (clearly not), I like Ubuntu, but this makes the OS frustrating and pretty much unusable, forcing me to stick with Windows.
The glitch appears randomly but mostly within 5-10 minutes after booting.
Another thing : when you want to screenshot the glitch, it usually gives you a perfect image, with everything OK. I have no idea why it worked now. I have a Packard Bell Dot M Netbook.
opened the system>administration>bootloader guior anything just opened it)now on boot I get a timeout with an option to go to the grub configuration or boot my one and only installed versionwould really like to get rid of that and go back to booting straight to my only fedora version installed without the option to go to grub (might be useful someday, but now is not the day
View 2 Replies View RelatedI work in a very restrictive environment and I want to use linux on my work laptop (currently running Windows XP prof). I am planning to install linux in a dual boot mode but I dont want to install grub/lilo or any other boot loader. i cannot even modify Windows bootloader to boot into linux partition.
Is there a way I can boot into linux partition without installing new boot loader or modifying the current windows boot loader? Any boot CD etc available that can boot into linux partition from my laptops HDD?
I am trying to boot linux kernel from a USB stick. I performed following steps:
1. wrote Grub stag1 to MBR of USB with this command on my linux host.
dd if=/boot/grub/stage1 of=/dev/sdb1 bs=512 count=1
2. Mounted the USB and I copied the following files in my USB.
boot/grub/stage1
boot/grub/stage2
3. Plugged in the USB in the the target machine. Rebooted and changed the booting sequence to boot from USB
My problem is that instead of getting a boot prompt, iIam getting GRUB GRUB GRUB all over the display. I googled out for it and found that if we change the auto-detection oh HDD in bios to manual that may solve the issue, but that did not help. If you happen to know that I am following the correct steps and in right order please point me how can I resolve this issue of GRUB.
I'm having an issue where, after having just installed Xubuntu, the GRUB menu fails to appear when the USB stick I used to install it is not plugged in. Without it, pressing ESC brings me to the Windows 7 (OS dual-booting with) special menu.Is this standard behavior?Is the default timeout zero? Can I adjust GRUB to display for a long enough time to make a decision?
View 2 Replies View RelatedI'm triple booting (windows, ubuntu and osx86) at the moment but in order to load OSX86, I need to pass "cpus=1" to the kernel otherwise it won't load and the PC just reboots. Can I pass this argument from grub or do I have to install osx to a separate hdd and get grub to load the Darwin bootloader on the second hdd and then pass the argument?
View 1 Replies View RelatedI am having issues booting my LFS system on my hp nc8230 notebook running LFS SVN. Grub was built and installed per the book. My file system is almost as simple as it gets:
/dev/sda1 is swap
/dev/sda2 is my LFS partition /
The LFS live cd still uses the now deprecated drivers for HDD's thus as far as the livecd is concerned my block devices is (hd0) and /dev/hda2 for the root respectively. However the kernel to be booted runs on the newer drivers thus on boot my block device should be referenced as /dev/sda2 for the root. Grub is in fact installed on the MBR what happens is right when my system boots I get a file not found error the grub CFG is pointing to the correct block device and root partition from what can be seen by looking at the grub.
Is it possible that grub can load usb driver because BIOS of my computer is 10 or more years older. Currently in grub if I run
root (<press tab>
I get
fd0 hd0
meaning so far floppy & hard disk can be accessed. I am using ubuntu 8.04 .
I have FC8 on my laptop and then I wanted to test Ubuntu 8 so I installed Ubuntu and it removed the grub loader of Fedora then I repaired fedora with DVD and then it removed Ubuntu Grub. So how can I have two OS in one grub loader.I found grub.conf file in FC but couldnot find it in Ubuntu.
View 3 Replies View RelatedI installed Lucid Lynx on my laptop a couple of months ago and for the most part everything was working fine. However, just recently the computer doesn't seem to be booting up at all. I start up the machine and then a black screen appears with the text: init: ureadahead main process (306) terminated with status 5 the (#) is different in some boot-ups
And the computer just hangs there. typing anything doesn't seem to help at all. I press enter and a new line just appears. I've left it there for hours and still no login screen.
Two days ago I decided to migrate from Fedora to Ubuntu 10.04. On the Ubuntu install I chose to format the entire disk as I do not want a dual boot system. I have three disks and have set the bios to boot from dvd, then main disk, then 2nd disk, then any other bootable drive and coming from a working Fedora I know I have my "slaves" and "Master" pin positions on the disks set correctly.
When I try to boot the fresh install of Ubuntu I do not see any menu options, no boot image nothing, I get taken immediately to a grub command window and I dont know how to fix things from there. I have tried to fix things by booting into the "try before you 'buy'" thing on the installation cd and I can see that Ubuntu has been installed on the main disk, but all in all Im stuck.
i installed ubuntu 10.10 inside windows and when i boot ubuntu a grub screen appears what should i do?
View 9 Replies View RelatedI've got new version of grub from the newest linux. Do you know how to disable quiet booting ? Because I've got problem with my graphics card and to fix it I need recovery mode.
View 1 Replies View RelatedI have a computer with several Linux variants installed, each of them using a GRUB or GRUB2 setting.
How can I identify which GRUB setting is used when booting my computer?
I am a bit confused about a dual booting system. I Already have windows 7 on my computer and wish to install ubuntu 11.04 but I keep reading about Grub 2. Does grub automatically install with ubuntu or do I need to install it prior to installing ubutu ?
View 10 Replies View RelatedHow do I log all start-up text from when Grub starts to when my desktop appears?
View 2 Replies View RelatedI just booted into Linux and the Update Manager prompted me to restart. After the restart the GRUB interface I expect to see is no longer there and now it is just a command line that says press tab for more options.I have not got a clue with shell language as I have had no time to learn it as of yet. Do I need to uninstall and reinstall Linux or is there a command that can be typed that boots up the operating system.Even better is there something I can do that can return me to seeing the interface like I was used to.
View 3 Replies View RelatedI am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
My dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
View 9 Replies View Relatedi have ubuntu 10.04 and xp installed in two different hard disc partitions. everything was fine until i came from vacation and found that after turning on my pc it gets hang as soon as the grub menu with duel boot option appears. i cant do anything at that stage, just nothing.keyboard doesn't work also. here one thing to be mentioned that for last few days my pc used to hang frequently in ubuntu 10.04 and then i had no option left but to restart my pc.
View 5 Replies View RelatedLast night I rebooted my desktop and it failed as in it just kept resetting after the bios post...so I changed my boot drive which gave me a "no bootable drive found" error(this confirms hdd fault) thee I booted a live cd and checked my partitions
They are as follows
sda1 - boot(ntfs)
sda2 - windows(ntfs)
sda3 - swap
sda4 - ubuntu(ext4)
I tried to mount sda4 to reinstall grub but it failed...says the partition is corrupt sda2 has no problems and I made a backup for it now the problem is how do I perform a disk check on sda4 and how do I get my system up and running again? I dont want to reinstall!
how to edit the grub listing that appears during computer boot.
My listing shows 3 OS:-
1. Ubuntu 10.04
2. Ubuntu 9.10
3. Windows XP
I have deleted Windows XP, meaning that my system does not contain Windows XP.
I have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
View 2 Replies View RelatedI run alot of Linux running in memory. Mainly by PXE booting a kernel and the entire OS as the "initrd" file.
I have a RHEL6 image running as a VirtualBox guest and the entire OS (minimal) is contained withing 1GB of disk. I wan't to boot the entire /dev/sda1 "/" (its the only partition on the drive, no swap) as the initrd file and run everything from memory. But grub won't let me. So before I try and re-invent the wheel I thought to post here first.
Details. RHEL 6 as guest in VIrtual BOX. configured with 3Gb memory. HD is single partition and known as /dev/sda1.
at the grub console. I issue
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-19.el6.x86_64 root=/dev/ram0
initrd (hd0,0)
But the grub windows just freezes. Apparently it doesn't like the fact that I've referenced the entire partition (hd0,0) as the initrd. Any thoughts? Or any better boot loader like SYSLINUX?
BTW, I am not worried about the /etc/fstab mentioning /dev/sda1 at this point, I have a fix for that already. I would like to see grub load up the partition as an initrd.