I have fedora 10 and I rotated my display upside down using Display settings (I don't know if it is the same thing as system-config-display, I had an icon called Display settings on my panel). It didn't work, my screen became black and now I can't change it back. Can I somehow change it back using terminal only? There's no rotation set in my xorg.conf file, I tried to set different rotation in xorg.conf, but it had no effect.
View 2 RepliesFedora 12 64-bit
Asus mobo M4A78-E
Samsung 2494HM display
The captioned display support 90 deg rotation. Which software do I need to install?
Tried editing /etc/X11/xorg.conf as;
Not sure how to explain it.. if I line up my screen perfectly with the light it absorbs just about enough light to make out the outline of the login screen.. seems like the pixels are setting the right colors but the light in the screen isn't turning on if that is possible. If I enter the GRUB menu and load 2.6.35-28-generic it works fine.. the latest doesn't though... so the question.
1) How do I fix this for the latest version?
- or -
2) How do I auto-load the 2.6.35-28-generic version permanently?
Anyone noticing intermittent problems with the screensaver not kicking in or the display not sleeping? This is in gnome under F11.I have the Power Management Preferences set to put the display to sleep after 30 minutes of inactivity and gnome screensaver is configured for 5 minutes idle time.On a regular basis, I'll leave my computer come back anda) the screensaver hasn't kicked inorb) the screensaver kicked in, but the power management features didn't kick in to put the display to sleep.It seems to be an intermittent problem and usually it goes away after I restart X, but then at some point it comes back. In the past, I've gotten in the habit of being logged in for weeks/months at a time but I find that I can't go more than a few hours without logging out and back in or else the screen won't go to sleep.
View 14 Replies View RelatedI am trying to edit a postinfo.xsl in my root file dir, and with the command:
frank@linux-avnb:~> sudo gedit
(gedit:14150): Gtk-WARNING **: cannot open display: frank@linux-avnb:~>
I get the following. what am i doing wrong?
I have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
[Code]...
I am running a dual monitor setup, and prefer to have my secondary monitor rotated 90 degrees. I am able to do this in Gnome using preferences, and am wondering how to accomplish the same in XFCE.
View 6 Replies View RelatedI have configured /etc/syslog.conf for writing user level log messages, and it is working fine.
The line which i entered is: user.* /home/shekhar/obj/myjob.log
But the log file keeps increasing. I would like to rotate the log file when it reaches 100Kb.
How do i do that in red hat linux ?
I have a big LCD screen.I make it 90 degrees retated to play games .But I want to know :if I can get rotation in boot up? I'm using Fedora 12 in KDE. My screen display driver is Intel . I think can write something into /etc/X11/xorg.conf to make it,or write into KDE's init script /usr/bin/startkde ( if there is a command like"rotate 90",then I can write it here).
View 3 Replies View RelatedI have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
When i open the Browser FireFox and enter the URL http://localhost/TemplateSystemCore/bin/index.php no PHP Errors will be displayed. If i do Right Click View Source Code it is total empty.
I am using Netbeans to edit a PHP Project. The Project is located in /home/martin/NetBeansProjects/TemplateSystemCore btw. /home/martin/NetBeansProjects/TemplateSystemCore/bin
The Project is usein a .htaccess file with Rewrite Rules.
I edited the php.ini and set all display errors to On.
I also edided the http.conf and set display errors On. But nothing helped. Have anyone a Idea why my Brwoser isnt printing any PHP Errors? At least a <html> Tag should be on the Source Code. But its also empty.
When i open an Terminal and do this code...
i have made partitions using fdisk , in fedora as / , /boot , /home but when i used fdisk -l it doesn't display the names of partitions , how can i made it work so that it displays
/dev/sda1 /
/dev/sda2 /boot
/dev/sda3 /home
I have XFX ATI-HD5670 and use proprietary catalyst 11.2-1 in 64-bit Fedora 14.
I am not sure when this started, or if it ever did work before, but when I started noticing that the screensaver will not turn off the monitor, I set the gnome power manager to make the monitor sleep after an hour.
Now, the display will not turn back on after it has been in sleep mode. I know the system is still running fine as I can ssh from another PC and see that everything seems to be normal, no error message in dmesg, /var/log/Xorg.0.log, etc.
/var/log/Xorg.0.log shows that monitor DPMS is not detected but still enables DPMS:
Is this a problem with catalyst driver? I know it's not the PC or the monitor, because I have a 2nd PC with the same video driver with the same problem, but others without this driver don't (ati open source, nvidia, etc. all work fine.)
I'm wondering if the problem always existed before, but I just didn't notice it because the display sleep mode was never set? If that's the case, my hunch is that it looked like it worked because the monitor was smart enough to turn itself off when the screensaver kicked in and just showed a blank screen, and the video driver was never involved with sleep mode until I set it in gnome power manager, at which point it started showing this problem of not waking up? And because the screensaver was no longer set to blank the screen, but to show some animation, that's why the monitor will never sleep anymore?
When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now
View 5 Replies View Relatedgave it a couple downloads...couple burns... both just stall at boot
View 1 Replies View RelatedI have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies View RelatedI'm using Fedora 9, I've just installed Bluefish, all hunky dory till I press "View on Browser" Button nothing happens. I've tried few cods like these; /usr/bin/firefox -new-window "%s" & %s. But No success.
View 2 Replies View RelatedFedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
I just found it out now, after installed the skype and tried setup my web/audio on it, the webcam works fine but the mic doesn't work, so i went to the audio menu on fedora 14 and found it out the mic is dead.Someone had the same issue? Can someone let me know what can i do to fix that?
View 14 Replies View RelatedI have winbind Active Directory authentication set up on my laptop. AD authentication works like a charm, passwords cache, etc. I can use sudo with no problem. However, I cannot use the root account -no matter what I set the root password to, the system will not take it. I also have a couple of normal system users (not winbind), and no matter what I set their passwords to, I cannot login.
View 4 Replies View RelatedI just installed KDE through gruoinstall command on my F12. I can't use the vertical scroll bar on the touchpad of my laptop. Also I wanted to change the shortcut to window menu. It's Alt+F3 whereas I am comfortable to Alt+Space like in GNOME.
View 6 Replies View Relatedi just installed fedora 12 on my computer. installation went perfect, even tweaked it a little bit and everything works; except for flash player. i installed it by following some guide and i can watch videos vids and all, but sometimes the videos video player doesn't respond to my mouse. i can click on play/pause but it gives no response whatsoever; i can click on the sound but it gives no response whatsoever. sometimes it all works perfectly, but when i click on the next vid it suddenly doesn't respond anymore.
View 3 Replies View RelatedFor some reason Ctrl+Alt+Fn doesn't work on my Fedora 13 workstation using the nvidia driver. I specified the following in my xorg.conf but it doesn'tption "DontVTSwitch" "off"It is probably not even an Xorg problem because VT switching doesn't work in runlevel 3 either.
View 4 Replies View RelatedI'm using fedora 15 (since its beta), i have had decent experience with software installs and updates and did like gnome 3 Now, coming to the point I have installed linuxdcpp from the standard fedora15 repo "it just doesn't work!!" I can't download filelists or search while others can , i have tried to find similar problem and used their solutions but all was in vain, for instance a guy had similar problem and had recived advice to change incoming connections to firewall manual from active and give ip adress in external/wan (or something ) but it just didn't work even if no one is able to solve this problem , i would appreciate, if someone tells me what exactly is going wrong (or some definitive idea)...
not brag or compare linuxdcpp "just works" in all ubuntu versions from 10.04 through 11.04.honestly this is really annoying i can't easily share files with friends .... ( i had to use dropbox for this!just because i chose a true free gnu/linux ..
i was workin on my rmi programs today in my f12,and then i executed all the files related to the program,it did get executed! but when i type the command start rmi registry that is to start the registry system,it fails to does so:
heres the o/p:
start: Unknown job: rmiregistry
the programs luks perfect and even got executed,sorry if the question is silly to be asked over her! i am completely new to fedora!
su to root,
init 3
no errors, no nothing acts like it take the command, but nothing happens.
trying to install nvidia drivers which won't run unless all the xwindows are shut down.
Nvidia either works or it doesn't work under Fedora 10 64 bit OS. I have re-installed Fedora 10 64 bit and Fedora 11 64 bit 10 times each and it's getting real old. I keep erasing my system because Nvidia doesn't want to work. Leighs post does no good on this issue and neither does anyone else's or else it would work.
View 2 Replies View RelatedI have a 5 button mouse and the 4th and 5th buttons are useful for skipping back or forwards while surfing with Firefox. It would be nice if I could skip back in Nautilus too, but it doesn't work. (Alt+LeftArrow & Alt+RightArrow as keybord equivalent) Is there a possibility to use this buttons in Nautilus too?
View 6 Replies View RelatedMy desktop is a Compaq CQ5110F. It's a dual boot system and Fedora 11 resides on sda3 of hard disk (WD 3200AAJS-6).Both suspend and hibernate don't work, but the symptoms are different. For hibernate, after resume, there are some messages (??) about register errors quickly flashed on the screen, then the logon window shows but the system hangs. For suspend, I cannot wake up the system by hitting some keys on the keyboard. After I press the power button, LCD doesn't get any signal. I remember hibernate worked when I was using Fedora10, but wireless card did not automatically reconnect at that time. Also hibernate works fine for vista.
View 1 Replies View RelatedI'm trying to plug my Cinemizer video goggles [URL] to my notebook. The resolution is 640x480 (yeah, I know) and I go from VGA to RCA to 3.5, which is needed by the device. From a cable oriented viewpoint this should work, but Fedora doesn't recognise the googles as a second monitor. how to enable vga output with a 640x480 resolution? This is extremely important for me since I need it for a personal project as well as for my work.
View 2 Replies View Related