So I am attempting to get linphone up and running for a research project. I am a beginner with Fedora and fairly inexperienced with computers. I was wondering if there was anyone with a vast knowledge of linphone who could help me get set up.
View 2 RepliesI had just installed linphone in Fedora 10 using # yum install linphone and face the following problem. I installed linphone in 2 clients via LAN and using IPv4 address, I am able to call each other. However when I changed the preference to use IPv6 in the network (the network support IPv6), I am not able to call to each other using IPv6 address.
View 6 Replies View RelatedI installed Linphone from the repositories and got it working, apart from the video, investigation showed that there is no support for video. how to fix this before I install from source (which I have never done ) so that I can have a fully working piece of software. I am using a fully updated version of Fedora 15.
View 2 Replies View RelatedI am trying to set up linphone for testing voip performance. Essentially I am a beginner with linux. I picked Fedora based on the recommendation of a friend. I am running Fedora 12 and I need to get linphone up and running with a working registrar. I have no idea what to do so I turned to hours of research which yielded little results but I did thing to try using partysip. I would like to know if this is a wise choice and if it is what do I do to set it up?
View 2 Replies View RelatedI had tried searching the forum for related sound help but to no avail. Thus i posted here in hope to get help.
I had been using fedora 12 since it release and been working wonderfully. Untill my last 2 update, my Voip softphone like twinkle, ekiga and linphone somehow have no sound out from speaker.
1. i can play all video and music with sound coming out from my laptop inbuilt speaker.
2. for twinkle, ekiga and linphone, there's no sound out from my laptop inbuilt speaker.That means, when i call a person, that person can hear me talking (my mic working good) but when he talk i am unable to hear him as no sound coming out from the speaker.
Note: i had call multiple different people and the result is the same.
I am on Gnome desktop with PusleAudio install and running since the releae of F12.
I am trying to get a git repo up and running for a project. I currently am running git-daemon through xinetd, and can pull from the repo but not push back to it.
/etc/xinetd.d/git-daemon currently looks like this:
Code:
service git {
socket_type = stream
wait = no
user = gitman
group = gitman
server = /usr/bin/git-daemon
server_args = --inetd --reuseaddr --base-path=/home/gitman/root --export-all
--enable=receive-pack --verbose --syslog /home/gitman/root
log_on_failure += USERID }
And /var/log/messages looks like this:
Code:
Jun 15 15:25:14 dev1 xinetd[27922]: xinetd Version 2.3.14 started with libwrap
loadavg labeled-networking options compiled in.
Jun 15 15:25:14 dev1 xinetd[27922]: Started working: 1 available service
Jun 15 15:25:43 dev1 xinetd[27922]: START: git pid=27927 from=209.XXX.XXX.106
Jun 15 15:25:43 dev1 git-daemon[27927]: Extended attributes (22 bytes) exist
<host=dev1.aea.us.com>
Jun 15 15:25:43 dev1 git-daemon[27927]: Request receive-pack for '/EPA.git'
For some reason, the push request goes through, then stops and hangs. I went to lunch for an hour, and still nothing.
I'm using a HP 7100 laptop and have tried installing the latest versions of Suse, Mandriva, as well as Slakware and have repeatedly been faced with two problems: .1. No Sound: Research via the web suggests that the lack of sound MAY BE due to the particular HP laptop model but there is a doubt here. Sound does work with the Winow$ 7 software but it does not work with any of the above noted Linux softwares. Are any of you familiar with this? .2. KPPP: Are any of you using KPPP with the latest version of Fedora, using KDE4? If so, how did you get it to work?
View 1 Replies View RelatedI am doing a small research using Kismet. I need help configuring Kismet with my Asus A52J. The Wireless card in my laptop is AR5B95. When I start Kismet I get the following error
[Code]...
What command can I use to get a research app to auto start under wine?
I have tried:
Code:
wine /directory/app.exe
It does not work
Suggest some thrust areas of research in Linux .
That what topics can be taken up for research
During my research on enabling composite effects and xinerama, I stumbled upon a few threads and discussions which showed xserver 1.10+ has resolved the conflicts between the 2 modules. I'm wondering if anyone knows of someone/somewhere to get a SUSE compatible build of xserver 1.10+ ? If not, could someone point me toward an easy-to-follow tutorial on how to build packages for SUSE?
View 5 Replies View RelatedI have installed Linphone 3.2.1 for linux on my Lubuntu netbook but have any clue how to configure my voipbuster settings. Have searched the internet but did not find any guidance for this version of Linphone and the documentation on the Linphone website on this subject is very poor.
View 3 Replies View RelatedI've created a GUI for my voip software wherein i'm using the source code of linphone 3.3.2 for video and all protcol stuffs . It is like i've got my own gtk GUI instead of the linphone's glade . Hope you get the picture of what i'm doing . I would like to know how to compile the source code since because i do not know about make files and stuffs . Kindly help me solve this .
View 2 Replies View RelatedI recently want to study the source code of linphone, and I should install it on my debian lenny linux first. I can install it by apt-get install linphone without any trouble. but like i said above, and I should install in by source code.well, the configure did not goes wrong, but after I typed "make", errors come to me, I know this is the error about the lib's. but i do not know which one did I miss,any one could tell me what the libs are they when I use the source code compile ????
View 3 Replies View RelatedBefore I go any further I must admit that I'm pretty rubbish at setting these up, so please be gentle!
Now my problem; I have a normal desktop pc (I don't want to set it up as a server) but when I check the hardness of my set up with Gibson Research Centre, it fails. It can see ports 22,23,80,443 as closed but still visible.....? I have never had this happen to me before and struggling my way through yast firewall tool, I can find no easy way of sorting this out.
Where is Eclipse PDT? I have installed F12 with all Eclipse packages including PDT but I can't create a new PHP project!
View 1 Replies View RelatedDoes Project M work on Fedora, and if so, what desktop. I suspect it might work on Gnome but not LXDE. I have an Intel graphics card so that should be OK.
View 2 Replies View RelatedI downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
First little history here: First tried Suse 7 years ago, or something like that. Not used actually, was collecting dust on second partition. Then after view years switched Ubuntu 5 or 6 or something. Used it for view years on my desctop. Linux only. No dual boot nothing. Then bought a mac mini. Played with OSX for view years. While following lessons of Fedora and CentOS. Then Win7 came out. Used it for view years. To be kind of up to date.
Now:
a view month ago i installed Russian Fedora Remix on a mac. I a sence of completely switching back to linux. I dont want to use OSX for example simply because you get used to what u use. So i tough ill run lets say Fedora on my desktop at home and workstation at work. And surely CentOS on server('s). For glpi for example, or wahtever else. Fog maybe.
The trouble: Ive installed Russian Fedora Remix and then installed EasyLife Project on it. Everything runned fine for view month. Then view weeks ago it stated to refuse to update because of package conflict. On Russian Fedora Remix forum ive got an advise to remove the conflicting package. (Alsa). When i removed it, it removed also one gig dependencies. Now gnome and kde do not log in. Only openbox and enlightenment work. Browsers do not work. And i doubd something else works at all.
THe question: I wondered what are the proc and cons of the RPMFusion enabled by EasiLife project and Russian Fedora Remix repos. Because RFR repos already contain non free codecs and so on. My first tough was that maybe it would be more interesting to use Russian repos because maybe they would be littlebit later in updates. So if an update brakes something. It can be fixed before it was added there. Im Russian by the way, thats why im interested in this version. Althou what is more of concern to me is that RFR contains all the codecs out of the box. For me on the PC its RFR or SuperOS that are interesting. The rest are details. But then, my second though was that maybe RFR might also be kind of purer then EasyLife project. I mean i remember the days when people on Ubuntu forums were against Automatix. Offcourse i expected EasiLife project to be more cosher maybe. Maybe because its fedora finaly not ubuntu. I always tought that fedora forums are kind of more professional but, what is not so good, less friendly compared to ubuntu. Thats was my impression. And also ive been already suggested on the fedora irc to not use easylife project. I actually installed it on RFR mainly because of a habit of installing it on fedora. And because of a theme. But that is not a concern anymore. Cuz ill costumize it anyway.
How do I get the contents of .plan and .project files to show up using the finger command for regular users? As it stands with the setup I have in Fedora 12, only the user in question and the superuser can see them when they finger the user. Everyone else gets "no plan". I've tried chmod .plan o+rwx and chmod .plan a+rwx to no effect.ur.
View 1 Replies View RelatedI recently installed Fedora 12 and attempted to create a new java project in Eclipse.I used the 'eclipse' command in the terminal to start eclipse. It starts fine, however, there is no 'java project' option after choosing 'File->New Project'. Only CVS and General projects. I am not experienced enough in programming to understand the relevance/usage of either of these project modes, and only want to be able to write java programs in Eclipse.
Also, does the eclipse that is run from the terminal support c++ development? I have attempted to download eclipse for C++/C developers, but cannot get it to run. Which eclipse is running when I type 'eclipse' in the terminal? Is there a way to make it so I don't have to run this command from the terminal to load eclipse?
I have a project built on Silverlight 2.0. I installed Fedora 13 (KDE) a few days ago since I'd like to brush my Linux skills after a long Windows-only time.I installed the monodevelop package and it's dependencies. But while building this project I got the following error:
Code:
Error: Framework 'Moonlight / Silverlight 2.0' not installed.
But I can't find a Moonlight package in PackageKit. Does one exists? Should I download it from Mono Project and build it manually?
Tomcat6 is built in server with it but i dont know how to use it .I am doing a dynamic web project based on servlet and eclipse galileo is being used as IDE for it.
View 1 Replies View RelatedOn Debian, if I want to compile some package X myself, but I don't want to spend time hunting down and installing its dependencies, I can issue the following command:
Code:
apt-get build-dep X
And apt (so long as it knows about package X) will install all the dependencies for me.Does the yum package manager on RedHat-based systems have a similar feature?
After "yum install emacs" & "yum install emacs-ess", I was able to install emacs on my X86_64 running Fedora 10.
If I run one session of emacs everything works fine.
Once I start a second session and try to resize or move the emacs window, the system stops responding.
What's the best way to research computer hardware? Anybody got a favorite website? I think I used SharkyExtreme maybe ten years ago. I have some parts but I need a motherboard, processor, and video card, and a case. I haven't been keeping up on this stuff. I have no idea what level computers are at these days.
View 1 Replies View RelatedI am trying to install madwifi on fedora 12. I am getting following error which i "make" the project.
[code]...
I have been searching for information about the ways Debian allows for anyone wishing to give a helping hand to the project. I found that joining maintainer groups, helping in writing documentation, bug reporting and financial help are all accepted, but what I intend, was never mentioned.
Is it possible to help Debian by submitting original source code? Yes, it is true that I contacted GNU about this, but the decision is still mine, and GNU is not binding me to give my source to them.
The source code I am talking about, took more than a year to complete and debug, and has been working without problems for more than ten years. Furthermore, it has no dependences as it does NOT delegate part of its functionality to other existing projects.
Although, I am still in my early forties, and as far as I know, I don't have any life threatening illness, we are all mortal, and I don't want my work, that took many months of hard work and concentration, to be erased to make room for the only operating system my heirs know.
I am an undergraduate anthropology student doing research for my dissertation on the F/OSS community.I'm interested in are forking (What sort of thing causes/averts a fork? Have you ever participated in one?), the process of decision making (Is consensus democracy effective? Where do communication structures often break down?) and any other reflections or thoughts that you think are relevant.
View 3 Replies View Relatedalso some options in menues are disable..when i go to the terminal it shows this msge:<unknown program name>(5763)/ KDevelop::allocateRepository: picked duchain directory "/home/forensic/.kdevduchain/{61e2fad9-a888-45c7-91e7-c7098bc67b94}/0"maybe i made mistake in one step of compiling it..
View 11 Replies View Related