Fedora :: No Sound: Research Via The Web Suggests That The Lack Of Sound?
May 30, 2010
I'm using a HP 7100 laptop and have tried installing the latest versions of Suse, Mandriva, as well as Slakware and have repeatedly been faced with two problems: .1. No Sound: Research via the web suggests that the lack of sound MAY BE due to the particular HP laptop model but there is a doubt here. Sound does work with the Winow$ 7 software but it does not work with any of the above noted Linux softwares. Are any of you familiar with this? .2. KPPP: Are any of you using KPPP with the latest version of Fedora, using KDE4? If so, how did you get it to work?
View 1 Replies
ADVERTISEMENT
May 27, 2010
Just installed fedora 13. Everything is great except for the total lack of sound. I'm trying to use the onboard audio. Motherboard is asus M4A89TD. In alsamixer all of my devices are turned on to max.
Code:
$ lspci | grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
05:00.1 Audio device: ATI Technologies Inc HD48x0 audio
Code:
$ lsmod
Module Size Used by
tcp_lp 2055 0
fuse 54749 4
ipt_MASQUERADE 2208 1
iptable_nat 5420 1
nf_nat 19059 2 ipt_MASQUERADE,iptable_nat .....
When I open pavucontrol, under output devices it lists 'HDA ATI HDMI Digital Stereo (HDMI)' and 'Internal Audio Analog Stereo'. I think the correct device needs to be the the ATI SB one, but is missing from the list.
View 14 Replies
View Related
Feb 22, 2011
I was minding my own business watching loombo and just like that the sound cut out. so I was like okay I will watch it on mega video and no such look no sound there too so I checked my ..... and that wont even load videos.so !I'm running the latest version of ubuntu on my dell insperon laptop if this helps
View 3 Replies
View Related
Jul 19, 2011
I have a Dell XPS 15 laptop and have installed Slackware 13.0 on it. I'm not getting any sound through the speakers. I tried configuring alsa first. However, I did not have any success. Next I also tried inserting some kernel modules corresponding to sound drivers, which was present in /lib. Again, I'd no sound output.I can get sound through earphones though.I've been stuck with this problem from some time.
View 14 Replies
View Related
Aug 3, 2010
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
View 4 Replies
View Related
Mar 24, 2010
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
View 7 Replies
View Related
Jul 28, 2009
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies
View Related
Jun 21, 2009
Installed Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Below are the configuration details.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphic(rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02
code....
View 4 Replies
View Related
Jul 3, 2011
I don't know what I did but I lost all audio. I'm running F15 with gnome 3. By opening system settings and then sound I don't find anything muted. Under hardware I have 3 devices, the first is RS880 Audio Device (Radeon HD 4200) this one has no sound at all when I click test speakers. Then I have quickcam comm STX and then I have Internal Audio which works by clicking on test speakers.. I have no clue of where to start to fix this but reinstall everything again.
View 1 Replies
View Related
Jun 12, 2010
My PC has the ASUS P7H55-M SI motherboard with the audio chipset VIA VT1708S. Under Fedora 13 (64-bit) I have no sound although the audio chipset seems to be properly recognised and supported by the OS.
I used the alsmixer application and I set the volume for all channels, including PCM to their maximum value but still I get no sound. When the OS boots I hear a "click" sound coming from the audio chipset when it is initialised by the kernel but then the sound stops and I hear nothing.
Note that I do not have this problem with Ubuntu 10.04 but I have the same issue with openSUSE 11.3 Milestone 7. My guess is that F13 and openSUSE 11.3 having newer kernel/alsa software versions exhibit this problem due to some bug introduced to the code.
Here is some extra information:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
[Code].....
View 1 Replies
View Related
Nov 8, 2010
Sound problems in Fedora 14.
Before Fedora 14 i have Fedora 12 and all was ok with sound. Starting with root account surprize i have sound. But after playing a song in xmms, sound is dead. I have tested sound in Windows and is ok.
View 2 Replies
View Related
Jan 14, 2011
if so I shall have to abandon it again. I have a Motherboard Gigabyte GA-MA74GM-S2, which has an integral sound card. I can't put another sound card in as I have no spare slots.
View 3 Replies
View Related
Dec 9, 2010
I've followed the steps outlined in the Fedora FAQ regarding sound issues. I am attempting to play some MP3 files using RhythmBox, and there's no sound. I have dug a bit deeper. I've tried alsamixer, and when I press F6 (Select Sound Card), I see three entries:
- (default)
0 HDA Intel
1 HDA NVidia
I have tried selecting a different sound card. When I select 1, I see this text: "This sound device does not have any controls". I have an NVidia GeForce 480 video card, but it has been suggested to me that I don't want to use it for sound. My speakers are in my monitor. I would assume that has ramifications on how I set things up for sound within Fedora. I have used some kind of sound test utility by executing this at the command prompt:
"speaker-test -c 2 -t wav".
I hear nothing. I don't know what to do next. If anyone can IM with me using Pidgin, that would be perfect
View 3 Replies
View Related
Apr 25, 2010
I've got an urgent problem! I had some viruses as my program told me and in the end I had to restart my eee pc!Problem is now after it starts and you click on the log me in icon for the netbook it makes the nice hello sound, takes some time and then does the shut down (goodbye) sound. So basically the netbook booted already right? But I cant log myself in! What can I do?
View 9 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Dec 20, 2010
I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies
View Related
Jun 7, 2011
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
View 4 Replies
View Related
Jul 5, 2011
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies
View Related
Mar 7, 2010
I installed Mangler and one of its requirements was pulse-audio. I installed pulse-audio everything worked great except i couldn't get sound out of wow if i started mangler first and vice-versa. I then found a version of Mangler that worked with alsa. So i uninstalled mangler and pulse-audio, installed mangler-alsa. Everything works great now. The problem is when i uninstalled Pulse-audio i lost all my sliders in Yast > Hardware > Sound > other > volume. The only thing that shows up is master volume > Test. My sound works great just can't adjust anything. How do i get my sliders back. I would like some advice before i screw something up. (lol) My Sound card is according to sound configuration SBx00 Azalia(Intel HDA) - Driver snd-hda-intel.Opensuse 11.2 KDE 4.3.5
View 2 Replies
View Related
Mar 19, 2011
I have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
View 4 Replies
View Related
Jun 14, 2011
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
View 9 Replies
View Related
Aug 17, 2010
sound card is working well inside SuSE and everything is ok there. But when I install Windows 7 or XP inside Xen Virtualization software, I can't use sound card and Windows is unable to find any sound hardware.
View 1 Replies
View Related
May 1, 2010
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies
View Related
Jun 10, 2010
I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
View 1 Replies
View Related
Nov 29, 2010
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
View 1 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
Mar 5, 2011
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies
View Related
May 8, 2011
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies
View Related
Jun 22, 2011
Strange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
View 2 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
