I tried to install Fedora 12 on my machine using the Fedora-12-i386-DVD and get the following error: /sbin/load_policy:error while loading shared libraries: lib/libsepol.so.1: cannot read the file data:input/output error exec of anaconda failed install exited abnormally [1/1]
View 2 RepliesI installed a software that is used for modeling purpose. After installation, it showed me the following error.
error while loading shared libraries: libXm.so.3
I hope i need to install some libraries. While i searched in google, i found some postings telling i should intall libmotif3 and some postings telling that openmotif should be installed. I dnt know what to do now as i dnt find both these libraries when i try to install with yum.
Someone kindly write me how to get this libXm.so.3 installed in fedora10.
I just installed fc14 on my laptop and am trying to install (mandelbulber) but i get this error.
Quote:
Mandelbulber install problem: error while loading shared libraries: libjpeg.so.8: cannot open shared object file: No such file or directory
Trying to launch Second Life gives the following error message:
You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux
This problem was easily found using search with solutions for Fedora 11.
The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.
The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.
"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."
Another post says that was all unnecessary as the following commands would do the same thing.
Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)
The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".
Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.
A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.
Just trying to install Skype on Fedora 12 .. but got an error: skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory So, anyone got it working there ?
View 9 Replies View RelatedI try running syncevolution, but it wont work for some reason.
In command line I get this error:
Syncevolution and evolution are installed in latest version (syncevolution: 0.9.3 evolution: 2.28.0).
I'm trying to get ePSXe installed but I'm getting the following error
Code:
[root@fedora ePSXe]# ./epsxe &
[1] 21678
[root@fedora ePSXe]# ./epsxe: error while loading shared libraries: libXt.so.6:
[Code].....
I am using fedora 15 / 64. I installed skype from this tutorijal http://blog.randell.ph/2010/11/17/fe...llation-setup/.
When I try to start it I receive this
Code: skype: error while loading shared libraries: libXv.so.1: cannot open shared object file: No such file or directory
I am getting this error while installing NS-2.1b9a in fedora 8.0.
I tried to install libstdc++.so.5 by following command:
But it says:
I tried giving link to newly installed libstdc++.so.5's link as well.
I have gcc-3.3 installed in my system.
Today I have installed VLC on my Ubuntu Karmic Koala, and when I want to run it I gets this error:
VLC: error while loading shared libraries: libvlccore.so.0: cannot open shared object file: No such file or directory
And I have some Audio problems with my user account how can I solve that one?
I installed novell eDirectory on RHEL 5 and installation was successful. I am getting /ndsconfig: error while loading shared libraries: /opt/novell/lib/libccs2.so: file too short problem when I am giving command ./nds-config new ( for creating a new instance).
View 3 Replies View RelatedI recently setup a new server that serves files over samba and is a subversion repository for a number of projects. I did a simple apt-get update/upgrade for which the system requested a reboot. After I rebooted, I got to the login prompt, at which point I ran into a problem. After I enter my correct credentials, it spits out the following error:
sh: error while loading shared libraries libc.so.6: cannot open shared object file: Error 24
and returns me to the login prompt. Samba and Subversion are both still working, I simply can't login to the server either physically or via SSH.
What steps should I be taking to correct this issue? My thoughts are that I may need to use a Live CD to load the system and perhaps do another update, but before I go through that process I just wanted to check in and see if there might be some other solution.
I have tried googling the issue, and while I have seen other posts regarding shared library issues, there was never anything about not being able to login and I never did find anything specific to the error message I received.
I want to install pgplot on my PC. My Pc is running an intel i7-860. I install Fedora13 (X86_64 version). there is no g77_gcc in fedora13, it has only gfortran_gcc. I have edited the 'g77_gcc.conf' by copying it to'local.conf' and change 'g77' into 'gfortran', and follow all the installation instructions of pgplot. For examle, I did: /usr/local/src/pgplot/makemake /usr/local/src/pgplot linux local.conf.
It seemly go through to the last step correctly, but the last step './pgdemo1' failed. It showes the same error message as other friends showed in 2008 in Fedora10: error while loading shared libraries: libpgplot.so: cannot open shared object file : No such file or directory
In fact it does exists, and if I do 'cp libpgplot.so /usr/local/lib', it showes that the file already exists. I overwrite it, no use at all.Still the same error message. In google I find an item to teach 'how to install pgplot in 'gfortran_gcc', I follow its instructions step by step, but at last, pgplot still does not work. I am an old man, not familiar with computer.
how to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
I have an application consisting of different processes and all these processes are linked to shared libraries. I start the application (spawn all the different processes) as say user1. Now with the application up, if I run a process p1, the process gets activated and works. However, if I start the same process p1 as a different user, say user2, which is completely different from user1 the process complains of
"error while loading shared libraries:...."
I set LD_RUN_PATH both in compile and runtime environment. LD_LIBRARY_PATH is set correctly in both places.
All the above works if I set the absolute path of the required shared libraries in /etc/ld.so.conf file and rebuild the /etc/ld.so.cache
Alright, just loaded a fresh copy of OpenSuSE 11.3 x64, went to update manager and let it update, came back and computer was shut down. After booting it back up, I cannot update any software, nor run any commands.
Here is my output:
Code: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory I've tried searching for this error, some people came back saying to run this:
Code:
But all that happens is this:
Code:
Nor ls work either so I'm stuck and thinking about a reinstall.
I don't understand how this system could be so messed up after a failed update.. Used to trust SuSE, not sure anymore after this incident..
Installed Skype but it wont launch. Running the latest Opensuse Gnome. Ive uninstalled it and reinstalled several times but always with the same error. When I try to run it from terminal I get this:
ig@linux-ljqk:~> skype
skype: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
Ive just now uninstalled skype and tried reinstalling it again via yast, but now I get the following error [PK_TMP_DIR|dir:///var/tmp/TmpDir.xftzR0] Repository already exists.
just installed Ubuntu 10.04 and installed the flightgear package and the fgfs-base package. I ran fgfs from a terminal and got this error:
Code:
$ fgfs
fgfs: error while loading shared libraries: libOpenThreads.so.12: cannot open shared object file: No such file or directory
$
So then I did:
Code:
sudo apt-get install libopenthreads12
and it gave me these errors:
[Code]...
I'm trying to run Kega Fusion on my laptop, which can now FINALLY run Linux (ATI drivers finally work on it), and I can't get the emulator to work..
Code:
brandon@brandon-laptop:~/Desktop/Fusion$ ./Fusion
./Fusion: error while loading shared libraries: libGLU.so.1: cannot open shared object file: No such file or directory
brandon@brandon-laptop:~/Desktop/Fusion$ uname -a
Linux brandon-laptop 2.6.32-24-generic #38-Ubuntu SMP Mon Jul 5 09:20:59 UTC 2010 x86_64 GNU/Linux
brandon@brandon-laptop:~/Desktop/Fusion$
Help? I have the ATI proprietary drivers installed. I tried without them and it still wouldn't work. (And OpenGL is seemingly working as Compiz Fusion is running. I also tried with Compiz disabled but the same error pops up).
I'm running lucid 32-bit. I get this error when I try to run the installer for Unreal Tournament GOTY:
Code:
Verifying archive integrity... All good. Uncompressing Unreal Tournament 436-multilanguage.goty Installer. /home/computer/.setup1548: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory computer@computer-desktop:~/UnrealInstall$ I tried installing libgtk1.2 (as told by some people in other threads), but couldn't do that:
Code:
E: Couldn't find package libgtk1.2
However, I checked that I do have libgtk2.0
So what should I do?
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
Ark said:
Quote:
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
Quote:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
Konsole:
Quote:
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
Quote:
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
I want to run blender in Ubuntu910,but get below
test@ubuntu:~$ blender
blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory
I installed perl v5.8.5 built for i686-linux on my system recently. From that day if I want to run my vi edition I am getting the error as:
Code:
vim: error while loading shared libraries: libperl.so: cannot open shared object file: No such file or directory
I am using:
Code:
[root@station130 CORE]# uname -a
Linux station130 2.6.9-5.EL #1 Wed Jan 5 19:22:18 EST 2005 i686 i686 i386 GNU/Linux
A newbie trying his hand with openldap.Disclosure: I tried posting at openldap forum, but my message does not appear in the mailing list-- and I didn't receive anything back from that forum, so please don't flame.I use red hat 5.5.I didn't want to use the openldap that is bundled with and installed by the red hat, so I downloaded and installed BerkeleyDB-4.8.30 and openldap-2.4.23.
I can see that the file libdb-4.8.so is in /usr/local/lib and /usr/local/lib is in my path (in my .bashrc).. so why not "read" it from there?How do I solve this problem?
Whenever I execute: ssh-keygen -t dsa
I get the following error: ssh-keygen: error while loading shared libraries: libssp.so.0: cannot open shared object file: No such file or directory
I know it used to work, but I'm not sure if that was on Debian, or Ubuntu (before I switched to Debian over a year ago).
Sorry if this is one of those questions with a blatantly obvious answer. I've spent hours searching the Internet for a solution, and trying various things, but to no avail.
I have even tried downloading libssp.so.0 and putting it into /lib/ and /usr/lib/, but the problem still exists. I've also tried reinstalling ssh, openssh-client, openssh-server, gcc, libc6 and several other packages after clearing Aptititudes cache. I'm aware that some of these may have absolutely nothing to do with the problem, but I am getting desperate here. I can also confirm that screaming and making threats to my monitor doesn't seem to help either. I have a screwdriver and a rather large hammer sat here to use as a last resort, but I hope it won't come to that..
I'm running openSUSE 11.0 (X86-64) and just installed skype 2.1.0.47. When starting it, I get skype: error while loading shared libraries: libQtDBus.so.4: wrong ELF class: ELFCLASS64 Where do I get the correct library from? Or which one should I point it to?
View 3 Replies View RelatedI installed octave in my OpenSUSE 11.2 KDE system from Yast. When I launch it with the command "octave" on my shell, this is the message I receive: "octave: error while loading shared libraries: liboctave.so: cannot open shared object file: No such file or directory". What's the problem? Is it a known problem to be solved in the 11.2 RC2 or I have to do something else?
View 9 Replies View RelatedCode:
qtiplot
qtiplot: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory
I'm trying to install Sun Java Web Server 7 on OpenSuse 11.2 (32-bit edition). When I try to launch the setup, I get the following error message: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory I'm guessing that this means I need the rpm for libstdc++.so.5, but I haven't been able to find it.
View 6 Replies View RelatedI am trying to install streamripper (arm) to an nas machine, but arm didn't really required installation, so it was basically a file called streamripper in the directory:/ mnt/sda1/ streamripper the version. I am trying to get it to work is: streamripper_1.63.5-2_arm
But there seems to be an error message that says could find the library, I tried to look for this file, it is in a mad package, but I am not sure which one specifically to choose for and where "exactly" to put under:
Code: sh-3.1# /mnt/sda1/streamripper start/mnt/sda1/ streamripper: error while loading shared libraries: libmad.so.0: cannot open shared object file: No such file or directory the streamripper file is under /mnt/sda1/streamripper