Fedora :: Enable Magic Keys Alt Sysrq Reisub On14?
Jan 22, 2011Being able to use magic keys is critical when video drivers are buggy. How can I enable them on Fedora 14?
View 6 Replies
ADVERTISEMENT
Fedora :: Pressing The Keys REISUB In Sequence Can Shut Down The Machine Safely?
May 26, 2011Fedora has been pretty stable for me but in last days I had a couple freezes on my machine using vlc.
Remembering the trick Alt+PrintScreen and pressing the keys REISUB in sequence can shut down the machine in safely way, I tried thiat but in Fedora 14 doesn't work. The trick has gone?.
Fedora :: Enabled SysRq And Can't Take Screenshots?
Dec 1, 2009I enabled my SysRq key and now can't take screenshots. I have no idea why this happened. I enabled it so that I could have a failsafe way to shut the system down in case of a failure and then this happened.
View 5 Replies View RelatedHardware :: Enable Special Keys On Keyboard For KDE 4.xx ?
Aug 28, 2010I am running Arch Linux with KDE 4.5. I have a Microsoft Wireless Keyboard 3000 v2.0
At the top of the keyboard are 5 extra buttons numbered 1 to 5. These are in addition to the function keys.
I ran xev to determine the keycodes generated by these buttons and nothing results. The keys do nothing in xev. How can I enable these keys to use for desktop switching?
Ubuntu :: Xubuntu 9.10 Freeze After Login REISUB?
Feb 18, 2010Xubuntu 9.10 freezes sometimes after login. Also I Cannot switch to console When it freezes. REISUB & boot again I can do. No freezing has happened inside. Where from to look cause? From syslog I cannot find...
What are these in syslog:
Feb 18 09:22:59 ubuntu avahi-daemon[2430]: WARNING: Failed to contact D-Bus daemon.
Feb 18 09:22:59 ubuntu init: avahi-daemon main process (2430) terminated with status 255
Feb 18 09:23:13 ubuntu rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]
Feb 18 09:23:13 ubuntu init: gdm main process (1127) killed by KILL signal
Feb 18 09:23:13 ubuntu init: gdm main process ended, respawning
Ubuntu :: Is Alt+SysRq+o Shutdown 'clean' With Regard To Disk Buffers?
May 3, 2010I've been having a bad problem with X freezing up (but not the whole system), and I hate continually performing unclean shutdowns with the power button.Will an Alt+SysRq+o shut down the system in a way that doesn't cause the loss of disk buffers? Obviously, whatever hasn't been saved to the buffer will be lost, but my concern extends to the buffers themselves.ext4 and autofsck make this less of an issue, but I hate the thought of unnecessary silent corruption until the freezing stops.
View 6 Replies View RelatedRed Hat / Fedora :: Magic Set Editor - No File Type Associated
May 25, 2009I am having trouble getting a certain program to work. It's called Magic Set Editor and it has a linux version. It seems to install fine, but when I press the link to run the program it always says there is no file type associated with this program. Here is the site to download it: [URL]. I've tried the full and reduced versions, and I tried building it from source, which I have no idea how to do. I am using Fedora 10. Also, I've gone to their linux guy and he tried to help, but has never used Fedora, and so nothing he said worked.
View 5 Replies View RelatedFedora :: Good Cloning / Imaging Software / Program Like Pq Magic?
May 9, 2011Has anyone found a good cloning program like pq magic etc. I looked at clonezilla but could not find a dload for fedora/redhat (would installing it via tarball work?)
View 6 Replies View RelatedRed Hat / Fedora :: Error - X11_request_forwarding: Bad Authentication Data: MIT-MAGIC-COOKIE-1
Dec 21, 2008I am trying to ssh a remote system and redirect X with:
ssh -X remote.system.somewhere
(common user name in local/remote system so no need to set -l uname ) however I receive the following:
x11_request_forwarding: bad authentication data: MIT-MAGIC-COOKIE-1
Red Hat / Fedora :: Wireless Apple Magic Touchpad Not Seen By Gnome Bluetooth?
Jun 9, 2011I am currently running RedHat 6.1 Workstation. The Gnome Bluetooth software does not find my Apple Magic Touchpad. What should I do? I tried scanning by doing "hcitool scan". It did not appear to find it. I am using a USB to Bluestem adapter called D-Link DBT-120.
View 3 Replies View RelatedFedora :: Recompile Squid To Enable - Enable-storeio - Coss
Aug 11, 2010How to recompile squid under fedora 13 to insert this arguments ---> --enable-storeio=diskd,coss
View 2 Replies View RelatedGeneral :: F3 - F5 Keys Incorrectly Behaving As Audio Keys / Remap Them To Original Meaning?
Apr 17, 2010I don't know if this is a configuration issue or a hardware issue, but I have a Kinesis Advantage USB keyboard and for some reason the F3-F5 keys aren't responding as they used to. They don't respond to anything and, when I tried using F5 on Emacs, it said <XF86AudioNext> is undefined, so I guess it's a weird mapping problem.
Any idea how I could remap them to the original meaning?
Ubuntu :: Accessibility Equivalent For Sticky Keys And Mouse Keys?
Jun 27, 2011Just wondering if Ubuntu has an Accessibility equivalent for sticky keys and mouse keys.
View 1 Replies View RelatedUbuntu :: Deluge WebUI Enable / Re-enable Subsequently Unable To Re-enable It (doesn't Appear In The Side Panel Again)?
Feb 10, 2010I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedGeneral :: Re-mapping Non-standard Keys To Modifier Keys?
Apr 7, 2011I'm running Debian (Squeeze) and I have a toshiba portege m700. It has five buttons on the front just under the screen, which are the only ones accessible when you flip the screen over into tablet mode. One of them is for rotating the screen, and another is for switching to external display. I want to remap the remaining three to control, alt and super so that I can use shortcuts with the stylusThe problem is, when I used showkey to find out the key codes, I found out that each button generates more than one key code:Button 1:
key 126 press >> super_r, although this is distinct from the actual super key (125)
key 7 press >> 6
key 7 release
key 126 release
Fedora :: Keys Stuck Sometimes?
Dec 27, 2009Does anyone other then me observe he weird thing with the keyboard, every now and then keyboard behaves as if a key is stuck and - say I'm on console - it keeps printing the same character.I have been seeing this since F12 - alpha
View 10 Replies View RelatedFedora :: How To Map Keys To Get Certain Functions That I'm Used To Working
Sep 7, 2009I just bought an Apple (intl.) keyboard because of its stylish look and weight but I can't figure out how to map keys to get certain functions that I'm used to working.
Particularly Alt+Ctl+F1~6 when wanting to switch to regular terminal and print screen.
Is there a tutorial out there that explains how to map keys?
Fedora :: F12 - KDE Keyboard - Meta Keys
Jun 26, 2010After one of latest update I have problem with meta keys (like shift, ctrl and alt) in KDE. When I press one of this keys, it sometimes stays active after release and deactivates only after I press it again. It's annoying especially while I'm writing some code (php or html) and meta keys randomly stays active after release.
xorg.conf:
Code:
Fedora :: Importing RPM Fusion Keys?
Jan 22, 2011I've searched a number of forum posts and have seen similar issues but the specifics are different and I haven't yet found a solution. I'm running Gnome on Fedora 13 and clicked "Install Updates." About 513 packages were set to be installed, but I get an error midway through:
Quote: The GPG keys listed for the "RPM Fusion for Fedora Rawhide - Free" repository are already installed but they are not correct for this package. Check that the correct key URLs are configured for this repository.
I've tried installing RPM Fusion keys and get an error saying they require "system >=15" (Fedora 15, I'm guessing?) and I don't recall ever adding these keys manually myself. Or if so, I can't recall what I did to get them in there.
I've read that some people can solve this by using a "--nogpgcheck" at the command line, but I don't know what the command line equivalent will be for this update. Ideally, I'd like to continue using the GUI updater since it offers all the info about the packages. So my hope would be to:
1. Identify the problem gpg keys
2. Install the right ones
3. Run the installer again and see everything work.
Fedora Installation :: F10 - Yum - Updates - Repositories - And Keys
Feb 8, 2009I have what I suspect is a frequently encountered problem; indeed it may be an inevitable one. Moreover, I think that I know the solution to the problem. Let me explain.
History:
1. I downloaded f10 from the Fedora site.
2. I burned a DVD.
3. I installed f10 on my laptop using the DVD, and it seems to work correctly.
Symptoms:
4. I ran yum upgrade (as super user), and got the message 'No Packages marked for Update.'
5. I did the same thing for several days and got the same response.
6. I ran yum upgrade a* and got the same response. I thought that the mirror site might balk at large downloads.
Diagnosis:
From what I have read on the web I think the following is what happens.
What I will call the original repository-key system, the one that I downloaded and that is now on my DVD, is limited. It merely concerns the packages that are already on my DVD, and these packages are never changed in the original repository. Therefore, yum is working correctly and will always tell me that 'No Packages marked for Update.'
Cure:
There is a new repository-key system, and with it yum does real updates and upgrades. All I have to do is install the new repository-key system.
THE PROBLEM: ALTHOUGH I HAVE GOOGLED AND SEARCHED A LOT, I CANNOT FIND THE METHOD FOR GETTING AND INSTALLING THE NEW REPOSITORY-KEY SYSTEM IN F10. THERE MUST BE A SIMPLE STANDARDIZED METHOD. WHERE IS IT?
If the above is correct, then anyone who downloads and installs f10 as I did must face this problem.
Fedora Installation :: Missing RPM-GPG_KEY Keys?
Aug 25, 2009I have followed the instructions at installsoftware to configure my system for installs from rpmfusion, and I can now use Add/Remove Software to search for and install kmod-nvidia modules. When I attempt to install kmod-nvidia for my current kernel, I get: "Transaction error GPG key retrieval failed... No such file or directory '/etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-nonfree-fedora-10-i386' (although I do have keys for fedora and livna)
View 3 Replies View RelatedFedora :: Left And Up Arrow Keys Not Working?
Apr 6, 2010I just installed fc12 on a Dell Latitude E6500 laptop. Everything is fine except that my Left and Up arrow keys are inactive so .e.g. I can't review bash history.
In the "keyboard preferences" GUI the keyboard model is "evdev-managed keyboard" (although I have also tried without success the model specific for this laptop) and the only layout is "USA".
Have done an update of all packages without fixing this problem.
Fedora :: Gpg - Exporting Secret Keys Not Allowed ?
Apr 20, 2010I have a problem with export a secret key with Fedora 12.
When i did this command:
Code:
I had an error:
Code:
Fedora Hardware :: Modify Function Keys 'fn'
Nov 11, 2010Fedora 14
xfce
HP Mini 210
I have just bought a HP Min and installed xfce Fedora 14.
However, I would like to modify the way the function keys are pressed. Currently I have to press the 'fn' key down and then press a function key.
The function keys also have a second action. For example, Brightness up and down, volume control, play, fast forward, mute, wifi, etc.
However, those secondary actions only requires a single click.
As I use my HP for doing a lot of programming using emacs. I need the function keys for compiling, book marking, cleaning, uncommenting, etc. Is slows me down having to click on an extra 'fn' key.
I am wondering if it is possible to change the actual function keys to be a single click instead of having to click on the 'fn' all the time. And change the secondary action volumen, brightness, etc, to using the 'fn'?
Fedora Networking :: Copying Authorization Keys?
Dec 12, 2010Using SSH all the time on my home network. I use ssh-keygen and ssh-copy-id to generate and then copy the key file. On one of my computers I've changed the default ssh port and see no way to copy the key without reverting the configuration to port 22 temporarily. This is not a big deal and would probably take less time than it has taken me to type this message.
View 3 Replies View RelatedFedora :: Using Alt + Arrow Keys With Inkscape On 15 (GNOME 3)
Jul 3, 2011I'm using Inkscape on Fedora 15 and when I try to use ALT + [arrow key] to adjust the space between letters, nothing happens. Is that key combination assigned to some other function in GNOME3?
how I might get Alt + [arrow key] to work with Inkscape and Fedora 15
General :: Disable Control Keys In Fedora?
Jan 4, 2010I have a testing application, under which I need to disable Ctrl-x and Few other keys...
My Problem is If i disable Ctrl Key using xmodmap command..All the other Ctrl combination are getting disabled...For ex: Ctrl-s, Ctrl-a etc..My goal is to enable some combination of Ctrl key and disabling some combination of Ctrl key..
Ubuntu / Apple :: Pin To Use Magic Mouse?
May 30, 2010The Bluetooth detects my mouse, but it asks for a "pin" before I can use it. What the heck? I never had to put a pin in to use the mouse on the Mac OS X side. If I can't use my magic mouse, I can't use Kubuntu! I don't have any usb mice around.
View 2 Replies View RelatedUbuntu :: Magic Folder For GNOME?
Sep 10, 2010I really like the Plasmoid called Magic Folder.I looked last year for it for gnome, but there isn't an equivalent. I also searched screenlets, and no luck. Also screenlets seems to have fell out of development... I found out, however, that windows now has the magic folder, and didnt even change the name! Now it is a matter of pride. GNOME MUST HAVE A MAGIC FOLDER!
View 2 Replies View RelatedGeneral :: WOL - Send Magic Packet?
Apr 1, 2011As i am posting in this forum you might already have guessed that I am a total linux noob, but I am a pretty faster learner. I know a few basic things but I feel like I am stuck with my problem.I want to send the Magic packet (wake on LAN) from my linux machine to another, but I am unsure how to approach this. I have google�ed my ass off but I am none the wiser. I found a few forums posts and programs that can do the trick and guides in how to use the programs but I have no idea how to install them.You have to know that my linux machine is a NAS server and has therefore only Konsole access (no GUI). As I said before I am pretty much a noob
View 16 Replies View Related
