OpenSUSE Network :: Create The Virtual Web Site (name Based) Accessible On Http And Https Simultaneously?

Dec 2, 2010

How to create the virtual web site (name based) accessible on http and https simultaneously ?

Example
server have ip address: 192.168.251.22 and virtual IP address=192.168.151.22

Target: create VirtualWebSite(name based) accessible on http and https simultaneously. ?

I can create a virtual site(name based), but he will be accessible ONLY on http or ONLY on https.

View 9 Replies


ADVERTISEMENT

Ubuntu Servers :: Multiple Virtual Hosts, Http And Https?

Sep 15, 2010

What is the best way to go about setting up multiple virtual hosts on the same box, one using http and one using https/ssl? I'd like to serve them from the same ip address if possible; I know it's possible in apache 1.3.

View 2 Replies View Related

Debian Configuration :: Both HTTP And HTTPS On Same Server? (Apache Virtual Hosts)

Oct 30, 2015

How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?

Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.

The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.

View 2 Replies View Related

OpenSUSE Network :: Create A Gateway Server That Allows Virtual Private Network Connections?

Feb 26, 2010

I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.

View 7 Replies View Related

General :: Get Virtual Machine (virtualbox) Accessible On Company Network?

Jul 11, 2011

I created an archlinux vm guest using virtualbox on my windows desktop at work. I'm planning to use it for django development because there are no unix machines available to use as a workstation at work.

From the vm guest I can ping/ssh to other machines in the network, but not the other way around. It's like even though the guest machine has an ip address on the network and a hostname, neither is recognizable.

View 1 Replies View Related

Server :: Portal Accessible Only Via HTTPS?

Jun 20, 2011

I'm installing Liferay as a WAR on Tomcat 6 on a new Ubuntu server.I want my portal accessible only via HTTPS, that's why I've enabled it via Apache.My config :Apache 2 (/etc/apache2/sites-enabled/001-https)

Code:
<VirtualHost my.domain.com:443>
ServerAdmin admin@domain.com

[code]....

View 6 Replies View Related

Ubuntu :: HTTPS Sites Not Accessible On 11.04 With Solution?

Aug 9, 2011

i hav the problem ...n i am having solution for it. ...i searched a lot on forum .but didnt find any proper solution for my problem. problem : " Cannot access some sites on Ubuntu 11.04 specially HTTPS sites. loading of certain sites was really slow" Solution : well. i found no one who could gave me solution that worked. so i studied some linux n here is solution ..ON terminal : sudo pppoeconfthen just follow instructions ...set to default every thing. it will configure all ur net settings on its own.restart ur pc. no need to dial anything. the net will auto dial itself without any problem..just make sure...u do it correctly ..read instructions..

View 5 Replies View Related

Server :: Setup Name-based Virtual Host Using COMCAST 10.1.10.* Network?

Sep 29, 2009

1) My Internet connection is COMCAST with a router box and one public IP address.2) My web server is Apache using 10.1.10.200 as its address.3) Now I want to add another host name (www.myhealth.com) on my server. I did DNS forwardin (with Godaddy) to my COMCAST static IP address.4) I also added (in my httpd.conf) a block for virtual hosting

View 4 Replies View Related

Networking :: SVN Over HTTP Or HTTPS ?

Jul 29, 2011

I'm trying to use svn over http or https because I'm rear of a corporate proxy. Only allows HTTP connections.

I tried connect-tunnel but no success.

I also modified ./subversion/servers and I added the proxy server but no success.

View 2 Replies View Related

Networking :: Https Site Not Opening

Dec 22, 2010

I am trying to open a site named [url] and it gives me error connection refused the network may be down.

I had checked that ip and it's pinging from my pc but the site is not opening

My internet server is red hat linux and i have done all the iptables thing but it's not working

View 5 Replies View Related

General :: HTTPS Works - But HTTP Does Not?

May 9, 2011

I had setup an SSL secure server awhile back, such that: [url] works but [url]does not (note the different: in the first, I use HTTPS, whereas the second I use HTTP) How can I get both to co-exist?

View 7 Replies View Related

Server :: HTTP To HTTPS On The Same Port ?

Mar 22, 2011

I want to ENABLE SSL on a PORT 2222 :

Now this works fine. But I also want the HTTP URL to work and redirect it to HTTPS.

When I visit http://IP:2222 I get :

Quote:

Bad Request

Your browser sent a request that this server could not understand.

Reason: You're speaking plain HTTP to an SSL-enabled server port.

Instead use the HTTPS scheme to access this URL, please.

Hint: [url]

How should I make this request of [url] CT to [url]

View 14 Replies View Related

Server :: Https And Http For One Domain Name ?

Mar 9, 2011

I'm using a box running CentOS 5.5 powered with Apache2. In this machine I hosted several domains and sub domains, managed by Apache's virtual host.

Due to security issue, one sub domain needs to be able to be accessed either using http or https.

My question is: Is it possible to set a sub domain to be able to be reached using both http and https? If it's possible, how to make it happens?

View 4 Replies View Related

Server :: Ssl_error_handshake_failure_alert On Https Site - Localhost

Sep 5, 2010

I am trying to configure local https server but I get this message: "ssl_error_handshake_failure_alert"

I configured my apache and make cert and key files from this article, following section 1B: [url]

I try to add server.crt and ca.crt files in firefox, but it didn't help. I googled and didn't find any information. I try also with 1024bit key.

View 6 Replies View Related

Ubuntu :: Https Works - Http Doesn't ?

Sep 7, 2010

I have my Linux laptop running Katatonic Koala at the moment. It is connected via CAT5 to a switch. The switch then connects to my router. All five of my computers are connected to the switch, actually. The only one that won't talk to any sites other than https secure sites is the Linux box. I am not well-versed in the inner workings of Linux and need some help in what I need to do so that regular http sites work. You guys always have the right anwers so I will wait humbly for your replies.

View 8 Replies View Related

Networking :: Forward All Http/https Requests ?

May 12, 2010

I have a server (Fedora 12) setup at a client's datacenter and the network is setup to allow me ssh access into the server, but prevents me from opening any connections from the server. However, I need to make http and https request from the server. What I'd like to do is forward all http/https traffic through another machine outside the network.

I've been looking at the documentation for ssh and the various options there and have gotten so far as to enable initiating an ssh connection from the client network back to my machine, but am not sure where to take it from there.

Here are some of the commands I've used so far:

Code:

I'm attempting to bind port 80 to be forwarded through the local machine. I assume I use "ssh -R" to create a dynamic tunnel to forward requests but I must be missing something.

By the way, root login via ssh is disabled.

View 5 Replies View Related

Ubuntu Servers :: Https:// Leads To Another Site On My Server

Jul 12, 2010

A while back, I put a site up under a LAMP setup, and followed a guide from ubuntuforums that I googled to set up SSL encryption for the site.

That site works great, but since then, I've added some other sites to the same LAMP server. They load fine as well, but if I type in https:// before going to the latter sites, the browser attempts to redirect to the first, and warns that it is a fraudulent certificate, and that I'm at risk by going to the site.

Obviously, it isn't an attack site, the certificate is just set up for only one domain. How do I prevent my non-SSL sites from redirecting to the SSL-encrypted site?

View 6 Replies View Related

General :: Configure Apache To Use Https Instead Of Http For Some Requests?

Mar 7, 2011

For some of the files that I share using Apache, I want to make sure that they are served ONLY via https.

How can I configure this for Apache?

View 1 Replies View Related

General :: Configure Iptables For Only HTTP And HTTPS Traffic

Aug 11, 2011

I am trying to configure iptables for only HTTP and HTTPS traffic. I start by blocking all traffic, which works, via:

Code:
iptables -F
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT DROP

I then try to allow HTTP and HTTPS on eth0 with these commands, which does not work:

Code:
iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT

Code:
iptables -A INPUT -i eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -o eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT After these commands I should be able to access the internet. Does anyone know why this is not working?

View 4 Replies View Related

Security :: BigBlueButton - From HTTP To HTTPS Reverse Proxy

Sep 17, 2010

I am working on a project to create a video conferencing environment. For this I use a default installation of BigBlueButton on ubuntu 10.04. One of the main problems here is that it's not safe enough to share classified documents trough this software. It's a simple webserver that uses nginx. What I want to do is make this connection secure.

One of the problems is that I don't only have a connection trough port 80 but it uses the following ports:
Port 80 (HTTP), 1935 (RTMP), 9123 (Desktop sharing).
I would like to use a proxy instead of some tunneling or vpn to do this. Would anyone happen to know anything about squid or another equivalent to do this?

View 3 Replies View Related

Ubuntu Servers :: Blocking Https Site With Squid On Webmin ?

Dec 8, 2010

I blocked facebook and ..... but if any one change the http with https its open with him how can i mange https like http.

View 9 Replies View Related

Ubuntu :: Thunderbird Won't Open Http Links In Browser / Only Https

Apr 30, 2010

When I click on an http link in Thunderbird, nothing at all happens. There's no error message on the console, there's no new browser starting, and there's no new tab opening with the browser already running.

I've tried: sudo update-alternatives --config x-www-browser, choosing firefox.I've also tried: adding a new string value to Thunderbird's warranty-voiding config: network.protocol-handler.app.http, with a value of /usr/bin/firefox. This was recommended in various threads.But no luck.There's an entry for https - firefox on the Attachment tab of the preferences, and https links are indeed opening in Firefox. But not http.KDE 4.4.2 itself has default mail client and browser set to Thunderbird 3.0.4 and Firefox 3.6.3 (both from the repositories, no website downloads).

View 3 Replies View Related

Server :: Automatic Rewrites Or Something To Change Http Into Https Requests?

Mar 10, 2011

For one project I use a web hosting service. I wanted the entire site to be https, so I bought a service from them in which they automatically install a trusted cert so people can access the site through https protocol. Since http is still available, though, I need to do automatic rewrites or something to change http into https requests. (I don't have access to their Apache server configuration files or anything like that.)I found on the net this code to add to my .htaccess file:

Code:
RewriteCond %{HTTPS} off
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}

[code]....

View 3 Replies View Related

Software :: Driver - Utility To Mount An Iso Image Over Http / Https?

Apr 15, 2010

Is there a driver or utility to mount an iso image over http or https? There is a httpDisk driver for windows but I can't find anything similar for Linux.

There may be a way of using curl/wget but not sure if this is possible.

View 3 Replies View Related

OpenSUSE Network :: PPPoE - Cannot Access LAN And Internet Simultaneously

Feb 7, 2011

I need to implement at my sister this kind of connection: She is connected on Local area network that has about 50-80 pc's, but for internet access she must start an pppoe connection. For now when she wants to use lan she must put her local address (ps: they dont have dhcp), for pppoe she uses dhcp. Problem is that on that way she can't access lan and internet at the same time. She must disconnect from lan and then start pppoe connection and vice versa. I'm intrested if it is possible to have lan access at the same time as internet access. some kind of tunel through lan up to isp. I was googling little and so PPPoE tunneling. Is it that what I need here?

View 9 Replies View Related

General :: Make Some Files On Machine Accessible Via HTTP Using Apache?

Mar 6, 2011

I did a wget on the source and built the apache binaries correctly. Now what do I need to do to get some documents accessible using HTTP (start some services?)? Also, do I need to group all the files I want to make accessible in some directory and make the directory and its contents accessible or can I just make the individual documents available? I will be providing these links to my colleagues and do not want them to be down, so need to make sure that the apache services are up automatically after a reboot. Does apache have some inbuilt support for this?

View 2 Replies View Related

Fedora Servers :: Apache - Can't Acces Http Remotely But Https Works

Jan 17, 2010

I have 2 web server in my office : http and https. You will find attached the httpd.conf and ssl.conf. I can acces the https server from home, but not the http one.

What I did :
configure the router to forward port 80 to my fedora 11 machine
open port 80 with system-config-network
created a virtualhost

The same exact steps have been done for port 443

I can access both server locally but only the https server remotelly.

Here are my iptables :

Code:

you can try to acces my servers using [url]

I made httpd to listen to port 8080, and done all the port forwarding/opening stuf, and it works. so is it a bug ?

Finally found my error seams like turning off UseCanonicalName to off did the trick

I really think it's a bug now. It was definitively working last week, I just added content to the main host of my website, and now i can't acces it from port 80. If someone think it's not a bug or find someting missing/wrong in my conf file.

View 2 Replies View Related

Ubuntu Networking :: Redirect All Http/https/ftp Traffic Through The Remote Proxy?

Apr 6, 2011

I need to redirect all http/https/ftp traffic through the remote proxy, but when I changes connection settings in browser or in System->Preferences->Network Proxy it doesn't work well: instead of getting page content browser asks for saving some short (8 bytes) file with the same content for all requested pages. It happens in Chrome/Opera/Firefox. This proxy requires authorization and works on computer with Windos XP. It worked well when I was using Windows 7 and Proxifier, now I have Ubuntu 9.10 with all available updates.

View 3 Replies View Related

Software :: Create A Network Logical Volume Based On The Individual HDs And Visible To All Boxes?

Aug 11, 2010

i've been an intermediate-level linux user for some years, and now i'm supposed to set up and manage a small network for our research group. we have 5 linux boxes with ubuntu 10.04 (actually i'm installing everything we need in one box and will attempt to clone the others with clonezilla). i've 2 questions:

1) i'd like to manage all user accounts from one pc (server? so to say), so that every user can log in any of the 5 machines with the same passwd etc. what is the best/easiest/most stable application/protocol to manage this?

2) is it possible to create a network logical volume, based on the individual HDs and visible to all boxes? something like a RAID0 over ethernet?

View 1 Replies View Related

OpenSUSE Network :: XP Pro Share Not Accessible In Explorer

Jun 10, 2010

I have a share accessible from XP. However if I go for lunch and come back when I click on the share in Explorer it says its not accessible. When I click on it again it works. Its like the network card in the Suse server is going to sleep but I cant see any settings for it. I know where they are in XP and wonder if they are somewhere in openSuse? Or if there is some other explanation.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved