Fedora :: Use Yum To Install Pavucontrol?
Jul 18, 2009
1. Use yum to install pavucontrol Go to tab "configuration", choose "off"
2. remove alsa-plugins-pulseaudio, if you installed it before
3. Go to "System->Preference->Startup Applications", deselect the "Volume Control" application from "gnome-media" package, which only uses pulseaudio interface
4. Use yum to install python-alsaaudio pygtk2 gnome-python2-libegg gst-mixer Then add the attached python script to "Startup Applications", which mimics the behavior of volume control but using alsa interface. This is a modified version from its origin: http://david.chalkskeletons.com/files/volume-tray.py which adds a feature of changing icon according to the value of volume.
5. Logout, then login again
View 13 Replies
ADVERTISEMENT
May 16, 2015
if I have to reset my system for any reason or even logging out my pavucontrol resets to my built in audio instead of sticking to my HDMI like I want it to.I can manually configure a file I will, I just need to know where to start.I will provide hardware info when asked for it, just need a feeler here.I am running Debian Jessie KDE 64bit
View 1 Replies
View Related
Nov 19, 2015
I've just installed Debian 8 XFCE and I can't get the sound working properly after a reboot. I mean I can but it keeps resetting to default audio output (analog-stereo) after reboot.
I set it to Digital Stereo in Pavucontrol settings, reboot and here comes analog-stereo again.
I've tried setting digital stereo as default using pactl in the terminal but same problem. When I change settings then relog in my session, sound is working, but when I reboot it reverts back to default output. Strange.
Here's my sound card info :
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
View 1 Replies
View Related
Nov 11, 2010
I had installed pavucontrol in Ubuntu 10.04 to record the sounds being played on the system, by changing the "Record stream for" value to "Monitor of Internal Audio Analog Stereo". I installed pavucontrol in Maverick as well, but here it doesn't capture and show the sounds being played at all, not even in playback (No sound meter bar activity below each entry). The sound can still be decreased/increased and it shows all the devices playing back or recordong. Also if I change the hardware to "Digital duplex" from Analog stereo Duplex" it starts capturing and showing the streams, but then I can't hear anything from the speakers. I even compiled the newest pavucontrol, but still the same.
View 5 Replies
View Related
Feb 10, 2011
So, I've to machines running Ubuntu 10.10. One of them (a htpc) shares its local pulseaudio sinks, and I want the other (a laptop) to direct its audio to it.
So, on the htpc, I've ticked "Enable network access to local sound devices" in paprefs. On the laptop, I've ticked "Make discoverable PulseAudio network sound devices available locally".
The result is that, in padevchooser and pabrowser, the laptop sees the remote sinks. However in pavucontrol they are not visible. If I set one of the remote sinks as default in padevchooser, local applications (tried totem, vlc and spotify) cannot play audio.
View 2 Replies
View Related
Dec 19, 2009
I'm trying to install Fedora 12 i386 using CD#1 for a minimal install. For that during installation I selected only Base. For some reason when I started installation it was trying to install 432 packages (Base has got about 80 or so packages). i can understand there might be some dependencies, but really that much? I kept going with the installation of 432 packages, but it finally failed on gtk2-immodule-xim-2.18.3-19.fc12.i686.rpm.I need just minimal install, so I can install LXDE later on by myself.
View 11 Replies
View Related
Jun 28, 2009
I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
View 1 Replies
View Related
Feb 19, 2011
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
View 5 Replies
View Related
Apr 1, 2011
I am trying to install ndiswrapper in Fedora in order to install a Windows wireless driver.
Code:
su -c 'yum install kmod-ndiswrapper'
, I get this:
Code:
Loaded plugins: langpacks, presto, refresh-packagekit
[Code]...
Rhythmbox crashed and my radio stations disappeared. I'm not sure if this bears any relation.
View 6 Replies
View Related
Jan 16, 2010
I installed fedora 12 Constantine and the install gets to the point of rebooting once it's done with the reboot it goes right in to the login without creating a root account or a user account.How can I solve this issue, there has to be like 3 or 4 solutions to this problem I'm just new to linux.
View 3 Replies
View Related
Dec 10, 2009
I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
View 1 Replies
View Related
Mar 8, 2010
below is what happens when i try to run a install from the command line in virt-install. keep in mind that this is a fresh fedora12 install selinux is disabled logged in as root. i have never had so many problems with something and it is maddening for there to be a thousand freaking how-to's on the subject all acting like it is so freaking simple.
[Code]...
View 3 Replies
View Related
Jan 10, 2011
I now have Fedora 14 64bit up and running.
I need a bit of clarification. I've been using Debian based OSes. I just want to make sure that I understand how to install software using Fedora.
While I had the Live DVD desktop running I downloaded the Google Chrome .rpm pack to the download file, right clicked on the .rpm and opened with the archive manager. The archive manager came up and showed me a file folder, the a popup came up on it's own and ask if I wanted to install, clicked yes and every thing from there worked, Chrome was installed and worked. When I tryied to download the plugin for Google and do the same as before, the install popup didn't come up. This is the part where I made a mistake, I went to the download folder and double clicked on the .rpm and the install popup came up, and I installed. This some how messed up the Live desktop to the point that I had to reboot, shut down didn't even work right.
I should have opened the folder the archive manager placed the .rpm and then double clicked on the .rpm to install instead of within the dowload folder.
I aslo read up on how to use rpm -i filename From the terminal can I Or does the .rpm package have to be in the correct folder before installing?
Also from the live dvd I tried using sudo rpm -i , but got a warning and said I would be reported.
View 14 Replies
View Related
Jun 10, 2011
what is repository's ? do we need to install repository each time we install any package ?or cant we just say yum install package name ? & how to install tar.gz files ?
View 2 Replies
View Related
Nov 18, 2009
Can i install oracle 10g in fedora using the cd i used to install in xp...
View 2 Replies
View Related
Mar 3, 2010
I noticed that for the live cds there was one for GNOME and one for KDE but hte install dvd didnt have an option for one or the other
View 1 Replies
View Related
Oct 22, 2010
This works on an HP DL365 G5, but fails on the DL785 G6Does not even start the install, and I don't get a lot of debug information, so I can't tell what's happening.
$ sudo virt-install
> --vnc
> --arch=i686
[code]....
View 1 Replies
View Related
Sep 13, 2010
My laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies
View Related
Jun 3, 2011
This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies
View Related
Sep 23, 2009
i am justin i'm 17 years old and new with linux, i use ubuntu and linux mint 7 and a friends of my has a dedicated fedora server. he asked me to intall a desktop manager ( or something that is the same, dont know how to call it ) so he could use remote desktop to acces his server
i have connected the server trought ssh and i am in the terminal. Now i want to install kde or gnome so i and my friend could use the server as a mail en WWW bla bla bla server. and my question is how i need to do that i tryd : yum groupinstall "KDE (K Desktop Environment)" and yum groupinstall "X Window System" but none works i have seen those commands on this forum so i tryd it.
View 14 Replies
View Related
Sep 28, 2009
I have a Western Digital Pasport 320 GB hard drive. I wanted to create a live installation on it like a USB stick. I wanted it to serve as a portable OS that I could use to boot any other computer off of, and use it for diagnostics and anti-virus scanning on Windows based computers. The additional space is for my own personal use, kind of like having a mobile desktop where I have all of my documents in one place.What I need to know is how to set up Fedora 11 so that the hard drive will boot on most PCs regardless of their architecture. I also need to know what's a good Anti-virus to install onto it for the sake of fixing Windows hard drives.
Please keep in mind I'm a noob when it comes down to a lot of things, so if there's an antivirus I have to install manually, please included a step by step.
View 1 Replies
View Related
Feb 20, 2010
Recently installed F12 through the text based install and have got to GNOME gui but when i got to system/administration i only get two options and those are for display changes. Is there some way to install the features i missed out on? namely Add/remove programs which i can't seem to find anywhere
View 3 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Jan 31, 2009
Originally I had Ubuntu running on my machine. I installed windows beta 7 with a working dual boot. Get everything working in grub again. I decided to give Fedora a try and wiped my Ubuntu partition and installed Fedora. Everythings all good...except the reconfiguration of grub has left out my Windows 7 partition (nothing out of the norm) I tried manually adding windows 7 to /boot/grub/menu.lst but it's not working, when I try to boot into Windows 7 i get a little flashing "_" for a really long time and nothing happens.
View 2 Replies
View Related
Feb 14, 2009
I am an inexperienced Linux user, I have tried Knoppix and Ubuntu in the past. Since we use Fedora servers at work I have wanted to try Fedora for some time and I tried running it in a virtual machine.My virtual machine is Sun VirtualBox and my OS is Vista Ultimate. Everything worked well until it was time to decide where Fedora is to be installed.Alright, screenshot time yet? This is where I hit the wall, the screen where you select installation drive/partition. The field is greyed out as you can see.
I have prepared a partition, at first I formatted it in FAT32 but because I didn't see it in the installation screen I just re-formatted it in NTFS.Installing with virtual machine should be working? Why is the field grey? What to do? Is it because I have mounted the dowloaded disc image instead of burning it?
I have a 64-bit architecture AMD processor with 2GB RAM and have tried Ubuntu 64-bit in the past, is there a 64-bit version of Fedora and would that be better or worse for me than 32-bit version?
View 3 Replies
View Related
May 22, 2009
I'm planning to install Fedora 11 Release Candidate on my computer because I really need a working Linux system, right now. Once the final version is released, will I have to do a fresh install or do I just update the packages on my system to get the final version?
View 1 Replies
View Related
Jul 28, 2009
I tried a number of times to install dual boot with Win2k. I keep getting errors at the stage of setting up the partition for the install. When I try to choose ext4 it says Fedora cannot be installed on a bootable drive, fix the problem. I don't see how to fix it...it does not say what to do or change.
I have had other linux installed in the same partition without a problem. What gives?
150GB drive for both OS's Separate drive for data, not involved in the install.
| 72GB NTFS Win2K | 76 GB free for ext3 and swap |
LBA support on in Bios.
View 14 Replies
View Related
Oct 17, 2009
I've recent begun to want to create a spin of Fedora for my high school to offer as an alternative to Mac OS X and Windows. My first attempt with any distro was to try and use Suse Studio, however nothing with packages that I downloaded myself would successfully compile. I then thought that I might try and use some sort of local program do create it with and tried Revisor, however when I made Live Media, Xorg wouldn't start and when I made DVD Install Media the kernel would kernel panic every time on boot.
Is there anyway to solve the problem with Revisor or are there any alternatives?
I have also tried using Ubuntu with the Ubuntu Customization Kit however that didn't work either considering I have to have it in a virtual machine.
View 1 Replies
View Related
Sep 9, 2011
Im taking the class now in college once a week. My professor said that we need to install any Linux operating systems so I chose Fedora, but he said we need at least 16GB free of space to install it in our computer, sadly i only have 1GB space left remaining. I told him about it and he told me about installing Fedora in my flash drive that has space of 16GB. I really am interested in this course and want to understand all of this stuff so can anyone tell me the process to install Fedora into flash drive so I can boot it anywhere else other than home? Also since he said I need 16GB to install it don't I got to buy 32GB flash drive at least?
View 2 Replies
View Related
Jan 29, 2009
I have a laptop with a grub loader with both vista and ubuntu in it. Is it possible to install from the livecd Fedora 10 next to these systems? And if so, what do I select in the partitioning section of the installation?
View 4 Replies
View Related
