when I try to view my root directory of my website.if I go to URL... on my computer, it always loads the "It Works!" page. I deleted the original index.html page, and even replaced it - but if I go to URL... it KEEPS coming up.If I specify the page I want to view, ie.URl... it loads the right file.Is there a setting in the conf file that Im missing?
View 3 RepliesOn my Server I have an application running. I have the External IP address of the Server registered in DNS so users requiring access from outside the office can enter a full URL rather then an IP address.
How to I change my Apache config so that all traffic that comes into the server from the URL is put over https?
Since I upgraded to 11.04 on my Server edition I have been experiencing some problems with my FTP-server and Apache. Apache just says that the page is "forbidden" if I'm not logged in on the server, which means I need to go to the server and physically log in or I can do it trough ssh but then when I close my ssh client on my work computer the page is "forbidden" again. And I cant seem to reach the FTP-server from an external address so I need to be in the network to access it.
It says something like:
Code:
An error occurred opening that folder on the FTP Server. Make sure you have permission to access that folder.
200 Switching to ASCII mode.
227 Entering Passive Mode (192,168,0,194,233,166)
I have an apache server and /var/www/html/index.html startpage working fine. But I want to have files accessed by apache in my /home/beny/ director.
View 8 Replies View Relatedthe codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?
View 4 Replies View Relatedbut ive two problems. 1st: The first is how do i change the default page on load up of localhost.eg when i enter the http://localhost/ i get the usual it works symbol.this is because its loading the index.html file in my var/www/ folder.i dont want too create another index file, but how do i change the configuration too load up a different one like home.html2nd: i tried installing sudo apt-get install phpmyadmin and for the most part it worked.but nothign comes up when i go to http://localhost/phpmyadmin/
View 2 Replies View RelatedI am using following software on my web server:
RedHat 2.6.18-92.1.10.el5
Apache/2.2.3
Coldfusion 8
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart
no issues
I shut down firewall and tried again, but got the same "page load error".
I have apache installed and I have it all setup so that when I create a user, in their home directory i created a folder called public_html and then that user can upload web content. Users then can browse to their site by going to[URL],,.How can I get apache to show a different or default page if the user does not have a index.html file in their public_html folder. Cause if they dont, you get a 401 saying you dont have permissions to view, etc. So id like apache to default to something else if the user doesnt have a index.html.
View 1 Replies View RelatedToday, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies View RelatedI have a server that host's several sites, recently I had to create a new server because the old one isn't good enough for me. Ive installed apache2 on the new server and moved all the files from one server to the other. I'm making tests in my local lan so I've edited my computer's hosts file to point to the name of each site to the local ip of the new server:
192.168.1.85 www.mypage.com
192.168.1.85 svn.mypage.com
192.168.1.85 trac.mypage.com
I have all the site definition files in /etc/apache2/sites-available I also have the used a2ensite to enable each page.
Whenever o use my browser to try and access each of the sites I always get the svn.mypage.com page and none of the others.
here is some debug info:
Code:
sudo apache2ctl -S
VirtualHost configuration:
wildcard NameVirtualHosts and _default_ servers:
[Code]....
But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.
View 3 Replies View RelatedI know what I need to do I just cant seem to achieve it and that is correctly setup a DNS server that works over the internet, I'm using BIND9 with webmin. I have Fedora 14 - Apache is install its all working locally, so this final step I just can't grasp to be honest.
View 14 Replies View RelatedI have 2 web server in my office : http and https. You will find attached the httpd.conf and ssl.conf. I can acces the https server from home, but not the http one.
What I did :
configure the router to forward port 80 to my fedora 11 machine
open port 80 with system-config-network
created a virtualhost
The same exact steps have been done for port 443
I can access both server locally but only the https server remotelly.
Here are my iptables :
Code:
you can try to acces my servers using [url]
I made httpd to listen to port 8080, and done all the port forwarding/opening stuf, and it works. so is it a bug ?
Finally found my error seams like turning off UseCanonicalName to off did the trick
I really think it's a bug now. It was definitively working last week, I just added content to the main host of my website, and now i can't acces it from port 80. If someone think it's not a bug or find someting missing/wrong in my conf file.
I am struggling with some issues Apache-tomcat is running fine, and port:8080 is also LISTEN but when am tiring to access the tomcat web_page is not up ,why ?
View 2 Replies View Relatedhow Apache + Ubuntu + Cloud computing works together.Right now, I have [url].... set up to go from my DNS to the cloud server. httpd.conf currently looks like this:
Code:
NameVirtualHost 173.203.100.72:80
<VirtualHost *:80>[code]...
But when you go to 'elliesdev.com' it shows you the EHCP page. I have followed this thread to uninstall EHCP as well as deleting the index.php and its image files from /var/www but I still see the "default web site page" by EHCP. So I'm pretty sure its something with Apache that is causing the site to display that page? What should I do to get ride of it the EHCP default page?I also have a magento ecommerce running at elliesdev.com/magento and I would like to have Apache display it as the default page that you see when you go to elliesdev.com. I have tried changing the DocumentRoot in Apache to /var/www/magento but it makes magento display wrong. How do I make Apache referre to /var/ww/magento as the default for elliesdev.com without displaying wrong?Also, when you go to elliesdev.com/magento, the URL will turn into IP-ADDRESS/magento. How do you make Apache keep my domain name in the URL and not change it to my IP address?I have a feeling that what I am doing is correct, but there is some config file from EHCP that I have not deleted yet that is causing all of this.
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View RelatedThis web page....the Java works fine...the sound does not work. I am using Ubuntu !0.10...it worked in 10.04 but not now. [url]
View 9 Replies View RelatedTonight I bought an HP LaserJet 1020 on Craigslist. Installed it and printed a test page without any trouble. But when I try printing a multi-page document, it only prints the first page, and then I get a message saying it may be disconnected. It's not, but I waited a loooooong time and the successive pages didn't spit out.
View 9 Replies View RelatedI am trying to set up a web page for the business and we have had the website or domain for a while but no one has put anything on it. I have never done anything like this before so i typed in the website and got the apache test page saying that i should add this: /var/www/html/
1) i'm not really sure what to add it to
2) i've tried adding it to the website url and that comes up with invalid page
3) could someone please explain in simple terms how i can get on to the webpage so i can start adding content to it?
I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies View RelatedI am getting this error whenever I access the page:
Code:
PHP Warning: fgets(): supplied argument is not a valid stream resource
Any idea whats all about?
I explored and found it permission issue.
I want to put a user call paul in apache group.Any idea how can I do that?
I not a total noob to linux only a noob to apache.I am Running A lamp server on A VPS with myhosting.com. but try as i might i cant apache2 to load the right page. I have set document root to /slk/redretriever/ but when i load the page it still loads /var/www/vhosts/default/htdocs/.I cant figure out why please help.
View 5 Replies View RelatedI have created a php page with only
PHP Code:
<? php echo "OK"; ?>
in the code. When I go to that page in a browser, I get a blank page. Is that normal, or am I suppose to see the word "OK" displayed in a browser? When I became curious, I open up Wireshark to capture the packets, I see that my server is giving out a "HTTP/1.0 500 Internal Server Error".
Here's the entire tcp stream:
Code:
GET /services/test.php HTTP/1.1
Host: 192.168.1.5
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 .....
I run Linux RedHat and want to find out how can I replace the standard Apache 503 error page with my own? This is my configuration in the httpd.conf file for error pages. Can I just edit the HTTP_SERVICE_UNAVAILABLE.html.var in /var/www/error directory and replace the content with my own , or how can I accomplish my goal?
View 3 Replies View RelatedWhen I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.
View 11 Replies View RelatedI've configured in apache on linux to display custome error page for error 403.i just entered the following line in httpd.conf file ErrorDocument 403 /path/for/html/file...Here we are using Https.Any idea how to configure it so that the custom error page is displayed my .html file?
View 7 Replies View RelatedI have installed the CentOS 5.3 on VMWare. Then I Have Installed Apache ,PHP , Mysql with the flowing Command :
yum install httpd
yum install php
yum install mysql
yum install mysql-server
yum install mysql-devel
yum install php-mysql
Then I tested my Web Server , Data Base server and PHP Whit Create A PHP Page that work to Mysql this Test is successfully. Next I ping my machine IP (192.168.6.131) and then Ping windows xp machine. Even I Ping My Linux machine in Windows XP. But when check the PHP Page Or Local host in Linux machine whit Browser (IE or FF in XP), Response (IE:) Cannot display the webpage or (FF:) The connection was reset.
i have installed fedora 11..when iam opening my apache default test page using
http://localhost its opening but when iam trying to open the same using my ip address i.e. http://172.31.73.4 its not opening..instead iam gettin an error message like this in firefox
ERROR
The requested URL could not be retrieved....While trying to retrieve the URL: http://172.31.73.4/can anyone tell me whats the problem because till now i was using fedora 8 and while using apache i never got this sort of problem..
I have a domain, dns hosted, and apache serving up pages. this all works fine, so far. i even have a cms running. my confusion starts when i try to host a different site under a subdomain, ie. sub.mydomain.com.i have two vhosts in apache. one is mydomain.com and the directory is /var/www/mydomain.but, when i try to add another vhost like webmail.mydomain.com, and i try to put the root directory in /var/www/webmail, it doesn't work. when i try to access webmail.mydomain.com, i just get the site on mydomain.com.I feel like i am just missing something really simple here, but i have tried searching around for solutions to no avail.
View 4 Replies View Relatedquesiton is how I can redirect http://www.thispage.com to http://my.page.com and still retail displaying http://www.thispage.com.The issue is if I point in httpd.conf to directory where my.page.com it doesnt work because it knows it address.
View 4 Replies View Related