I've been using curl in a script of mine for a while on Ubuntu 9.10, without problems.
Ubuntu 9.10 got the following curl installed through apt-get:
ii curl 7.19.5-1ubuntu2 Get a file from an HTTP, HTTPS or FTP server
[code]....
I recently moved from Ubuntu Desktop to Ubuntu Server. I have a Dell D600 acting as a three prong firewall. I use a Netgear FA120 USB NIC for the third prong. After converting to Server, the NIC detects as Eth1. I'm able to configure an IP, but the NIC never sends or receives packets. The same NIC works great in Ubuntu Desktop. Dmesg never shows the NIC being ready.
View 3 Replies View Relatedthe codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?
View 4 Replies View RelatedIs there any curl API to configure only the required protocol. If I have proper openssl installed, the installed curl will have all the protocols (like HTTP, HTTPS, FTP, File etc...) supported by default. Is there any way to allow or disallow only some of the protocol at the runtime. Say I need to support only HTTPS, FILE and I dont want to allow HTTP. Is there any way to do this?
View 1 Replies View RelatedI'm trying to run apache2 with mod_ssl and php support and I need curl too. When php5-curl is installed apache doesn't work with ssl and I've got this one in error.log:
Code:
[Thu Jun 03 10:00:39 2010] [notice] child pid 26013 exit signal Segmentation fault (11)
[Thu Jun 03 10:00:39 2010] [notice] child pid 26014 exit signal Segmentation fault (11)
It's strange because it works well without ssl. The problem occures only when I'm trying to access and SSl page, doesn't matter if it's a html page or php file. I'm using Ubuntu 10.06 Desktop version which is x64. Below are the packages which I've got installed related to apache php and curl. I successfully compiled php5 from source, but the problem still exists so probably it's somewhere in apache?
I need to downgrade curl (newest version has a bug I can't get around) and I'm not exactly sure how. I have removed curl (sudo apt-get remove php-curl), and downloaded and installed (./configure, make, make install) the version I need and everything looks fine for that. However, my phpinfo page doesn't show curl support anymore, so I assume I need to recompile php with curl support. My question is, how do I recompile php with all the current settings it has now? I used apt-get to install it with a bunch of other packages, so I'm not really sure what arguments to use when I recompile it. Is there a way to print the current settings?
View 7 Replies View Relatedi'm trying to write a bash script to upload an image to [URL], but i can't get i working properly. Everytime i try, the html returns me a error saying "Upload is disabled during short maintenance work (ETA 10 minutes). Brb!", while from the browser everything works fine. This is my current command line:
Code: curl -L -b cookie-pix.txt -c newcookie.txt www.pixhost.org/cover-upload -A "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" -F 0=@/home/admin/Desktop/karm.jpg -F content_type=0 -F press=Upload And this is the html of the form:
[Code]....
I just installed Apache2 for the first time, on Mint 10 (Ubuntu 10.10) and put PHProxy in /var/www/x
The php page works fine if I access it via www.domain.com/x, and it works both with and without the www when I access it via https.
But if I go to just http://domain.com/x, then it tries to download the php file.
My ISP provided me with a static IP and I went and bought a domain name with godaddy.com. The issue I'm having now is that I am getting a 403 forbidden error (You don't have permission to access / on this server). The strange part is that when I ssh into my server, and try to go to my website, everything works fine
View 5 Replies View RelatedI'm trying to setup a server at home so i can work in a LAMP based web app from a Windows 7 laptop. I downloaded Ubuntu Server 9.10 and installed it on one of my desktop PCs. I also installed phpmyadmin and everything seemed fine (tested with lynx) I started noticing the problem when I tried to connect from the laptop to the server in the same LAN. when i tried to access [URL] the browser kept loading forever and nothing appeared. The default [URL] it works" page display just fine I then created a testing.php file containing just <?php phpinfo() ?> in the /var/www directory and it works on the server, but from the laptop it displays the same hanging behaviour, any php code doesnt seem to be properly executed when apache serves other machines.Im guessing its some sort of php configuration causing this, and it might be obvious for ppl with more experience with server setups, but i've never setup a server before and Im having a hard time solving this.
View 1 Replies View RelatedI would like to accomplish: 1. Users to have access to their own Share on the server, no one exept the user shall be able to browse, read/write. (sould the user directories be in /home/<username> folder or shall one use another structure?
2. There shall be a public are where all users can browse, read and write. no guests, only users who have accounts!
3. A GroupShare. Users who are members of group Staff many browse, read/write.
4. Add some directorys for private use (to see how it works)
So would this be correct: Create the Directory Structure on the server:
Code:
# mkdir /usr/smbroot
# mkdir /usr/smbroot/users
# mkdir /usr/smbroot/public
# mkdir /usr/smbroot/groups/staff
# mkdir /usr/smbroot/private/fredrik_extended
or shall one use the default user shares /usr/<username>/?
[Code]...
I have recently bought a new laptop for this purpose. It is a Toshiba L555D-103. It was pre installed with Windows 7 (64 bit). I have now installed Ubuntu 9.10 (32 bit). It works perfectly when wired. But it does not when I try it wireless. It did work wirelessly with Windows 7, and I have many more both stationary and laptops working through the router, so I do not think the router is the problem.I am guessing that there are no drivers for the wireless to function, but I am not sure. I am guessing that there are no drivers for the Ethernet card ?
View 9 Replies View Relatedmy network was a dream to set up under ubuntu 9.10. all i had to do was enter pass key, then that was it. Works brilliantly.
Different matter with studio. The thing I notice in network connections is, it doesn't want to retain my pass phrase, if I go back into properties the phrase is blank. As far as I can tell the wireless card has been reconcognized and is communicating with router.
My system is: asus p5ql-vm epu, intel core2 duo 2.8 e7400, 4gb 1067 ddr2 ram, belkin f5d7050 v4000, edimax router.
Here is the info requested in the sticky:
kevin@ubuntu:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 003: ID 045e:00dd Microsoft Corp.
Bus 008 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
code....
I am using Ubuntu 9.10. My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
lspci -v
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: Gateway 2000 Device 0562
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f3010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
[Code]...
I've got 9.04 and 9.10 both installed on the same machine. The /home directory is on a separate partition, so both OSes use the same /home.I can't get Compiz to work at all in 9.10, even though it's been perfectly fine in 9.04. Is there a backport of some sort that i should install?The fixes I've found all point to editing the xorg.conf file, but of course, Karmic doesn't have an xorg.conf file.I've tried reinstalling the Compiz files, reinstalled the open-source video drivers, installed/uninstalled fglrx drivers a few times, rebooted dozens of times.
View 8 Replies View RelatedToday I tried using PuTTY to set up a socks proxy on my local machine, a procedure I used to do when I was not using Ubuntu which used to work flawlessly and out of the box... however, apparently putty is not able to set up a port on my PC, but if I use ssh -Dport, everything works smoothly. Again, this used to work out of the box on other distros... any hints?
P.S.: This is the third problem I'm having with standard operations in Ubuntu: pinentry-qt4 does not work, the scanner needs manual setting to permissions, now this... isn't this distribution supposed to be user friendly? I'm resorting to the terminal more than I ever did.
I am having an issue with my server I have setup. I have apache running and can access the files via all other computers on my network via the ip address i have it set to default to the /var/www folder with index.html as the main file. I am however having issues trying to access it from my other IP the one i found at what is my ip. I have even setup a no-ip address to it. I've forwarded port 20 and port 80 i've even given it the default dmz. I disabled the firewall on my router and I checked and my Ubuntu machine doesn't have a firewall whatsoever i can access my outside ip on the local machine and have access the problem i'm having is trying to access it from anywhere but home. [URL]
View 9 Replies View Relatedwhen I try to view my root directory of my website.if I go to URL... on my computer, it always loads the "It Works!" page. I deleted the original index.html page, and even replaced it - but if I go to URL... it KEEPS coming up.If I specify the page I want to view, ie.URl... it loads the right file.Is there a setting in the conf file that Im missing?
View 3 Replies View RelatedI'm having an issue with a BIND server. After a restart, (or randomly, I assume whenever a cache expires,) when I try to resolve any domain I get a "Host yahoo.com not found: 2(SERVFAIL)" Eventually it starts working and works fine till the cache expires again;
[Code]...
I'm following how to instruction by [url] I cannot get sites working.
View 7 Replies View RelatedI've recently installed KDE 4.4.1 just to try on a Dell 1545 laptop with Ubuntu 9.10 previously installed.
My problem is that the wireless connection works just perfectly with nm-applet under Gnome, but when I login on KDE and ask KNetworkManager to connect to the same network as before, it can't finish the connection.
When I choose the connection the program asks for my passphrase, I type it and then it just sticks on "activating network" and nothing happens.
My experience with KDE is zero, so I don't even know where to start looking. I'd even tried to kill KNetworkManager and try to replace it with nm-applet, but I think there's a daemon that restarts it immediately.
Ive been having some troubles with wireless. Ethernet works but wirless (at first) doesn't work. However, when i plug the ethernet in, all the wireless networks it detects are populated and i can then connect until i shutdown my computer.My disable internet button on my computer also doesn't seem to work well. It is always blue, and when i press it and have internet connection estabsliehd, it erratically turns from blue to orange to blue and then stays on blue.
When i have shutdown and booted up and i haven't placed ethernet in (so wireless doesn't work) it wont even change color.Any solutions? I dont know what info to include so just let me know and when the wireless does it work, it is slow in opening a new tab and connecting to google.
The gshutdown program works perfectly on my Jaunty computer but will not work at all on my Lucid computer. Why is that ?
View 2 Replies View RelatedThis web page....the Java works fine...the sound does not work. I am using Ubuntu !0.10...it worked in 10.04 but not now. [url]
View 9 Replies View RelatedWorks fine when I have the laptop plugged into the mains and will happily switch from 3.5mm to speakers and back again.
But for some reason, when the laptop is on battery I don't get any sound and all, from the 3.5mm or the speakers.
Samsung Q430 laptop
Ubuntu 10.10 x64 (fully up-to-date)
Per the HowTo post a Wireless Issue Sticky, I have included the information in the 10 steps below.Here is the description of my problem: I am getting back into Linux after purchasing a new PC (have not owned one personally for several months). I purchased an HP, as I've had personal success with them. It is an HP Pavilion g4 Notebook.When I booted the Live CD, I was pleased that wireless just worked.However, after installing, wireless does not work.The Additional Drivers Tool appears to recognize my wireless card;however, when I attempt to active the driver, I receive an "installation failed" dialog.ere are two screenshots:And here are the results of the file from the second screenshot:
Code:
2011-06-12 11:04:58,837 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[code].....
I am running a website using a Fedora 9/ Apache 2 platform. I have added two new disks to the same server and installed Fedora 12 (I don't have both sets of disks in at the same time either the old ones with F9 or the new ones with F12). Having copied 'all' of the settings over to the new F12 installation it only serves pages on localhost not on the external IP as the F9 version does.
I have now installed F9 (got rid of F12) onto the new disks and copied the settings from the old installation onto the new disks and the server once again serves up pages. The only hardware changes are the disks being popped in and out between restarts as I swap between the old and new installations.
Hopefully there is some obvious (to someone) difference between F12 and F9 that would account for this.I have messed with settings for a while now and am almost at the point of paying for RHEL to see if that does the job.
When I ping a destination IP address, it responds. However, when I try to telnet or ftp or sftp to the same IP address, it does not connect.
I do not know the physical location of the machine.
I am using a acer laptop with ubuntu 10.04
View 2 Replies View RelatedEverything works except on Fedora port 110 cannot be opened no matter how hard we try, we run REH (Redhat Linux) on a colocated server, now we run Fedora in a cloud
View 6 Replies View Related