Fedora Servers :: F13 - LDAP Multiple Direct Map In AutoFS
Sep 18, 2010
I am using LDAP to manage the autofs and everything works fine. I have a situation here that I can't figure out how to do. I need to use 2 direct map in auto.master, but the LDAP service doesn't allow me to add 2 "cn: /-" entries in the directory.
The following is my auto.master map:
dn: ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc= com,dc=my
objectClass: automountMap
objectClass: top
ou: auto.master
dn: cn=/-,ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc =com,dc=my
objectClass: automount
objectClass: top
automountInformation: ldap://ldap.example.com.my/ou=auto.iso.indirect,ou=autofs,ou=dolphin,dc=examp le,dc=com,dc=my
cn: /-
I have another ldap entry auto.data.indirect but I have no idea how to inject it into the directory. Any ideas how to implement it? I am using Fedora 13.
View 3 Replies
ADVERTISEMENT
Apr 5, 2010
i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
View 11 Replies
View Related
Jun 25, 2011
how to make autofa5 work [with NFS4] using [in]direct mapping but no joy so far. Firsty, this the "/etc/exports" on my NFS4 server (CentOS 5.6):
Code:
/media/exPort htpc(ro,sync,no_subtree_check,no_root_squash,fsid=0)
/media/exPort/mMusic htpc(ro,sync,no_subtree_check,no_root_squash)
and this what I have in there:
Code:
[root@serv03 /]# ls -l /media/exPort/mMusic
total 16
drwxrwxr-x 11 databank lhome 4096 Jun 23 21:25 iTunes
drwxrwxr-x 3 databank lhome 4096 Aug 19 2010 Network Trash Folder
drwxrwxr-x 3 databank lhome 4096 Aug 13 2010 Streaming Radio
[code]....
But it doesn't work - neither it throws any errors in, nor does it mount the share. All I need is to mount "/mMusic" (i.e. /media/exPort/mMusic) as "serv03:/media/nMedia/mMusic" so that tree looks like this:
Code:
.
|-- media
| |-- nMedia
| | |-- mMusic
[code]....
View 2 Replies
View Related
Mar 20, 2009
How to configure ldap technology in fedora & linux.
View 3 Replies
View Related
May 29, 2009
I'm new LDAP kind of stuff.I want to configure LDAP server and Client on windowsXP. could you tell me which Open source LDAP Server and client are best fit for windowsXP. Is OpenLdap not suitable for windows?
View 8 Replies
View Related
Jun 19, 2009
I just configured my first Directory Server. I was looking to use PHPLDAPADMIN to start administrating it. Any good how to's or Tut's?
View 4 Replies
View Related
Aug 29, 2011
Please let me know how to delete/flush complete LDAP database ? I tried deleting all files from /var/openl dap- data. but still top level data base attributes remains.initially I had set shadowExpire,shadowFlag etc, I want to remove all these.Kindly help me to build my new database.
View 5 Replies
View Related
Sep 5, 2011
how can i access 'description' attribute stored in LDAP server from LDAP client(pam_ldap,nss_ldap).
View 2 Replies
View Related
Sep 7, 2011
I am trying to configure and compile the pam_ldap and nss_ldap for MIPS architecture. for this they need ldap library. so I am trying to compile openldap code for MIPS first, but the configuration is failing.The command and options used for configuration is as follows.
./configure --host=mips CC=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-gcc LD=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-ld CFLAGS="-g -O2 -I/usr/include -I/usr/include/openssl" LDFLAGS="-L/usr/lib" --prefix=/mips/ldap --with-yielding_select=no
[code]...
View 1 Replies
View Related
Sep 2, 2011
I have a openldap server running on one machine (fedora10) and pam_ldap.so and nss_ldap.so running on the other machine.
I have added a new user to the LDAP server database, this user is not created on client machine.
1. Can i login to the client machine using this new user?
2. Now if i try logging with this new user I am getting error messages, the error messages are as follows at client side
Sep 2 10:34:36 localhost sshd[8484]: Invalid user kim from 10.254.194.148
Sep 2 10:34:36 localhost sshd[8485]: input_userauth_request: invalid user kim
Sep 2 10:35:16 localhost sshd[8484]: pam_ldap: error trying to bind as user "cn=min soo,ou=people,dc=samsung,dc=com" (Invalid credentials)
[Code]....
View 4 Replies
View Related
May 21, 2010
I've setup an openldap server, and am trying to add .ldif files to the database.
I am constantly getting the following error, no matter what I do:
View 18 Replies
View Related
Jan 28, 2011
If there is a way in autofs5 to search for a key in multiple OU's? I am migrating our existing NIS infrastructure to LDAP. Over the years the NIS environment has evolved (not necessarily for the better). I have a back end database and each NIS master extracts specific elements from the DB to create the NIS maps.
On my Linux servers I use a program map that prgramatically searches multiple NIS maps. On Solaris I have an auto.home file that will search auto_home and auto_service ( Home has all home directories associated with people (i.e., in the passwd file) auto_service contain directories that are accessed as /home/.... but are not tied to a user account.
I also have regional data and unfortunately, my back end storage is not consistant so /apps/perl in one region will resolve to regionA:/path1/path2/perl and in another region it may resolve to regionB:/path33/path2/perl. Can this be done?
View 4 Replies
View Related
Apr 19, 2011
I want to set up Ubuntu Server as a firewall in which I want to direct my internet connection through where Ubuntu Server will block, filter, and monitor anything that come into either three of my computers using the same internet connection. Is this easy to do? sum up the steps that I will have to go through to establish this, and any relevant information, and where I might be able to find necessary information etc. I plan to use ubuntu-10.04.2-server-i386.
View 3 Replies
View Related
Oct 8, 2009
i just create a nfs server and share a /123 directory , i can successfully mount this share using mount command , but i cant be mount using auto.master (autofs) , how can i mount this share using autofs .
View 1 Replies
View Related
May 5, 2010
I just used command # yum install -y autofs that work complete but now i want to remove this package.How do i remove this.
View 1 Replies
View Related
Feb 18, 2010
There are a couple of way to mount Samba shares, but I prefer using "autofs" which can mount them on the fly. Use the autofs daemon to have shares automatically mounted on demand. The netfs service (installed by default in Fedora) is not a daemon and can only mount shares on boot, (it can't mount them on demand).
* Install the autofs package:
Code:
yum install autofs * Edit /etc/auto.master (the master map file), and comment out all lines (with #). This avoids conflicts with the CDROM (which is handled by Gnome), etc. Save the file. * Create a new file /etc/auto.cifs, with the contents of:
Code:
#!/bin/bash
# $Id$
[Code]...
View 4 Replies
View Related
Oct 21, 2010
I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.
Relevant sssd.conf:
[domain/default]
auth_provider = ldap
cache_credentials = True
View 11 Replies
View Related
Jun 18, 2011
i need to host multiple site under one ip adress, its this posible ?
View 1 Replies
View Related
May 5, 2010
on F12 (2.6.32.11-99.fc12.i686.PAE) autofs/udev generates the following messages at every boot:
Code:
May 5 00:28:30 foo udevd-work[679]: setfilecon /dev/autofs failed: No such file or directory
May 5 00:28:30 foo udevd-work[679]: chmod(/dev/autofs, 020660) failed: No such file or directory
May 5 00:28:55 foo automount[1131]: failed to mount /media/.hal-mtab
The configuration is fairly simple:
Code:
#/etc/auto.master
/media file:/etc/auto.media -browse --timeout=10
#/etc/auto.media
[code]...
View 1 Replies
View Related
Mar 26, 2009
I have eth0 for administration, and vlans eth0.2 eth0.3 and br0 for resource seperation. My esternal interface is ra0.each internal interface is on a seperate subnet, and I have dhcpd giving connecting devices ip addresses out of their assigned network. I want all of the devices to be able to access the internet through NAT, I need to allow them to communicate with port 80 on eth0's subnet
eth0 10.0.0.0/24
eth0.2 10.2.0.0/24
eth0.3 10.3.0.0/24
[code]...
View 2 Replies
View Related
Aug 4, 2010
I have Postfix + Unix Accounts + Virtual Domains. I have a bunch of domains hosted on my machine, let's call them [URL] [URL] and [URL]... etc Until know, domain2.com, domain3.com were mapped in virtual domains to [URL] So this is how /etc/postfix/virtual looks like:
[URL]
Like I said, all mail accounts are unix accounts, so, if for example I have the user "paul" this user will receive e-mail for ALL DOMAINS. [URL]But as it turns out, I now need a COMPLETELY ISOLATED domain... let's call it [URL]. So If I create a new user, let's call it "steve" I want steve to receive e-mail ONLY on [URL] and not on all others.
I would have to redo the whole thing from the beginning. I'd have to comment out the $mydestination parameter in the main.cf file and start using only virtual domains. So if I have the following users: paul, steve, sally, megan, jenny and I want paul and steve to ONLY receive mail for domain1.com, sally and megan to receive mail for domain2.com and jenny to receive mail for domainX.com, my /etc/postfix/virtual file would have to look like this:
[URL]
I'd have to create the unix account and then start modifying the /etc/postfix/virtual file.
View 1 Replies
View Related
Sep 9, 2010
I've got two sound cards fitted, before I've always killed pulseaudio as a pain in the butt.
Without pulseaudio enabled I could run two audio apps simultaneously, ie run a SDR ( software defined radio) app , and listen to music or watch TV at the same time.
However, with puls audio running, you can only run one, either input to either output. So can a second instance of pulseaudio be run, master and slave perhaps ?
View 6 Replies
View Related
Sep 11, 2010
I'm trying to set up awstats for my web server which runs ISPConfig3. Due to ISPConfig, my log-rotated files have the extension .log.gz, and the naming syntax of DATE-access.log.gz.
According to awstats documentation, I need their tool to merge the log files, however, I cannot get it to work. I always get file not found or pipe error like messages.
Code:
I took a look at permissions, log files are world-readable. Checked path's 1000 times, no typo. When I try to find out whats wrong, the problems usually begins when I try to use the * character in the LogFile variable, ..
Anyone got experience with multiple log files and awstats? ...
View 2 Replies
View Related
Oct 18, 2010
I have around 10 Servers.How to see Dmesg and /ver/log/messages of multiple servers from a centralized location
View 5 Replies
View Related
May 8, 2009
I would like to know if I need multiple IPs' to setup two SSL urls on the same Apache server? Two ssl certificates, one IP - is it possible?
View 4 Replies
View Related
Dec 19, 2010
I want to run a server with multiple blog with worpress, is there a tutorial ?
View 2 Replies
View Related
Feb 7, 2011
I need to create a lot of users locally on my server.I have these info:username:GID:UID.How I can make a "for cycle" for make a multiple useradd? (useradd -u UID -g GID -m /home/USERNAME -s /bin/bash USERNAME)I tried to do this:
touch userlist.txt (UID:GID:USERNAME)
100:110:user1
200:210:user2
[code]...
View 6 Replies
View Related
Apr 20, 2011
Can ANYONE point me in the right direction on how to use storage on multiple servers as a single cluster?I thought storage cluster was for that but, after much googling, and even more help from here, I don't think that achieves my goal. My goal is to have multiple servers share a file system, to act as somewhat of a network raid, so if node-A goes down the files are available on other nodes, and hopefully so when the capacity of the nodes are reached I can add nodes to expand the "cluster".
View 6 Replies
View Related
Feb 7, 2011
I'm looking at setting up a couple automated systems: Here are a few examples:
* Internal accounting system to download and process emails
* Public web server to visit
I could put each system on its own separate box -- for example, it's generally good practice to separate anything that external users have access to (such as a webserver) from internal processes such as accounting. Now, rather than dishing out the money for two separate servers, could I get away with just installing new instances of VMWare on the same box for each system?
To give you an idea, these are not large scale computationally sensitive systems. The accounting one is simply downloading and tallying emails, and the latter is just a webserver with maybe 5 hits per day on a good day. I could definitely pick up a new box for say $50, but I wanted to know the general practice of using VMWare on the same box versus two separate boxes.
View 2 Replies
View Related
Jan 17, 2011
Looking for a test tool where I can fire up any number of ports (TCP and / or UDP) to listen on.
I am currently getting my using nc but its only 1 port at a time (i know I can open up multiple sessions but thats cumbersome), it can't do UDP, and it closes at the end of the session.
A friend has suggested socat but it looks pretty much the same except it can do UDP, but also cumbersome, I have to manually output to a different file per port, etc.
Basically its so I can quickly test firewall and NAT rules.
View 7 Replies
View Related
