Fedora Servers :: How To Delete LDAP Data Base Bdb

Aug 29, 2011

Please let me know how to delete/flush complete LDAP database ? I tried deleting all files from /var/openl dap- data. but still top level data base attributes remains.initially I had set shadowExpire,shadowFlag etc, I want to remove all these.Kindly help me to build my new database.

View 5 Replies


Ubuntu Servers :: OpenLDAP Admin / Get This Data Into LDAP?

Apr 28, 2011

I have set up an OpenLDAP server to use as an common address book for my users.
I have all the addresses in a spreadsheet.

Is there a easy way to get this data into LDAP?

View 2 Replies View Related

Software :: Data Base For Fedora 12

Jul 12, 2010

I want interface any free data base software to fedora 12 version.

View 15 Replies View Related

Fedora Servers :: Error: Cannot Find A Valid Baseurl For Repo: Base

May 1, 2011

I have a VPS with Fedora 13 32 bits.

[root@mbr ~]# cat /etc/fedora-release
Fedora release 13 (Goddard)
[root@mbr ~]# yum install cyrus-sasl-md5

Loaded plugins: fastestmirror Repository updates is listed more than once in the configuration Determining fastest mirrors YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. 13 is not a valid release or hasnt been released yet/ removing mirrorlist with no valid mirrors: /var/cache/yum/i386/13/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base

I tried

# yum clean all
# yum list

View 2 Replies View Related

Ubuntu :: Desktop Envinroments \ Use On A Police Car Data Base Or Department?

Aug 2, 2010

i am new with ubuntu i need to know can i use ubuntu on a police car data base or department?

View 1 Replies View Related

Fedora Servers :: How To Configure LDAP Technology

Mar 20, 2009

How to configure ldap technology in fedora & linux.

View 3 Replies View Related

General :: Data On Disk Drive Management By OS - Getting Base I/O Unit Size?

Mar 31, 2010

I want to ensure I have done all I can to configure a system's disks for serious database use. The three areas I know of (any others?) to be concerned about are: I/O size: The database engine and disk's native size should either match, or the database's native I/O size should be a multiple of the disk's native I/O size. DMA: Disks that are capable of Direct Memory Access (eg. IDE) should be configured for it.
Write-caching: When a disk says it has written data persistently, it must be so! No keeping it in cache and lying about it.

I have been looking for information on how to ensure these are so for CentOS and Ubuntu, but can't seem to find anything at all. I want to be able to check these things and change them if needed. The actual hardware involved is very modest. The point is to get the most out of what hardware we do have, even though it's "not very serious hardware" from a broader perspective.

View 1 Replies View Related

Fedora Servers :: Configure LDAP And Client On Windows XP

May 29, 2009

I'm new LDAP kind of stuff.I want to configure LDAP server and Client on windowsXP. could you tell me which Open source LDAP Server and client are best fit for windowsXP. Is OpenLdap not suitable for windows?

View 8 Replies View Related

Fedora Servers :: 389 Directory Setup - Using PHP LDAP Admin

Jun 19, 2009

I just configured my first Directory Server. I was looking to use PHPLDAPADMIN to start administrating it. Any good how to's or Tut's?

View 4 Replies View Related

Fedora Servers :: F13 - LDAP Multiple Direct Map In AutoFS

Sep 18, 2010

I am using LDAP to manage the autofs and everything works fine. I have a situation here that I can't figure out how to do. I need to use 2 direct map in auto.master, but the LDAP service doesn't allow me to add 2 "cn: /-" entries in the directory.

The following is my auto.master map:
dn: ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc= com,dc=my
objectClass: automountMap
objectClass: top
ou: auto.master
dn: cn=/-,ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc =com,dc=my
objectClass: automount
objectClass: top
automountInformation: ldap://ldap.example.com.my/ou=auto.iso.indirect,ou=autofs,ou=dolphin,dc=examp le,dc=com,dc=my
cn: /-

I have another ldap entry auto.data.indirect but I have no idea how to inject it into the directory. Any ideas how to implement it? I am using Fedora 13.

View 3 Replies View Related

Fedora Servers :: Access 'description' Attribute From LDAP?

Sep 5, 2011

how can i access 'description' attribute stored in LDAP server from LDAP client(pam_ldap,nss_ldap).

View 2 Replies View Related

Server :: How To Delete User Account From LDAP

Feb 4, 2010

I configured LDAP. But added a user mistakenly, how can I delete that user account from LDAP. How to create home directory for LDAP users.......

View 1 Replies View Related

Fedora Servers :: Open LDAP Installation/Configuration Failed?

Sep 7, 2011

I am trying to configure and compile the pam_ldap and nss_ldap for MIPS architecture. for this they need ldap library. so I am trying to compile openldap code for MIPS first, but the configuration is failing.The command and options used for configuration is as follows.

./configure --host=mips CC=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-gcc LD=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-ld CFLAGS="-g -O2 -I/usr/include -I/usr/include/openssl" LDFLAGS="-L/usr/lib" --prefix=/mips/ldap --with-yielding_select=no


View 1 Replies View Related

Fedora Servers :: LDAP Authentication Of Unregistered User At Client Side?

Sep 2, 2011

I have a openldap server running on one machine (fedora10) and pam_ldap.so and nss_ldap.so running on the other machine.

I have added a new user to the LDAP server database, this user is not created on client machine.

1. Can i login to the client machine using this new user?

2. Now if i try logging with this new user I am getting error messages, the error messages are as follows at client side

Sep 2 10:34:36 localhost sshd[8484]: Invalid user kim from
Sep 2 10:34:36 localhost sshd[8485]: input_userauth_request: invalid user kim
Sep 2 10:35:16 localhost sshd[8484]: pam_ldap: error trying to bind as user "cn=min soo,ou=people,dc=samsung,dc=com" (Invalid credentials)


View 4 Replies View Related

Server :: Open LDAP Root Password With Openldap-servers-2.3.38-3.fc8 Fedora 8 ?

May 21, 2010

I've setup an openldap server, and am trying to add .ldif files to the database.

I am constantly getting the following error, no matter what I do:

View 18 Replies View Related

Programming :: Find Logarithm To Base 10 Instead Of Base 2 On Shell Script?

Apr 20, 2010

can we find logarithm to base 10 instead of base 2 on shell script??i can do it with bc..like 'l(1000)/l(10)' | bc -l

View 1 Replies View Related

Fedora Servers :: Vsftpd And Permissions - Unable To Delete Anything

Jan 16, 2009

I'm rather new to Fedora server, but I'm attempting to run a music FTP server, where anonymous users can submit songs into one particular folder (so i can personally tag them), while other user accounts have full read-write. Here we go: I 2 directories, /music and /untagged

I want anonymous users to be able to read both directories, but only be able to upload to /untagged, and not be able to delete anything. I want users that I select to have full read-write-create-delete privileges. how would I go about this with vsftpd?

View 3 Replies View Related

Fedora Servers :: Cannot Delete Directory 'foo': File Exists

Jan 17, 2009

I was transferring some files from my laptop (running FC6) to a server at my work (don't know what kind) with "scp -rpC" and it stalled, don't know why.
Now when I try to delete the files from the server so I can start again I get the following error message

rm -r Single_injections/
rm: cannot remove directory `Single_injections/195320/400mA/010': File exists
rm: cannot remove directory `Single_injections/195320/400mA': File exists
rm: cannot remove directory `Single_injections/195320': File exists
rm: cannot remove directory `Single_injections': File exists


View 6 Replies View Related

Ubuntu Servers :: Install Base System Fails On 10.04

Feb 26, 2011

i'm trying to build a web server but I keep having a problem. Everything loads fine until I get to the "Install base system" part of the installation and it puts up a red screen warning me that the install has failed. My uncle gave me his ubuntu discs and even some different hard drives, but I keep getting the same problem at the same point of the installation. Here is the rundown of everything i did.

System #1 -
ASUS P5G41-M m/b with 4GB memory
Intel Core 2 quad q9300 cpu
two western digital 640GB hard drives

I was testing it out to run a raid 1 just to learn how to make a software raid array. its my first try at making a raid array. The first time i used ubuntu server 10.04 32bit and the system failed at the install base system point. I then used boot n nuke to clean the drives and tried 10.04 64bit. it failed at the same exact point. my uncle gave me 2 western digital 1.0TB hard drives and I tried again. I got the same results. At that point i gave all the hardware back to my uncle and he gave me a server board to try out because he bought it and hasnt touched it. so I built a second system.


View 2 Replies View Related

Fedora :: F13 SSSD And LDAP (ldap.conf) / Appear /etc/ldap.conf Is Being Ignored?

Oct 21, 2010

I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.

Relevant sssd.conf:
auth_provider = ldap
cache_credentials = True

View 11 Replies View Related

OpenSUSE :: Does KMail Account Data - Such As Login Data / Names Of Pop / Smtp Servers

Oct 6, 2010

Where apart from ~/.kde4/share/apps/kmail does kmail keep account data, such as login data/names of pop/smtp servers? I wanted to install an entirely clean version of kmail, so I uninstalled/re-installed kmail via YAST. I manually deleted ~/.kde4/share/apps/kmail. After installing kmail I found that the account data of my Yahoo account were still listed in the kmail configuration panel. Shall I delete the Yahoo account within kmail prior to uninstalling the kmail package?

View 4 Replies View Related

Fedora Servers :: Data Backup - Will Be Backed Up In Every 1 Hour ?

Jan 8, 2009

How to backup in such way that, data will be backed up in every 1 hour...but every time not full data;; only the data/file which have been modified within last 1 hour. Its on locally. And how to back up local data to remote system. Because I have tried with ssh-keygen also , but everytime its requiring password.

View 1 Replies View Related

Red Hat / Fedora :: Cannot Copy Files Between Servers - Data Gets Corrupted

Apr 13, 2011

I am attempting to copy files from one server to an external USB drive on a second server. Both servers are running custom RedHat Linux, kernel 2.6. Both are setup as Check Point SecurePlatform (one is a log server and the other a management server). I am trying to archive files from one (HP DL380 G5) to the second (HP DL380 G6). I am not able to archive directly to the external usb drive when connected to the HP DL380 G5 (data gets corrupted and switches to read-only access). The external USB drive has no issues when connected to the HP DL380 G6 server, thus my reason for trying to copy the files across servers.

When I attempt to use scp to copy files between the server, I am prompted for the password. Once entered the debug shows the authentication is successful, but then no files are copied (see log below). I have tried searching for potential answers, but none have panned out. Unfortunately I can't yet post the actual scp debug log output as some of the text is viewed as a URL and not yet allowed for me. I have changed all the atsign symbols to '(a)' to avoid the URL inference.

Output log from scp attempt follows:
[Expert(a)server1]# scp -p -r -v /var/fromhere/* copyfile(a)server2:/media/disk/tohere/
Executing: program /usr/bin/ssh host server2, user copyfile, command scp -v -r -p -d -t /media/disk/tohere/
OpenSSH_3.6.1p2, SSH protocols 1.5/2.0, OpenSSL 0x0090707f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: Connecting to server2 [] port 22.
debug1: Connection established.
debug1: identity file /root/.ssh/identity type -1 .....
debug1: Exit status 1
lost connection

View 1 Replies View Related

Ubuntu Servers :: Access The Data In .fbd Data File

Feb 19, 2011

We purchased a new database system at work last October, ditching the old system because of a lack of support from the vendor. This is a retail Point of Sale and Backoffice database system. I am not sure what system the new one runs on, but the system we replaced was a Firebird data base. The reason I am posting is because we are now in need of the information contained in the old database which was not completely imported into the new system.

Basically the problem is this: The database in on a Windows XP system and I found a copy of SQL Manager Lite 2008 on the system, which after quite a bit of studying, I figured out how to extract the database into a removable file. I have this file (178MB) on a USB stick in a file called Backoffice.fbd.

My studying suggests to me that I can get into this database with MySQL. I have never used this and have no clue how to do this. All I want to be able to do get into the database and create tab deliminated spreadsheet files for each of the database sections (Customers, Repairs, Sales History, stock files, etc.) Is it possible to do this with Ubuntu and MySQL and if so, can expert suggest one or two things to get me started. While a guided tutorial would be nice because I am not an expert, I am willing to learn on my own if someone could point me in the right direction.

View 3 Replies View Related

Ubuntu :: Ddrescue Delete My Data

Jun 2, 2010

I tried to clone my laptop ubuntu partition (9.10) using ddrescue into my portable harddisk.I run command "ddrescue r3 /dev/sda6 /dev/sdb6" sdb6 is my portable harddisk partition with lots of data. In my head I was thinking that it will create image file (like iso or img)that can be restored to another disk.Suddenly I relize that it delete my existing data (in sdb6) then I interrupted ddrescue.Is there a way that I could get back my data in sdb6?Partition in sdb6 is FAT32m, now when I try to open sdb6 using Windows OS, it always aks me to format

View 6 Replies View Related

Ubuntu :: GUI App To Delete Data Permentantly?

Sep 15, 2010

Is there a GUI solution to permanently destroying data on my external HD? I know there are some command line options but I am looking for a GUI solution.

View 7 Replies View Related

Server :: Trying To Delete Data From File With Php

Oct 20, 2010

i've been using php/fwrite to add text to a file using the below code but how do i remove text from a file? note that i don't know what line it's on as there will be other content in the file.

View 5 Replies View Related

Fedora Servers :: Squid Configuration For Limited Data Usage?

Jul 14, 2011

I am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.

View 1 Replies View Related

General :: Delete The File And Its Actual Associated Data?

May 12, 2011

I'm confused about "hard link" feature. I've been learning from my UNIX Academy DVDs training that hard links to a file can be many and each of them is an effective filename for the associated data. So let assume that we have some very sensitive data in a file and we want it to be deleted and file has 20 links. I "delete" a file, but in fact I deleted only one "name" of it. My understanding from the training that data is still there until we delete the last associated hard link. But how can I find the names of all of them? If we have the names, they can be removed one by one. Or may be there's command that can trace all the "names" and remove them at once?

View 14 Replies View Related

General :: Configure 1000 Base T Ethernet Card To Send At 1000 Base T?

Sep 22, 2009

I have a router that is 1000 Base T and two computers each with ethernet cards that support 1000 Base T. All are equipped with Cat 5e cable. Before I had a router that only went up to 100 Base T and I would setup one box with linux running proftpd. On the other box,I would use win xp pro and use firefox to ftp into the other box and download a file. Download speeds went up to 11.2 MB/sec. Now when I switched routers, I expected something like 120 MB/sec but I'm only getting 5.3 MB/sec. What do I need to change?

View 12 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved