Fedora Servers :: LDAP Authentication Of Unregistered User At Client Side?
Sep 2, 2011
I have a openldap server running on one machine (fedora10) and pam_ldap.so and nss_ldap.so running on the other machine.
I have added a new user to the LDAP server database, this user is not created on client machine.
1. Can i login to the client machine using this new user?
2. Now if i try logging with this new user I am getting error messages, the error messages are as follows at client side
Sep 2 10:34:36 localhost sshd[8484]: Invalid user kim from 10.254.194.148
Sep 2 10:34:36 localhost sshd[8485]: input_userauth_request: invalid user kim
Sep 2 10:35:16 localhost sshd[8484]: pam_ldap: error trying to bind as user "cn=min soo,ou=people,dc=samsung,dc=com" (Invalid credentials)
how to make a new Ubuntu 9.10 box use our LDAP/Samba server for user authentication. Our Red Hat and Windows machines all use it just fine. I've been trying to use the auth-client-config and libnss-ldap packages for this purpose, but I must be missing something. I'm pretty green with LDAP, so this is my first time diving in... Is there a good How-To or step-by-step read on this? All of my searches lead me to setting up Ubuntu as the server, and that isn't what I want. I've also tried the steps listed in [URL] for the LDAP Authentication section.
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic AuthBasicProvider ldap anon Order allow,deny Allow from all
This part by itself works for the LDAP authentication:
Anonymous guest Anonymous_VerifyEmail Off Anonymous_MustGiveEmail Off Anonymous_LogEmail on Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
I've setup an Ubuntu 10.10 LDAP Client to authenticate off my LDAP server. I've install the following: sudo apt-get install libpam-ldap libnss-ldap nss-updatedb libnss-db nscd ldap-utils pam_ccreds Here's my /etc/nsswitch.conf: passwd: files ldap [NOTFOUND=return] db group: files ldap [NOTFOUND=return] db
I'm new LDAP kind of stuff.I want to configure LDAP server and Client on windowsXP. could you tell me which Open source LDAP Server and client are best fit for windowsXP. Is OpenLdap not suitable for windows?
I have a centos 5 system with openldap configured. I need openldap for simple user authentication. ie.. to be able to use it for authenticating it from remote applications and systems like mail clients...etc.
I was able to succefully install and configure openldap and ran a slaptest to verify the slapd.conf file for errors and found none. so now all i want to do is to add username and passwords to the ldap database.
iam just not sure what all objectClasses i need to use for Attributes uid and userPassword and what exactly should be the ldif file syntax for the above entries. I tried various sources but i do either get errors while adding or after adding do get errors trying to access it.
above all, iam able to access the ldap server from my phpldapadmin only as a anonymous user and not as a root user that i added as a first entry.
I've a webpage that has some links to videos. When an user click on that link, I need the user to redirected to the login page which check credentials with ldap server and then grants access to the video. I've searched google for some code but all I found is some samples that authenticates the user. But when the user enters the login credentials how do I implement that code in the backend and redirect to the video if the user can authenticate himself?
I'm working on a media delivery platform where when a user click on the rstp link of the video,it should sent the request and see if the user is a valid user(using his username and password)
I'm trying to utilize my company's IT orginazation's LDAP service (running on some sort of windows) for authenticating users on an Ubuntu box.Another group has done something similar for CENTOS; I've used their ldap.conf as a reference as well as ap-server.html (LDAP Authentication section)I can't get it to work. When I try to connect as my corporate user I see this in auth.log:
Code: Jan 14 14:32:24 Algalon sshd[7062]: nss_ldap: could not connect to any LDAP server as cn=ldapquery2,cn=Users,dc=<companyname>,dc=com - Can't contact LDAP server
I've just installed Ubuntu Server for the first time with the goal as setting it up as a proxy server for our Apple computers here since I can get neither ISA of OS X Server's firewall to play properly. So far I have the machine authenticating against our OS X OpenLDAP server and multiple NIC's setup ready to be connected to the outside world. My question is does anyone have a preference on what proxy I should be using? So far my search efforts seem to of turned up Squid Proxy as a favorite among Ubuntu users but I can't seem to work out how to get it authenticating against my OpenLDAP server.
i am taking another stab at this. The last time i attempted it, it seemed like everyone had a different way to do it, but nobody could give me an answer on how to do it...
I currently have a Domain Controller Running sme server and a domain controller, using ldap as a backend. I have two file servers runing ubuntu 10.04. My overall goal is to have it so when i create a username on the domain controller, it is then automatically copied over to the fileservers. This way everyone will have their own username and password to access the fileservers and ill be able to track what people do on the fileservers.
The next necessity is for me to be able to apply permissions to the folders on the fileserver based on the users that are created on the domain controller.
LDAP Authentication for Web Access I am trying to build a LDAP server to allow access to the wireless network in conjunction with Meraki wireless access points. I am using Ubuntu 10.10 and trying to install OpenLDAP from their documentation but I keep running into the error "configure: error: MozNSS not found - please specify the location to the NSPR and NSS header files in CPPFLAGS and the location to the NSPR and NSS libraries in LDFLAGS (if not in the system location)" I have OpenSSL installed but I also got these when I ran ./configure
checking openssl/ssl.h usability... no checking openssl/ssl.h presence... no checking for openssl/ssl.h... no checking gnutls/gnutls.h usability... no
I have 389-DS ( Fedora DS) setup on CentOS 5.3 and working fine. I configured LDAP Client and want to login as user created under fedora DS Client. From Client Machine, I can easily see: Code: [root@fedoraDS-Client ~]# id ajrain uid=569(ajrain) gid=569 groups=569 context=root: system_r:unconfined_t:SystemLow-SystemHigh
This is User from LDAP Server (fedora DS Server) which is showing in Client Machine. So It means its retreiving value from Server. Correct? Now When I am trying to login , it says "Server unexpectedly closed network Connection". When I supplied user password: Code: login as: ajrain ajrain@fedoraDS-Client's password:
The File /var/log/secure says: Code: Jan 27 02:39:27 localhost sshd[3996]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.210.53.104 user=ajrain Jan 27 02:39:27 localhost sshd[3996]: Failed password for ajrain from 10.210.53. 104 port 1241 ssh2 Jan 27 02:39:27 localhost sshd[3997]: fatal: Access denied for user ajrain by PAM account configuration
I am facing problem in adding new users in ldap server and client for a long time. I configure ldap server and client successfully and I can login the client machine by a user. User is created on server during configuring the server but after same time when I create a new user on server and create a home dir for the same user on client machine and assign 700 permission on home dir of same user and copy the /etc/skel/.* /home/user-dir and when run the command "#chown -R user:users /home/user" it shows invalid user error.
I would like to know whether ldap can be used to authenticate wireless clients with my server.server and clients are connected to a wireless router and i am able to get wireless adapter work in my ubuntu. Is there any anything extra which is required or the openldap server will work for wireless clients?
I have tomcat installed with port forwarding to http port 80. I configure ldap authentication for apache2(/var/www). But I could not configure tomcat for ldap authentication.
neither of which exist in the repositories, or anywhere on the internet. the best I could find was a request to build a package from over a year ago...
I did find source that I can build... the Perl module builds and starts to begin the setup process -- but I get stuck at the point where it requires the SDK... which I cannot find anywhere in a plain downloadable form. the one I found seems incomplete:
I am new to to dovecot and would like some help, so please be kind.I have one user that can send mail but not read it either by pop3 or imap.I am running Dovecot 2.0.11 on Fedora 14.
Making a Samba Server with LDAP authentication. Will post as I go along. Found these sources, anything/hiccups I should know before jumping in? Figure would follow the official documentation then check the others for comparative errors.
We're trying to validate LDAP authentication from Linux against our AD global catalog servers. I'm seeing lots of LDAP query tools, but what I need is a free/open source application that can use LDAP to query AD to authenticate... something as simple as entering the hostname/IP of our AD/global catalog server and the port, then passing an AD username/password to it to validate logon capability. Anyone know of any software/apps that can do this? I don't want to get into configuring Samba for LDAP or trying to authenticate my actual Linux server again AD... I just want an application that uses LDAP for authentication.
I have configured LDAP Server on RHEL 5.2 successfully and client can login to the server. But I do no how a client can change its LDAP password on his client machine.
My scenario is similar to this person scenario: http:[url]......Here at the clinics, we already have established leaf/shorewall firewalls. Our domain controllers are win2k3 boxes.I've installed ubuntu 9.10 on a sound desktop/server and installed two nics inside that box.How do I make Dansguardian talk to our domain controllers, and give users access to the internet via established groups? What would be the best way to do this?
I maintain a samba PDC for a small business, our current setup does not work very well; on a hardware upgrade I directled imported the old ldap database and attempting to add machines to the domain causes all sorts of trouble.
I'm 95% sure the original database (which predates my employment) was created using the idealx smb-ldap tools, unfortunately on our current platform (debian lenny) these tools seem to be broken; the only things hey seem to do reliably are set passwords and add posix users, asking them to do anything involving samba/windows causes errors. The idealx tools seem to be abandoned, and I don't know enough perl to try and fix them.
Since the idealx scripts seem to be abandoned, and most of the good samba+ldap how-tos references the idealx tools, I was wondering what people use nowadays to manage there ldap directories; surely they aren't importing .ldif files to add new users/machines like I've been doing. Are people just writing thier own management scripts/web-apps? Or are the smb=ldap tools just broke on debian?how to generate the NT/LM password hashes and proper SIDs, does anybody have anything they could point me to about this?
I have recently installed an ltsp system, client and server. Everything works except i cannot get my client side serial ports to work or register for that matter. Can anyone point me to the steps i should take to get these working.
how to login with ubuntu ldap server account from ubuntu client(karmic). Ubuntu server and client setup is done properly but not knowing how to login to ldap server graphically from ubuntu client. I don't want to login via SSH
(This was posted at the end of another thread, where it probably didn't belong, so reposting here)I have Active Directory set up on one machine (and I can't really adjust the settings very much) and Ubuntu Server 10.04, which I would like to use as a client.I followed the directions at https://help.ubuntu.com/community/LD...Authentication, but when I get to
Code: getent passwd I don't see anything from the LDAP, and ssh'ing into the box from an LDAP/AD username certainly doesn't work.
In addition, I've attempted to use Webmin's LDAP Configuration module to configure it. I can connect to the server and can browse it with the LDAP browser with my settings, but the Webmin package doesn't recognize the users (which are organized in one of four Organizational Units (OUs) within the OU that I have as my Search Base) as users,
I'm using NFS and I have the following problem. After ~100 days, the client and server lose connection, but the client doesn't know about this, it gives no error. The problem is that the changes on the server side aren't visible on the client side.
I am running a ubuntu server and want to host a web application (php/mysql based) however I dont want to use usernames and passwords for authentication. I'd like to use a client certificate. The military uses similar technology using the CAC card to provide the certificate for authentication.
not sure if this would be done using the apache modules or if php would be a better place to play with this
