Debian Configuration :: Can't Login On The Ldap-client Via Ldap
Aug 9, 2010
why i can't login on the ldap-client via ldap, so here is a short description of my machines (i use openvz virtualising)I have on the HN (Debian Lenny) 2 VE's, which are in the same subnet (192.168.1.0/24)The first VE (Hostname: ldap1, IP: 192.168.1.91) is the ldap-server, which is so configured, that i can manage the server via phpldapadmin.The second VE (Hostname: ftp1, IP: 192.168.1.31) is the ldap-client, there should run a sftp-server in the future and the sftp-server(ssh-server) should use ldap-usernames to login. on the ftp1, i get with this command getent passwd the users configured on the ldap-server, but with the command id USERNAME the result is, that the user doesn't exist. (USERNAME is this name, i get returned by getent) and if i try to login via ssh, i get permission denied. and because the machines are openvz-virtual-machines, so i can't login on them like on a normal system, but a su USERNAME doesn't work too, because the user is not known on the system.
my installation:
i don't think, that the ldap-server is the problem, because the phpldapadmin and getent on ftp1 are working perfectly, but if you want, i can post the config here too. the VE ftp1 was configured with the following how-to: [URL] and pam is configured like in the chapter "PAM setup with pam_ldap" on [URL]
View 3 Replies
ADVERTISEMENT
Mar 13, 2010
i have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
View 3 Replies
View Related
Apr 5, 2010
i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
View 11 Replies
View Related
Dec 2, 2010
I've setup an Ubuntu 10.10 LDAP Client to authenticate off my LDAP server. I've install the following: sudo apt-get install libpam-ldap libnss-ldap nss-updatedb libnss-db nscd ldap-utils pam_ccreds Here's my /etc/nsswitch.conf: passwd: files ldap [NOTFOUND=return] db group: files ldap [NOTFOUND=return] db
[Code]...
View 9 Replies
View Related
Sep 8, 2009
I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:
# rpm -qa | grep ldap
python-ldap-2.2.0-2.1
php-ldap-5.1.6-23.2.el5_3
[code]....
View 1 Replies
View Related
May 31, 2010
I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
View 3 Replies
View Related
Jan 26, 2010
I have 389-DS ( Fedora DS) setup on CentOS 5.3 and working fine. I configured LDAP Client and want to login as user created under fedora DS Client. From Client Machine, I can easily see:
Code:
[root@fedoraDS-Client ~]# id ajrain
uid=569(ajrain) gid=569 groups=569 context=root:
system_r:unconfined_t:SystemLow-SystemHigh
This is User from LDAP Server (fedora DS Server) which is showing in Client Machine. So It means its retreiving value from Server. Correct? Now When I am trying to login , it says "Server unexpectedly closed network Connection". When I supplied user password:
Code:
login as: ajrain
ajrain@fedoraDS-Client's password:
The File /var/log/secure says:
Code:
Jan 27 02:39:27 localhost sshd[3996]: pam_unix(sshd:auth):
authentication failure; logname= uid=0 euid=0
tty=ssh ruser= rhost=10.210.53.104 user=ajrain
Jan 27 02:39:27 localhost sshd[3996]: Failed password for ajrain from 10.210.53.
104 port 1241 ssh2
Jan 27 02:39:27 localhost sshd[3997]: fatal: Access denied for user ajrain by PAM account configuration
View 1 Replies
View Related
Jun 15, 2010
Any step by step guide for LDAP server & client configuration. From installation.... to.... client login to ldap ubuntu server.
View 2 Replies
View Related
Jul 11, 2010
how to login with ubuntu ldap server account from ubuntu client(karmic). Ubuntu server and client setup is done properly but not knowing how to login to ldap server graphically from ubuntu client. I don't want to login via SSH
View 2 Replies
View Related
Mar 17, 2011
I have an LDAP server holding user/pass/group for many users. Due to network issues, the server sometimes is unreachable and clients cannot login, current sessions usually freeze after a while. All client have ubuntu 10.04.2 x64.
I have went through the outdated howto to cache the LDAP credentials.
I setup the required packages
daily cron "nss_updatedb ldap"
and edited '/etc/nsswitch.conf' to have "files ldap [NOTFOUND=return] db" for both passwd and group.
[Code]....
View 2 Replies
View Related
Jan 26, 2009
So I've configured ldap on Centos5 64 bit and I can run "ldap search" and "gentent passwd" on the client/server and it shows my users info.
But I can't login via the cli or GUI.
I can login by doing;
su - username
at the client or server but I can't login by issuing;
login username
or at the GUI login screen.
View 2 Replies
View Related
Sep 28, 2010
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
View 20 Replies
View Related
May 31, 2010
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
View 4 Replies
View Related
May 18, 2015
I'm new to LDAP. I've installed LDAP Server and I stated:
Code: Select allaccess to * by * write
I can login with admin and anonymous, but when I try non-admin user ldap respond:
Code: Select all conn=1137 op=2 RESULT tag=97 err=49 text=
Is there any requirements for creating a non-admin login user, because the "user", that I've created is not ObjectClass: Posix-Account, but ObjectClass: person, organizationalPerson?
Also I've tried to add ObjectClass shadowAccount and SimpleSecurityObject, but without any success...
View 0 Replies
View Related
Jun 5, 2011
In the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.
I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):
Quote:
$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );
[code]...
I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).
View 5 Replies
View Related
Jul 2, 2010
I took to yast to install ldap. I creating the CA cert, server key and server cert and specified them during the yast ldap server dialogs.
The firewall is open for ldap.
I also went through yast's ldap client ... though I didn't exactly see to anything (presuably it wrote up a configuration file somewhere).
However when trying use the basic ldap tools, like ldapwhoami. Well it doesn't connect and gives me the above error. Of coure the ldap db is unpopulated as yet, so it probably is not able to say who am at all. But ldapadd doesn't work either.
It seems to point to my SSL usage not being correct .. so I'm trying to double check that now.
View 2 Replies
View Related
May 25, 2011
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
View 1 Replies
View Related
Nov 28, 2008
I'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):
The script is working beautifully on another host with debian.
View 7 Replies
View Related
Jun 10, 2010
LDAP authentication problem on debian squeeze? To my knowledge, I have everything setup properly to do ldap authentication + local authentication on a host. I can login as a local user. I can login as an LDAP user.
When I log in as an LDAP user, my primary group is set properly. It is an LDAP group. I can change the group ownership of files to LDAP groups using chgrp. So far so good. This all works as expected. The commands getent passwd and getent group work wondefully, and generate the expected results. I can newgrp to any *local* group, but if I try to newgrp to an ldap group, I get the following error:
setgid: Operation not permitted. I've tried googling and asked on #debian on irc.debian.org. No luck.
View 2 Replies
View Related
Mar 31, 2010
I've compiled openssh-5.4p1 on RHEL 4.8 with Openssl 0.9.8m + pam It works perfect without pam (pam-0.77-66), both with password and public key auth. Whith pam enabled and LDAP (openldap-2.4.21, from scratch) something strange happens: system users: I can do ssh with both password and public key LDAP users: public key works for remote users, still I cannot do ssh with just password. I'm trying a custom PAM configuration, because the default one (even with authconfig + LDAP ) blocks ssh even with system users.
My pam SSHD configuration is:
#%PAM-1.0
auth required pam_env.so
auth sufficient pam_unix.so likeauth nullok
auth sufficient pam_ldap.so use_first_pass
[code]....
My LDAP users are ok: i can do "su - " remote LDAP (so that nss_ldap is OK), also getent passwd and getent group is ok.
View 2 Replies
View Related
Oct 21, 2010
I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.
Relevant sssd.conf:
[domain/default]
auth_provider = ldap
cache_credentials = True
View 11 Replies
View Related
Jul 13, 2010
can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.
View 8 Replies
View Related
Oct 10, 2010
We have several FC machines (from 6 to 12) that use an OpenLDAP server running on Centos 5.4 for authentication. I have now tried setting up a FC13 workstation. I notice that the authentication GUI has changed and wants me to use Kerberos or a TLS enabled server. Is there a way to get FC13 to behave like FC12 in this respect. Or (less desirable) what changes do I have to make to the server to accommodate FC13?
The workstation knows who the users are, but will not authenticate if they try and log in.
[URL]
but it didn't work for me
View 11 Replies
View Related
Dec 7, 2010
I've followed the Host Based Authentication Part from this page: [URL]...I cannot get it to work. When I delete the 'ldap' from the shadow line in /etc/nsswitch.com all my ldap users cannot login. Yes I've uploaded the ldapns.schema, activated hostObject and added the machine name to the host attribute to my test ldap users. I get this error from /etc/auth.log: sshd[3979]: pam_ldap: ldap_initialize Bad parameter to an ldap routine
[Code]...
View 3 Replies
View Related
Jan 30, 2010
I tried collecting steps for LDAP Client setup.
View 3 Replies
View Related
Jan 10, 2010
I have 389 fedora Directory Server which is nothing but LDAP Server running on 389 Server.Its working fine on CentOS. Now I am in search of script which can be put on boot time so that the new Machine can automatically come under LDAP Client.Generally the machines are RHEL 4/5.
View 6 Replies
View Related
May 2, 2010
I am facing problem in adding new users in ldap server and client for a long time. I configure ldap server and client successfully and I can login the client machine by a user. User is created on server during configuring the server but after same time when I create a new user on server and create a home dir for the same user on client machine and assign 700 permission on home dir of same user and copy the /etc/skel/.* /home/user-dir and when run the command "#chown -R user:users /home/user" it shows invalid user error.
View 1 Replies
View Related
May 29, 2011
I have configured ldap client on openSUSE 11.3 with yast2config. Since I am able to get list of all users through getent, it seems configuration done properly. But while logging in with ldap id its prompting for password change.
Code:
login as: testuser
Using keyboard-interactive authentication.
Password:
Using keyboard-interactive authentication.
Your password has expired. Choose a new password.
You are required to change your LDAP password immediately.
Enter login(LDAP) password:
I have other solaris machine as ldap clints, which are working fine.
Do I need to change any pam config?
View 1 Replies
View Related
May 23, 2011
I had a machine that is using ldap, but need to remove it completely.I edited the /etc/nsswitch.conf and removed all references of ldapand renamed /etc/ldap.conf to /etc/ldap.conf.bakI can log in as root, but cannot log in as any user in /etc/passwdIn the /var/log it shows pam_ldap: missing file "/etc/ldap.conf"I am guessing I am missing something else?I never set this machine up for ldap, was here when i got here, so not sure of steps to even put ldap on.
View 2 Replies
View Related
May 29, 2009
I'm new LDAP kind of stuff.I want to configure LDAP server and Client on windowsXP. could you tell me which Open source LDAP Server and client are best fit for windowsXP. Is OpenLdap not suitable for windows?
View 8 Replies
View Related
