I'm using comcast, and I setup my server, everything works fine.But later I found out that the server inet address is changing everyday, and it makes my server almost not accessible.Is there anyway to fix that problem??
View 5 RepliesIf I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?
View 2 Replies View RelatedI've been struggeling with this for a few hours now, googleing and so on trying to find an easy way to just switch which device I want as primary for internet connections. After long battles I'm at a loss, this is the current automatic routing
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
85.225.76.0 0.0.0.0 255.255.252.0 U 1 0 0 eth0
85.225.76.0 0.0.0.0 255.255.252.0 U 2 0 0 wlan0
[Code]...
I wish it was under better circumstances...very morning at 6:25am syslog-ng stops logging, right after it attempts to log rotate. its odd... the daemon doesnt die... it gets a new PID, but doesnt write the output to /var/log/syslog.Yet if I manually restart or reload syslog-ng it works great... its just like it doesnt like the logrotate...I have googled around and tried a few things...first I changed the postrotate in the logrotate.d/syslog-ng
--------/etc/logrotate.d/syslog-ng---------
/var/log/syslog {
rotate 7
[code]....
Im running ubuntu server 10.10 on my wirtual mashine at home. For now i have few service installed and configured:apache with phpand mysql support,ftp,phpmyadmin.. My ip address is not static, i tryed to configure by following some guide but without success.
First i edit this in /etc/network/interfaces (changing dhcp to static
Code:
# The primary network interface
auto eth0
iface eth0 inet static
[Code].....
I am using centos server, i delete and touch maillog file in /var/log/maillog but every other days it gets about 3 - 4GB please help how can i stop this
log are like this
Code:
Jun 27 04:23:09 localhost postfix/smtpd[25765]: warning: not enough free space in mail queue: 0 bytes < 1.5*message size limit
Jun 27 04:23:10 localhost postfix/smtpd[25765]: lost connection after MAIL from unknown[200.74.196.82]
Jun 27 04:23:10 localhost postfix/cleanup[25987]: 3F8E110011: message-id=<20100627032310.3F8E110011@localhost.bgssuk.com>
Jun 27 04:23:10 localhost postfix/cleanup[25987]: warning: 3F8E110011: write queue file: No space left on device
[Code]...
I have a server A that needs to connect to another server (B) to transfer data everyday.[A] ==SFTP==> [B]
I am using SFTP for the data transfert between A and B. I configured B to allow authentication only with a key, not with password. However, anybody who acccess the filesystem of A, could steal the password.
So I thought I could password protect the private key from A. But in such a case, I need to store the password somewhere on A, so the server A can access the private key to connect to B. Finally, it is endless: i always have to store somewhere a secret on A. Is there another solution that allow to have an authentication between A and B without storing plain text secret on the server A ?
how to change ip address on centos 5.3 ?i could not search the file such as "interface" ,
View 3 Replies View RelatedI have 3 ip address on my VPS and I need to change exim configuration to listen only on one ip address.
VPS have WHM and Cpanel installed.I changed in exim configuration interface to my ip.
I've setup a Ubuntu 9.10 LAMP server to host a word press blog on an intranet. I've got everything working except the url for the site.The IP address of the server will take me to the site URL.../But I'd rather use the server's name instead of the IP address URL...When i try to go to URL... in Firefox or IE it give me a server not found page and changes the URL to URL...I also have Webmin installed on the server and I've been playing around with the Apache module and can't figure out how to set it so i can use the server name instead of the IP address to get to the site.
View 6 Replies View RelatedI installed LAMP server at my debian lenny. people can't view my webpage via my ip address. How to active my ip address?
View 4 Replies View RelatedFor changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command
And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?
Can anyone tell me how i change the default domain name for cron?everything i cron runs it emails from and to user@com.com
this leaves me with a massive list of failed mails in postfix.i have mailto on my main crontab but i cant do it on all of them.
I have no idea what is going on here and this is the second time it has done this but. I just installed Lucid Lynx Desktop Edition for my Server. I have installed apache php5 mysql binarys. I have 3 ips on the machine 10.0.1.30, 10.0.1.37, 10.0.1.38. .30 is the main ip 10/100 the rest are 10,100,1000 ports. I can only access Apache 2.2 over .37 or .38 but not .30
I have not used Ubuntu alot but I am starting to and this really pisses me off since all my computer have aliases to the machine through .30
I have 4 servers that I got at auction and they now have ubuntu running with gnome interface.I installed apache2 and tried to edit the conf file but i am not sure if it is a router issue a dns or the config.I am trying to figure out how to set the server to hold the domain from a dynamic ip address and also how to create some test page to see if i can acess from the internet.
I have purchased some books on the command lines and how ubuntu works, I am understanding it so far, but dont know how to have a directory for the dns request to point to for the sitewhat i want to do with the servers...voipeb server for about 4 websites - one is for a volunteer rescue organization, another for a test auction site and 2 portfolio sitesremote file access- if possiblealso on a side note, is it possible to have a message relay from one cell phone or transmit to the server and have it send sms message to cell phones? - this will be used for the rescue group as well.
Is there a way to synchronize the address book in Outlook when the user works on multiple windows computer, and the server in the internal network runs under Linux ?
View 1 Replies View RelatedI have installed Fedora 11 and I have set it up as a web server with Apache. I have a domain name from GoDaddy that I own and I have set it to my web server. I am able to type the address into a browser on a computer outside of my network and it will pull up the web pages on the server. the problem that I am having is that after I type the URL, it gets replaced with the IP address. [URL] I know that I need a nameserver to resolve the IP address but I can not figure out how to do it. I have tried to use Bind but I can never seem to get it to work.
View 3 Replies View RelatedI am trying to get the MX record using dig command supplying IPv6 address of host. but i am getting connection timed out .
while with IPv4 address and host-name its working fine.
I have a problem with my Terminal Server Client, I cannot seem to connect to any windows server via IP address. Can anyone please recommend any tool I could use to connect? I need to work on the server for admin interfaces example Admin Kits for workspace protection
View 9 Replies View RelatedI've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
what is Production IP address and Management IP address in Linux servers? What is the significance of these two? When to use what?
View 3 Replies View RelatedI want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
I'm working on a remote Ubuntu 9.10 server, which is accessed via VPN. I installed Joomla, but had difficulty uploading new components, which I traced to a file permissions problem. I used FileZilla to FTP onto the site and tried to make the chmod changes I needed, but the commands kept failing. Eventually, I contacted the sys admin and told him I thought that there was an ownership problem with the directories. He checked and told me that I was logging in with exactly the same user name and password that he was using (it's not a live system currently) and that he could make chmod changes without any problems. Because all my attempts were still failing, he eventually did the following:
chown -R administrator:administrator /var/www
/var/www is where all the Joomla files are stored and Administrator is the user name.Now I find that when I run a chmod command in FileZilla, the server reports that it worked (see below):
Status:Connected
Status:Retrieving directory listing...
Command:CWD /etc
[code].....
However, if I go back and check the tmp folder permissions, I find that they are still set to 777.This still looks like an ownership problem to me, but I don't understand why the server seems to think that the chmod changes are working, when they aren't.
I finally got the server running. All seems OKAY, however I want to change the default player on my server. As of now, when I upload a file, it plays but has no "play/pause/stop/mute/fullscreen" buttons. How do I get those? I've tried installing FFMPEG, MPlayer and a few others to no avail. Please suggest a tried&true method of allowing for this. I need it to be able to at least play audio(mp3) and video(mp4,wmv,avi,flv)
View 4 Replies View RelatedI have been running two Ubuntu 10.10 servers for some time now. My main server is 10.111.1.65 and backup server is 10.111.66. The main server is to host my website and ssh remote access (Key auth). The backup server pulls via ssh key auth what is in my /var/www (among other folders) to the backup home dir (encrypted). For some reason today I checked the uptime and it was 7 hours on both servers. All my other computers on the same power supply have a uptime of over a month. For some reason I now cant access backup via ssh from main's key (I could before) and I can not get to the home dir, see below:
Code:
carlos@UbuntuSvrDell2400:~$ sh "Access-Your-Private-Data.desktop"
Access-Your-Private-Data.desktop: 1: [Desktop: not found
[code]...
I've been attempting to figure this out for about 4 days straight, so far it has not been fruitful. I've installed Ubuntu 10.04 server onto my former gaming system, Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2 cores with 2 GB ram. Overkill I'm sure, especially for a simple personal voip, htpc, storage server.
The problem is only noticeable when I have the vent server running, on the 10.04 server, and I attempt to connect to it through the LAN via the client on my windows computerEverything works fine and connects, LAN and from the outside, as long as the server is set to DHCP. However when attempting to switch to a static IP address, the vent client will not detect the vent server at all.Aside from an annoyance at having to stick with DHCP, I am still curious as to why the static settings will not function. Something so simple has turned into something quite difficult.
I can still connect to the Webmin interface and Putty into server with either DHCP or static IP enabled.I've performed the following troubleshooting steps so far:1) Followed the directions at https://help.ubuntu.com/8.04/serverg...iguration.html2) Edited the /etc/network/interfaces file through the CLI with nano and through notepad on the windows computer3) Through Webmin I've assigned the static IP, although for some reason it does not include a gateway field.4) I've rebooted the server5) I've issued the CLI
Code:
sudo /etc/init.d/networking restart
Here is the file /etc/network/interfaces:
[code]....
I have a ubuntu server running on a ten year old desktop and it runs great but i cant seem to change the video out put away from the normal anolog port to a TY port.My server is just for home use and I do not know the terminalThe reason I need to move to the other port is I do not have a screen for it but I do have a little old TV that will work.
View 2 Replies View RelatedOn Ubuntu Desktop editions, there is a GUI application which allows easily changing to a different server. It can even find out how one is the fastest update server.Is there a corresponding command line tool available to do this? Because I'm using the Server edition without GUI. I hate to manually edit /etc/apt/source.list.
View 4 Replies View RelatedI installed server 10.10, but it has the wrong keyboard layout. Can i change it to swedish via ssh, because the keyboard preferences wont start via the vnc?
View 1 Replies View Relatedi need to change ssh port on the servers including centos and ubuntu when i make changes to /etc/ssh/sshd.config and change the port to something else restart sshd then i can determine that port 22 is not working but ssh does not connect to new port it says "no route to the host"
View 9 Replies View Related