I start httpd but status shows: httpd dead but subsystem locked
get another message: starting httpd98) address already in use: make _sock: could not bind to address [::]:80
bottom line is I can load the Apache web page.
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
I have an installation of F12 where I used VMM to create and run four virtual machines.
If I set the machines to start at boot in VMM, but set my host to not boot all the way into X, the VMs don't boot.
IS that suppoed to be that way? Does VMM's auto-boot of VMs depend on some X or GNOME stage?
If so, what's the best way to fire up the VMs such that it doesn't conflict with any subsequent use of startx? (Don't eant to end up with double the machines just because I had a need to fire up X on the host.)
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies View RelatedI am currently using FC10 on a Dell 4600 with 2GB of ram. I love Linux as it is the most stable OS around. My end goal is to have the machine boot and start the vncserver automatically, eventually using an ssh tunnel to make it secure. My main problem is the vncserver is not starting on boot, I must login as a user then it works great. the error I get is
[Code]....
Basically what happens is the vncserver fails on boot however, if I login to the Fedora box I am able to connect and I get the GDM login screen. I have read many, many posts but have not been able to get over the boot issue. I really want to make this a headless box I can put in another room so I have more room for my musical gear.
I'd like to start tomcat from eclipse, however, I get several Exceptions preventing tomcat to start. I can however start tomcat from the console, provided I do this as root :
Code:
# su -
# service tomcat5 start
Starting tomcat5: [ OK ]
And I do get the page saying that I've setup Tomcat successfully when going to http://localhost:8080 in my browser.
I am running a server init3.During boot I would like to start some services inside screenie. IRC chat, rtorrent etc.How do I do this?
View 1 Replies View RelatedJust upgraded to F15 and I cannot seem to get the sendmail service starting at boot time.It starts and works just fine by hand after boot, so there's nothing wrong with the sendmail
configuration itself."runlevel" shows a current run level of 5 and "chkconfig" shows sendmail on for run level 5.All the other mail service (mailman, clamd, etc.) start fine.Doing "service sendmail start" after boot gets everything up and running just fine, but itsure would be nice to have it run at boot like it used to
so my server is doing fine, but there is one odd thing I would like to fix. When I start and stop services, the CPU is maxed out for about five seconds each time. The services start the same speed, but it still does this. Small things like lm_sensors don't do this, just things like httpd and sendmail. THis server was upgraded to Fedora 11 with a netinstall CD a few months ago.
View 4 Replies View Relatedwhat is Production IP address and Management IP address in Linux servers? What is the significance of these two? When to use what?
View 3 Replies View RelatedJust Installed Fedora 10 on Dell PowerEdge 2950. Installation went fine. Problem is I cannot Assign a Ip address to eth0. Service "NetworkManager " dies on its own "ifconfig eth0 192168.0.8/24" works though.
View 6 Replies View RelatedI just setup an application (phpcollab) on a linux machine, I was able to browse the app using localhost, but each time i try browsing it using the ip address, a blank page loads with a message saying "No input specified".
Whenever I try browsing the app from other systems on the network, I get a page cannot be found error message even though the other machines are successfully pinging the linux machine's ip address.
I need to browse it with the ip address because the app is to be accessed from other machines on the network.
I have installed Fedora 11 and I have set it up as a web server with Apache. I have a domain name from GoDaddy that I own and I have set it to my web server. I am able to type the address into a browser on a computer outside of my network and it will pull up the web pages on the server. the problem that I am having is that after I type the URL, it gets replaced with the IP address. [URL] I know that I need a nameserver to resolve the IP address but I can not figure out how to do it. I have tried to use Bind but I can never seem to get it to work.
View 3 Replies View RelatedI have MySQL installed on my Kubuntu 10.04 desktop machine which I use for developing web applications.First, all worked fine. But then I wanted to synchronize the database with the MySQL database on my laptop, so I had to allow connections from the LAN interface. So I addedCode:bind-address =192.168.0.100to /etc/mysql/my.cnf. This worked and the synchronization was performed. I want to do this on a regular basis so I would like to keep that line in there.The problem now is that MySQL does not start on system boot. When I start up, mysql simply is not started. There are no errors in /var/log/mysql/mysql.err or /var/log/mysql.err; these files remain empty.When I try to start it using 'sudo start mysql' I get the same result. The 'start mysql' shows up in 'ps aux', but the mysql process itself does not.Now, I found out that when I run
Code:
sudo -u mysql mysqld
The mysqld daemon does start, and the server works fine. To make matters even more strange, if I kill this
[code]....
I am trying to get the MX record using dig command supplying IPv6 address of host. but i am getting connection timed out .
while with IPv4 address and host-name its working fine.
I have an email server configured with postfix, dovecot, saslauthd and squirrelmail. It works great. In fact I'd even say it works too well: in squirrelmail, I can configure any sender address and my server will accept it. Message will be sent, wether the sender's address is [URL] or [URL]. Is there any way of limiting it in such way that only [URL] is accepted as sender's address?
View 6 Replies View RelatedI have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#
I am trying to install a Red Hat cluster on my servers. In order to configure an heart bit between the servers I must give a valid multicast address. I wanted to know if there is a way to validate a multicast address before using it. For example if it is already in use i don't want to use it.
I read a little about it and there is a Perl module called IO::Socket::Multicast: [URL] There is a tool called mcasttrest.pl: [URL] Oracle use it to test multicast. But I am not sure what will do the trick in Red Hat cluster.
I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting
I am trying to configure virtual alias using regular expression.
For example :
Email send to user.1@example.com and user.2@example.com will deliver to user mailbox.
Email send to user2.1@example.com and user2.2@example.com will deliver to user2 mailbox.
And the numbers or alphabet in between user name and the domain will be vary , I can't just do a normal alias.
I been try to play around with main.cf and the virtual alias table but still not able to get work. So I am not sure is the main.cf didnt configure correctly or the regular expression is not working.
Sometimes during bootup I get the following error:Starting Dovecot Imap: Fatal: listen(995) failed: Address already in useI tried to figure out what I could with the command lsof -i :995 and this was my output:COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMErpc.mount 2936 root 7u IPv4 9201 TCP *:pop3s (LISTEN)When the system boots without the dovecot error the output of losof -i :995 is as follows:
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
dovecot 3079 root 8u IPv6 9419 TCP *:pop3s (LISTEN)
pop3-logi 3157 dovecot 1u IPv6 9419 TCP *:pop3s (LISTEN)
[code]....
My ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?
View 6 Replies View RelatedIs it possible to run two servers through one ip address? And I don't mean through apache to run virtual servers. Right now my set up is: Cable modem>router>server.
View 9 Replies View Relatedmy local server here is not reachable when I type on the hostname so I am wanting to know if I am on the machine via ssh (I have a monitor and keyboard plugged into the tower)
How do I figure out what the servers IP address is? I have ubuntu server 9.10 and I looked at the etc/host, etc/hostname files and they have the correct server hostname
I have set up a new IP specifically for SSH and configured SSHD_Config accordingly to listen on this new interface and a specific port. However when I reboot SSH is not starting. Looking in the syslog it shows that it is unable to start. It looks like its trying to listen on the interface before it is set up.
Code:
Nov 29 13:00:23 anubis init: ssh main process (601) terminated with status 255
Nov 29 13:00:23 anubis init: ssh main process ended, respawning
Nov 29 13:00:23 anubis init: ssh main process (610) terminated with status 255
Nov 29 13:00:23 anubis init: ssh main process ended, respawning
Nov 29 13:00:23 anubis init: ssh main process (618) terminated with status 255
Nov 29 13:00:23 anubis init: ssh respawning too fast, stopped
I am able to start SSH manually once the server is booted. Do I need to set up my interfaces differently to ensure they are available prior to SSH starting somehow? I don't want to change my ssh config to listen on all addresses.
How can I start multiple X servers by logging into same user and using same desktop environment like KDE or GNOME. Is this possible by editing .xauthority, .xinitrc etc files?
View 1 Replies View RelatedMy mysql server won't start on my machine. It simply fails with no errors.
Code:
sudo /etc/init.d/mysql restart
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [fail]
When I run cat /var/log/mysql.err the file is empty, thinking this might be a permissions issue
I tried chowning to a mysql user. Here's the current permissions.
Code:
ls -alh /var/log/mysql*
-rw-r----- 1 mysql adm 0 2009-09-30 11:08 /var/log/mysql.err
-rw-r----- 1 mysql adm 0 2010-01-15 09:07 /var/log/mysql.log
-rw-r----- 1 mysql adm 20 2009-11-25 07:35 /var/log/mysql.log.1.gz
-rw-r----- 1 mysql adm 20 2009-11-24 07:59 /var/log/mysql.log.2.gz
-rw-r----- 1 mysql adm 20 2009-11-23 07:56 /var/log/mysql.log.3.gz
-rw-r----- 1 mysql adm 20 2009-11-22 07:54 /var/log/mysql.log.4.gz
-rw-r----- 1 mysql adm 20 2009-11-21 07:47 /var/log/mysql.log.5.gz
-rw-r----- 1 mysql adm 20 2009-11-20 07:43 /var/log/mysql.log.6.gz
-rw-r----- 1 mysql adm 20 2009-11-19 07:35 /var/log/mysql.log.7.gz
/var/log/mysql:
total 8.0K
drwxrwsrwx 2 mysql adm 4.0K 2009-09-30 11:08 .
drwxr-xr-x 16 root root 4.0K 2010-01-15 10:24 ..
Still having the same issue, mysql server is still failing and /var/log/mysql.err is still empty.
I am having problems with bond0 starting at boot on ubuntu server 9.10. After I do a restart I have to manually start the network with "ifup bond0". I have installed the built package (ifenslave-2.6_1.1.0-15ubuntu1_i386.deb (as indicated in Bug #482419)).
I have setup bonding for mode=6 with miimon=100 using eth0 and eth1 (both are Intel 10/100/1000 ports using an aic79xx network driver).
The contents of the aliases file are:
alias bond0 bonding
options bond-mode=6 miimon=100
The contents of the interfaces file are:
auto bond0
iface bond0 inet static
address 192.168.15.60
netmask 255.255.255.0
gateway 192.168.15.1
slaves eth0 eth1
bond-mode 6
I have it downloaded (linux version). What folder should I put it in?? Does it matter?
I am new to bash so i dont know how to start the Ventrilo Server up.
I navigated to the folder the server is in and did ./ventrilo_srv and ./ventrilo_srv -d and they both come up "No such file or directory".
How would I make sure cron is running every time my server is turned on? I want to make cron jobs, but I need to know that it is running when the server boots. Also, I used a program at some point that was terminal based and it showed be what programs ran when the server booted up. It allowed me to check a box and select which programs I could run at boot. If someone could tell me this program,
View 2 Replies View Related