Ubuntu :: Give Server A Actual Address And Not Ip Address?
Mar 15, 2011
i am pretty much brand new to ubuntu i have messed around with it a little and have gotten my apache2 server up and running what i have some questions on is
1. How can i give my server a actual address and not my ip address?
2. Is there any way i can put like forum software on part of it? if so how?
3. What is the best way to write web pages i know some html so thats how i was able to write what i have now just wondering what best way is
Im trying to setup dhcpd to put certain systems witch have mac address starting with 08:00:* in a certain ip class. How can this be done?So any system with mac address starting with 08:00 to get an ip from this range 192.168.12.2-192.168.12.99.
I am new to Linux so thought it would be a good learning exercise to try and setup an FTP server using linux.I have downloaded and installed Ubuntu 10 server edition and installed vsftpd, following instructions found on here I have configured the software and I can connect from an FTP client on my windows PC across the internal LAN.I have a couple of questions if I may:
1) a post on this forum suggests that local users can access the FTP server if the correct line is enabled in vsftpd.conf - I have done this and the fact that I can access it shows this is working I would think, however users added subsequently with the useradd command cannot access the server. Filezilla shows a could not connect to server error.
2) how do I give the server a fixed IPv4 address? It is currently using DHCP
3) I need to be able to put files into users folders for them to access offsite, but I don't want them to see each others filesfolders, can I do this?
If I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?
I hv Cent OS 5.3 installed as server. I hv a network of approx 100 desktops and laptops. For a security purpose i want to block certain laptops from gaining a the network access using dhcp. Can we block the ip address leasing if a specific MAC address request for a ip lease?
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down. Unable to open logs
I am new to apache2 server i have been trying to start the server using the default httpd.conf file provided in the source code but when i give the following command sudo /usr/local/apache/bin/apachectl start i receive the above error and the server shuts down.
I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example IP :192.168.0.2 gateway:192.168.0.1 dns:202.56.230.5 dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1 255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
Im an academic (university networks and security lecturer) studying/teaching network and operating system security, and inspired by the work of Hovav Shacham set about testing ASLR on linux. Principley I did this by performing a brute force buffer overflow attack on Fedora 10 and Ubuntu 9. I did this by writting a little concurrent server daemon which accidently on purpose didnt do bounds checking.
I then wrote a client to send it a malicious string brute forcing guessed addresses which caused a return-to-libc to the function usleep with a parameter of 16m causing a delay of 16 seconds as laid out in [URL] Once I hit the delay I new I had found the function and could calculate delta_mmap allowing me to create a standard chained ret-to-libc attack. All of that works fine. However .... To complete my understanding I am trying establish where I can find the standard base address for ubuntu 9 (and other distros) for the following, taken from Shacham:-
Quote:
[code]....
/proc/uid/maps gives me some information but not the base address ldd also gives me the randomised starting address for sections in the user address space but neither gives me the base address. Intrestingly ... when a run ldd with aslr on for over (about) 100 times and checked the start point of libc I determined that the last 3 (least significant) hex digits were always 0's and the fist 4 (most significant) where between 0xB7D7 and 0xB7F9. To me this indicated that bits 22-31 were fixed and bits 12-21 were randomized with bits 11-0 fixed. Although even that doesnt define the boundaries observed correctly.
Note: I am replicating the attack to provide signatures to detect it using IDS, and for teaching purposes. I am NOT a hacker and if needed to could reply from my .ac.uk email address as verification.
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
In firefox you can type ubuntuforums and it will bring you here via a google query.Mines stopped working the address bar goes to http://ubuntuforums/ and I get a forbidden page.I've check about : config and all is set fine
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code: num_nodes is set 64 INITIALIZE THE LIST xListHead 34 45 channel.cc:sendUp - Calc highestAntennaZ_ and distCST_ highestAntennaZ_ = 1.5, distCST_ = 550.0 SORTING LISTS ...DONE! code....
I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
I need a small shell based program that prints the mac address of physical ethernet adapter from it's firmware. I need this utility for license generation and appliance activation. I have tried several example but none of them is flawless, The easiest method I have found is to parse the output of "ifconfig" command but it has also some drawbacks.
1. Firstly program should differentiate between physical and virtual adapters. Physical means installed on board(wired or wireless) or installed additionally. Virtual adapters are those created by VPN or created by virtualization apps such as VirtualBox/VMWare etc. I am not interested in virtual ones.
2. In case of more them one physical adapters(wired and wireless), it should print the mac address and description(name & vendor) of both/all adapters.
3. If media is disconnected then also it should be able to read the mac address and description(name, vendor) of card.
4. This one is bit complex. I know that 'ethtool' can show you the universal mac address but it's limited to use only 2 types of drivers and won't work in all cases.
I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
When I try to access at physical address (0xD0000), we known that it is necessary to convert physical address to virtual address using function IOREMAP(0xD0000, 1024) and return me 0xC00D0000.
Now our doubt is when I have a board with I/O in address 0x150, is it necessary to convert this address to other virtual address??? or with inb(0x150) return me state of I/O in this address? How can I known where is this I/O address in my map memory?
