Ubuntu Servers :: Apache Use Server Name Instead Of IP Address
Feb 25, 2010
I've setup a Ubuntu 9.10 LAMP server to host a word press blog on an intranet. I've got everything working except the url for the site.The IP address of the server will take me to the site URL.../But I'd rather use the server's name instead of the IP address URL...When i try to go to URL... in Firefox or IE it give me a server not found page and changes the URL to URL...I also have Webmin installed on the server and I've been playing around with the Apache module and can't figure out how to set it so i can use the server name instead of the IP address to get to the site.
View 6 Replies
ADVERTISEMENT
May 17, 2010
I have no idea what is going on here and this is the second time it has done this but. I just installed Lucid Lynx Desktop Edition for my Server. I have installed apache php5 mysql binarys. I have 3 ips on the machine 10.0.1.30, 10.0.1.37, 10.0.1.38. .30 is the main ip 10/100 the rest are 10,100,1000 ports. I can only access Apache 2.2 over .37 or .38 but not .30
I have not used Ubuntu alot but I am starting to and this really pisses me off since all my computer have aliases to the machine through .30
View 5 Replies
View Related
Mar 20, 2010
my Apache2 was running fine for a while. Bur yeserday when I tried to start it again after a couple of weeks of vacation, I got the message:
* Starting web server apache2 [Sat Mar 20 10:48:12 2010] [warn] The Alias directive in /etc/phpmyadmin/apache.conf at line 3 will probably never match because it overlaps an earlier Alias.
[code]....
View 7 Replies
View Related
Jul 2, 2010
What is the (officially) proper way to configure Apache so that a given IP address can have two or more virtual host names, each going to different distinct configurations (e.g. with different DocumentRoot, Alias, etc), and also do this for the IP address so that it goes to a designated configuration rather than defaulting to the first or a random host name?
Apache documentation does not appear to address this. If so, it has it hidden in a non-obvious place.
View 7 Replies
View Related
Jun 2, 2011
I've been for a while trying to configure my apache to host 5 domains as virtualhosts in the same IP address, but seems that neither one makes it through... it always takes first one, because it is the default:
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin xxxxxxx@xxxx.net
[code]....
As you can see I tried the ServerName with the http://, in quotes, without it...
View 11 Replies
View Related
Feb 22, 2011
I am trying to run two web servers (Virtual Hosts) on a single Linux Centos 5.5 box with a single IP address 192.168.0.182. I did all the pre-installation requirements such yum install mysql, yum install mysqladmin, service httpd start, service mysqld start etc etc.In /var/www/html directory, I have two folder called server1 and server2. These two folders have the necessary web server php script files and folders. I opened the browser and managed to install the script on one web server successfully. When I put the IP address 192.168.0.182 on the browser address bar, the page loads without any problem. Now I would like to be able to install the other web server script and I don't know how to?Here is my httpd configuration;
<VirtualHost *>
DocumentRoot /var/www/html/server1
ServerName development.mysite.com
[code]....
View 15 Replies
View Related
Jul 29, 2010
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
View 1 Replies
View Related
May 22, 2011
Does anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
View 7 Replies
View Related
Dec 7, 2010
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
View 6 Replies
View Related
May 8, 2010
I installed LAMP server at my debian lenny. people can't view my webpage via my ip address. How to active my ip address?
View 4 Replies
View Related
Mar 6, 2011
I would like to add ROR to my web server, but I would still like to keep php. I tried doing this a few days ago, but it made my PHP unusable so that it would ask me to download a file rather than displaying the php page. how to install ruby on rails without trashing my system again.
View 3 Replies
View Related
Jul 27, 2010
We need to set up Apache 1.3.41 and php4 on a server since our other server just broke down.. and our current code is not compatible with apache2 and php5. I have the source files of Apache 1.3.41 and of php4. I do not have any problems in setting up php4 but, after setting up apache2 it gives me that i have successfully built Apache 1.3. But when i try to start it through apachectl it gives some errors like
Code:
Syntax error on line 329 of /usr/local/apache/conf/httpd.conf:
Invalid command 'Order', perhaps mis-spelled or defined by a module not included in the server configuration
[code]....
View 2 Replies
View Related
Mar 17, 2010
I'm using comcast, and I setup my server, everything works fine.But later I found out that the server inet address is changing everyday, and it makes my server almost not accessible.Is there anyway to fix that problem??
View 5 Replies
View Related
Sep 25, 2010
I have 4 servers that I got at auction and they now have ubuntu running with gnome interface.I installed apache2 and tried to edit the conf file but i am not sure if it is a router issue a dns or the config.I am trying to figure out how to set the server to hold the domain from a dynamic ip address and also how to create some test page to see if i can acess from the internet.
I have purchased some books on the command lines and how ubuntu works, I am understanding it so far, but dont know how to have a directory for the dns request to point to for the sitewhat i want to do with the servers...voipeb server for about 4 websites - one is for a volunteer rescue organization, another for a test auction site and 2 portfolio sitesremote file access- if possiblealso on a side note, is it possible to have a message relay from one cell phone or transmit to the server and have it send sms message to cell phones? - this will be used for the rescue group as well.
View 3 Replies
View Related
Nov 6, 2010
Is there a way to synchronize the address book in Outlook when the user works on multiple windows computer, and the server in the internal network runs under Linux ?
View 1 Replies
View Related
Sep 26, 2009
I have installed Fedora 11 and I have set it up as a web server with Apache. I have a domain name from GoDaddy that I own and I have set it to my web server. I am able to type the address into a browser on a computer outside of my network and it will pull up the web pages on the server. the problem that I am having is that after I type the URL, it gets replaced with the IP address. [URL] I know that I need a nameserver to resolve the IP address but I can not figure out how to do it. I have tried to use Bind but I can never seem to get it to work.
View 3 Replies
View Related
Jan 28, 2010
I have it set up so when I go to URL... it shows my server. I'm not sure how I can make it viewable to everyone though.
View 3 Replies
View Related
Apr 6, 2010
My apache server don't want to start by itself on boot.
View 9 Replies
View Related
Sep 1, 2011
I am currently trying to upgrade the Apache installation on our server from v2.2.14 to v2.2.19 using:
[URL] as a guide.
Unfortunately I seem to have hit some walls. When trying to execute ./config.nice I get the following error:
./config.nice: 33: /build/buildd/apache2-2.2.14/configure: not found
Google have not yielded any results as yet. If I leave out this step and use configure, make and make install, v2.2.19 gets installed, but to a different directory and all the config will need to be reformatted as it seems it does not use the Ubuntu Apache config structure.
View 5 Replies
View Related
Mar 2, 2009
I am trying to get the MX record using dig command supplying IPv6 address of host. but i am getting connection timed out .
while with IPv4 address and host-name its working fine.
View 1 Replies
View Related
Jun 6, 2010
bit of a server noob having built a server to hold a php website for a client hosting at home, I have some experience, but VERY limited and don't speak fluent server.My problem is that overnight each day apache on my clients server stops responding. I can still access via putty / webmin.The best I can see it, it seems that apache 2 opens too many child processes and chokes the system. My reasoning for this is:-Though I have max child set to 20 with a keep alive of 30 there are dozens of child processes 'apache2 -k start' running, some of which were started 9.5 hours ago.
-I can stop apache, though that doesn't kill these child processes. I can terminate the parent process which does kill the child processes, however restarting apache after killing the child processes results in a system crash. Rebooting the server remotely after apache has stopped responding also results in a server crash. That is NO response on any port.I would be happy to display any pertinent server config/logs etc if anyone can help me troubleshoot this?
View 2 Replies
View Related
Dec 8, 2010
A week ago I purchased an VPS. The first few days I was having trouble to set up an outgoing connection on the VPS. Eventually it turned out to be some misconfiguration of the server where the VPS is hosted on.Since then I have installed the apache server, but I'm still not able to access the apache server from an external computer. I already have contacted the provider, but they haven't replied yet. To speed things up I was hoping someone could check my configuration to be sure nothing is wrong with it.To be sure I posted all configuration and information that I think would be important. Please contact me if you need more information.
View 2 Replies
View Related
May 5, 2011
I have a problem with my Terminal Server Client, I cannot seem to connect to any windows server via IP address. Can anyone please recommend any tool I could use to connect? I need to work on the server for admin interfaces example Admin Kits for workspace protection
View 9 Replies
View Related
Apr 20, 2010
I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
View 3 Replies
View Related
Sep 6, 2010
So if I disable apache 2 my ngnix server will serve the files in /var/www automatically.
View 1 Replies
View Related
Jul 11, 2011
I'm working on a side project where I would like to install three ubuntu server systems,each with only one task.So server0 would be the apache server, server1 would be the database and server2 would be the file server.which key terms I should be researching?
View 9 Replies
View Related
Sep 20, 2010
I have a web server in my kitchen with apache running on it. Since the upload speed is quite low due to my isp I would like to execute a bash script that uploads a file to another server through a website (which is htaccess protected) The idea in general: Someone with access to my website browses through a folder, copies a file path to an input form and presses "upload". Rather than executing a bash script directly I could have a cron job running in background that finds the path and then uploads the file to the other server I have userspace on and is accessible via sftp/ssh. The file would be than erased later after a couple of days or so. That person would be able to access the file with higher speed some time later without logging in via ssh and doing all that manually.
View 2 Replies
View Related
Jul 9, 2009
I'm running an Apache web server version 2.2.11 on Fedora 10. I'm trying to get it to run a PERL cgi script but with only partial success. The script uses the PERL cgi package.
The perl script is a simple test case that creates a form to fill in. Once the submit button has been clicked it should then return the data submitted. The perl script writes this to a file called output.cgi
The intial script located in /var/www/cgi-bin/index.cgi gets executed fine when I go to [URL], this works with no probs. However once I hit the button to submit the data I then get the error
Not Found
The requested URL /cgi-bin/output.cgi was not found on this server. Apache/2.2.11 (Fedora) Server at localhost Port 80 Im not sure if its a perl problem or server setup problem, theres probably a simple switch or something but Im out of ideas at the moment.
View 6 Replies
View Related
Apr 19, 2011
I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
View 2 Replies
View Related
Jul 20, 2011
what is Production IP address and Management IP address in Linux servers? What is the significance of these two? When to use what?
View 3 Replies
View Related
