Ubuntu Networking :: Rebuild The Package For Install?

Aug 17, 2010

I found a post here somewhere detailing the steps to make wpa supplicant work with EAP-FAST, however the steps appear to be old.

I was able to patch openssl using the openssl-tls patch supplied with wpa supplicant package, however when I try to rebuild the package for install, it fails quite horribly.

is there a known good set of instructions for 10.4 and how to get eap-fast working using an anonymous supplied PAC?

I'd really like to convert my HP laptop over to ubuntu, but unless I can get my corporate wireless functioning, I won't be able to.

View 1 Replies


ADVERTISEMENT

Fedora :: Package List Doesn't Automatically Rebuild?

Aug 24, 2010

I get the following error message when I try to access all of the sections in Add/Remove Sofware;

"No package cache is available. The package list needs to be rebuilt. This should have been done by the backend automatically

failed to search names: failure: repodata/5374141db0e227497be1e7ced5f1c45dafbe2f1899874f961f 7c54478b112bb9-primary.sqlite.bz2 from updates: [Errno 256] No more mirrors to try[

View 4 Replies View Related

Fedora :: Rebuild: Cannot Rebuild From Current State

Nov 21, 2010

When trying to rebuild a RAID1 on a FastTrak TX4310 controller after a disk was replaced the below message is given:

Code:
[root@SAMBA Samba]# dmraid -R pdc_gigcjhdfa /dev/sdc
Volume "pdc_gigcjhdfa" is not in rebuild state (current: 16)

Rebuild: cannot rebuild from current state!

View 4 Replies View Related

Ubuntu Networking :: Rebuild Ufw Rules After Flushing Iptables?

Jul 20, 2010

How do I get ufw to refresh firewall rules after accidentally running iptables -F

View 3 Replies View Related

CentOS 5 Networking :: Network Bridging MAC Conflicts In KVM After System Rebuild?

Mar 24, 2011

After restoring from a hardware failure, I cannot get bridging to work again. I reinstalled the host version 5.5, and copied the .img file back onto the rebuilt machine. I also had the network scripts and iptables backed up. Through virt-manager I re-attached the virtual machine, and when I boot it, I get a MAC address conflict on the vm's eth0; "Device eth0 has a different MAC address than expected". The vm had a static ip address.

[root@trngvh ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
HWADDR=00:24:81:E4:FC:02

[code]....

View 10 Replies View Related

Ubuntu Networking :: Trying To Install Aircrack-ng Through Package Manager Not Working

Jan 29, 2010

I just installed ubuntu 9 and I went to package manager to install aircrack-ng version 1:1.0-1 and it says that it has installed but then when i go to applications/internet/aircrack is not shown.

View 1 Replies View Related

Ubuntu Networking :: Can't Install Network-manager-pptp Package?

Mar 12, 2010

i can't install network-manager-pptp package with offline.i get this package from Code:http://packages.ubuntu.com/karmic/i386/network-manager-pptp/downloadJust now i use ubuntu9.10.

View 3 Replies View Related

Fedora Networking :: Install Ndiswrapper In 10 But The Package Is Not Found

Jun 23, 2009

I'm trying to install ndiswrapper in Fedora 10, but the package is not found:

[Code]...

View 1 Replies View Related

Networking :: Apt-get Install Always Returns - Couldn't Find Package

Sep 16, 2010

Debian linux:

I've tried apt-get install with the following packages:

And others and always get 'Couldn't find package'.

I tried doing an apt-get update and that worked without problem.

View 11 Replies View Related

Ubuntu :: Install A .bin Package With Synaptic Package Manager?

Oct 2, 2010

I want to install CmapTools in my desktop, which runs v.10.04. I have downloaded the .bin file from their site.Is there a way to install it using Synaptic Package Manager?

View 2 Replies View Related

Software :: Compile And Install Xmonad Package By Package?

Jul 28, 2011

I originally attempted to compile and install xmonad package by package, and the end result was this:

Code:
$ xmonad /home/adx/.xmonad/xmonad-x86_64-linux: executeFile: does not exist (No such file or directory)
X Error of failed request: BadAccess (attempt to access private resource denied) Major opcode of failed request: 2 (X_ChangeWindowAttributes) Serial number of failed request: 7 Current serial number in output stream: 8 I figured I left out a flag on the make file or something, so I tried the slackbuild packages next; however, the same error was present at launch.

View 1 Replies View Related

Fedora :: Download And Install A Package (zip Package)

Mar 15, 2009

Sometimes i have on some magazines or Internet Zip packages that are the answer of what i am looking for.


Wich tool and how can i do it? c Well, i am in position to say that i had downloaded from Internet or located the package in the Cd or DVD that comes with the magazine.

But now comes the big question. How can i put this package ( install) on my distro ???

Do i have to be a normal user or should it be root or su (superuser) ?

The packages that come with the distro is easy, because i select them and everything is done

As i told before, maybe this is a silly question, but i simple don't know how to install them and i need some of them to leave MS for good.

View 13 Replies View Related

Fedora :: Install *.tar.gz Package Package After Extraction?

Feb 6, 2010

Fedora 12 64bit. Is there an easy and reliable way to install *.tar.gz package after extraction? Instead of going through ./configure etc.

View 6 Replies View Related

Ubuntu :: How To Rebuild Apt Index

Jan 1, 2010

I recently did a very stupid thing:

Code:
sudo rm -f /var/log Now I cannot update or upgrade any package (I know there are updates waiting but Update Manager doesn't show any packages to download). How can I rebuild the index of packages and its versions in /var/log/apt ?

View 2 Replies View Related

Ubuntu :: How To Rebuild /boot

Jul 22, 2010

I've lost the disk that contained the /boot directory of a 9.10 installation.All other important partitions/directories are on a raid0 and working ok.So, I started trying to repair the system by booting from Ubuntu 9.10 live cd, creating a new partition on a new disk for /boot, mounting all partitions in its place for a chroot environment, doing the chroot, and then trying several reinstalls of packages which I supposed where enough for rebuilding /boot (linux kernel & grub), then I ran something like grub-setup which installed a new MBR on the new disk.Everything went ok, but when I reboot the new installation it gets me to a text mode login screen and of course I want to recover the previous configuration which ran gdm and auto login into GNOME I had before.After that I tried reinstalling some other packages like gdm but now the boot process "hangs" on the boot splash screen.

View 1 Replies View Related

Red Hat :: Kickstart Install: "This Package Does Not Exist" After Setting Up The Package

May 24, 2011

I'm updating a working kickstart configuration.Got a good iso from it the last time used.I simply want to add 2 rpms to the installation. So I added the rpms (libganglia & libconfuse) into the ../Server directory. I added those two names to the %packages section in the .cfg file. And I added those two names into two new appropriate lines in the ../Server/repodata/comps.xml file.

I ran "createrepo -g repodata/comps.xml ." from the ../Server (rpms) directory. I then ran my "mkisofs" without issue, and used the resulting .iso. The message I get during installation is "You have specified the package 'libganglia' should be installed. This package does not exist. Would you like to continue or abort your installation?". I've tried several variations of the createrepo command.

View 3 Replies View Related

Ubuntu :: Banshee Keeps Asking To Rebuild Database

Aug 25, 2010

I am trying to use Banshee to sync my 5th generation iPod nano on a Lenovo laptop. When I plug the iPod in, it is recognized just fine by Banshee, however when I click on the iPod icon it tells me that it is unable to read the iPod because it has been used with a version of iTunes that saves a version of the database that Banshee can't recognize.

All of this is fine. I click on rebuild iPod database since I have no intention of using iTunes in the future with this iPod, and I don't mind losing the playlists or songs on the iPod (I have them all on the computer). The database rebuilds normally from all appearances, and after a short time I am able to read all songs on the iPod and transfer things back and forth.

The frustration comes into play with the fact that next time I load up the iPod on Banshee, it asks for the exact same process. It is unable to read the iPod, needs to rewrite the database, etc..

Is there some way to permanently alter the database that I'm missing, or is this an issue with 5th generation compatibility?

View 6 Replies View Related

Ubuntu :: Trying To Rebuild Encrypted Home Directory

May 21, 2010

I ran fsck on the wrong partition (which was mounted) and in my haste blew up the file system on that partition. Now here's the kicker, I had 450Gb of data and documents on that partition that was in an encrypted home directory. So the long and the short of it I ran fsck again and I was able to recover all the files, and they are now residing on a Lost+Found folder on my hard drive.I have located the encrypted files, but I don't know what to do with them.

View 1 Replies View Related

Fedora :: How To Rebuild Kernel To 2.6.31.5

Dec 16, 2010

I have been using F12 for while now, I had applied update when it available. After the latest update, my laptop have lot of Kernel Crash error and it hang up more often. I try to upgrade to the F13 or F14 but not successful at all. My only hope now is to rebuild the Kernel to the early Kernel. How to rebuild the Kernel to 2.6.31.5.
My current Kernel is 2.6.32.26-175.fc12.i686.PAE
Gnome 2.28.2
1G memory
Intel PIII mobile 1.13G

View 2 Replies View Related

General :: How To Rebuild A Kernel

Apr 29, 2010

I have backtrack 4 on vmware player... i have intel (R) wifi 5100 agn wireless card and when i type airmon-ng there is nothing shown on interface....it's empty... i downloaded a driver from here [URL] and i have been told i need kernel rebuild... i have kernel 2.6.30.9 so how can rebuild it?

View 8 Replies View Related

CentOS 5 :: Rebuild The 2.6.18.-128.e15 Kernel In 5.3?

Jul 18, 2009

I want rebuild my 2.6.18.-128.e15 kernel in CentOS 5.3? but i have one trouble. When i type make bzImage I see

make[1]: *** No rule to make target `init/main.o', needed by `init/built-in.o'. Stop.
make: *** [init] Error 2

on the screen. It is because kernel sourse codes are not full. I can not search full sourse codes of 2.6.18.-128.e15 kernel.not in src.rpm , not in tar.bz2 etc.

View 5 Replies View Related

Ubuntu :: Grub Menu Is Basically Empty And Cant Rebuild It?

Apr 23, 2010

So basically this happened: i have 9.10 on my dual boot machine (ubuntu WinXP) and did a package update 2 days ago for the first time in 3 months. Kernel .21 was installed after having .17

Dont know if this part had anything to do but ill tell you anyway: during the update the computer (ibm Thinkpad x31) froze. After restart i did "dpkg --reconfigure -a" or something similar that apt-get told me to do.

now after rebooting the Grub2menu does not list any OSes... only a Memtest entry. i rebooted using

Code:
grub> linux (hd0,7)/boot/vmlinuz-2.6.27-9-generic root=/dev/sda7
grub> initrd (hd0,7)/boot/initrd.img-2.6.27-9-generic
grub> boot
and did

[Code]...

View 3 Replies View Related

Ubuntu Servers :: RAID6 Rebuild - Drives Got Out Of Sync?

May 16, 2010

I have a 12 disk raid 6 Array with 2 additional spare drives. Two of the drives got out of sync (because I was fat fingering the mdadm commands while trying to reassemble the array), so I added them back as spares. This is what mdadm is showing me:

[Code]...

View 1 Replies View Related

Ubuntu :: Rebuild Partition Table Or Create RAW File?

Jul 12, 2010

I need to be able to access the files on the image of a hard drive created with ddrescue. The original drive had bad, unreadable sectors, and was corrupted in a way that damaged the partition table. It was formatted NTFS, but because of the corrupted partition table, nothing recognizes it as such anymore. Is there some other way I can mount it, rebuild the partition table or create a RAW file tree out of the image file?

View 6 Replies View Related

Ubuntu :: Rebuild Directory Structure And Recover Files?

Sep 2, 2010

I have a drive with an NTFS partition where all the files were deleted. What I'm looking for is a way to rebuild the directory structure and recover the files. I really, really want the directory structure as the partition contains 460 Gigs of data. Normally I would use the tools here: [URL] but I've never dealt with this much data before. Everything there that I've used creates a pretty messy dump however.

I have used ntfsundelete before but only for a few files at a time. I have no idea what would happen if I tried to run it on a partition of that size. I'm comfortable with data recovery but this amount of data is beyond me. I've run ntfsundelete with no args and from what I can tell of skimming the pages of output all the files are fine. The partition has not been written to.

View 4 Replies View Related

Ubuntu :: Rebuild Md RAID Array After OS Disk Failure?

Dec 19, 2010

I went to setup my linux box and found that the OS drive had finally died. It was an extremely old WD raptor drive in a hot box full of drives so it was really only a matter of time before it just quit on me. Normally this wouldn't be such a big deal however I had just recently constructed an md RAID5 array of 3 1TB disks to act as an NFS mount for basically all of my important files. Maybe 2-3 weeks before the failure I had finished moving all of my most important stuff onto that array. Now I know that the array is intact. All the required data is sitting on those disks. Since only the OS level disk failed on me I should be able to get a new disk in there, reinstall ubuntu and then rebuild that array. how exactly do I go about doing that with mdadm? Do I create the array from the /dev character devices like when I initially built the array?

View 2 Replies View Related

Ubuntu :: Server Was Used To Boot (after MDADM Raid Rebuild)

Feb 1, 2011

My home-backup server, with 8*2TB disks won't boot anymore. Two disks failed at the same time and i rebuilt the raid 6 array without any problem, but now i can't boot the os. I'm using ubuntu server, 10.10. I've made screens of the displays to don't copy everything here. The problem at the boot:

And the Grub config: It's not a production server, but i would like to have it online. I've tried for the lasts 2 days (just a couple hours a day) but without success. I was suggested to do "mount -o remount,rw /" and than edit /etc/fstab, but it get the file don't exist error.

View 2 Replies View Related

Ubuntu Servers :: Rebuild Raid5 Array After Every Restart?

Jul 8, 2011

I have software raid 5 array, each time I reboot my server, I have to rebuild array again. Rebuilding array takes too long. I am using ubuntu server 10.10.

View 7 Replies View Related

Ubuntu :: Way Using Apt-get, Dpkg Or Similar To Rebuild These Subdirectories In /usr/share/doc?

Jul 28, 2011

I'm not a complete newbie in Linux, but I was working some years solely with Windows. But some weeks ago I remembered my old love and installed Ubuntu Natty 64 bit. Last night I installed also Oracle 11gR2 64 and got it finally running after some fights with missing packets and unexpectedly placed libs. (Unexpected by Oracle installer). Nevertheless; Oracle is running now.Ok so far. This is the good news. The bad news: In one of these fights I was in a terminal-session and accidentally entered sudo rm -r /usr/share/doc while I wanted to delete /usr/share/doc/libstdc++5. I wondered why this takes so long time and stopped it as I saw what I did. But too late of course, there are many subdirectories missing.My question now: Is there a way using apt-get, dpkg or similar to rebuild these subdirectories in /usr/share/doc?Natty is still running fine for now. But what happens if there are updates or new packets?

View 6 Replies View Related

Fedora :: Mass Rebuild Of Srpms ?

Sep 5, 2011

Does anyone know of a way to do a mass build of srpms? For example if I wanted to build loads of packages but with different default installation paths or compiler flags. Are there any tools to do this?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved