I have F15 and use networkmanager to connect to wifi networks. How do I edit the list of saved wireless networks that it tries to automatically connect to? I need to get rid of some networks that it is always trying to connect to.
View 2 Replies
does it still support the madwifi driver. i have tried to compile madwifi 0.94 that i got from svn and from sourceforge and it was succes, but the problem is it doesnt work. when i compile the source from subversion, i get the ath0 on iwconfig command but i can't get any wireless network on list of network. if i use the one from sourceforge, the iwconfig list even doesnt contain any ath*
View 3 Replies View RelatedI accidentally clicked on a wireless network once and now every time I boot up, it tries to connect to that network and asks for the password. I have to keep pressing cancel and then it connects to my regular network.
I tried fiddling around with the network settings but I couldn't see any place where I could remove that network from the 'List of preferred networks' or at least try to prevent it from connecting automatically.
How to remove this network from the list of preferred networks? Edit some file somewhere maybe?
I want to add a user that can connect to wireless networks, use all the video and audio stuff etcetera.
i know to use the User and Group management application for that. but how do i enable their use of the wifi, video and audio stuff please?
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
View 4 Replies View RelatedI've Vaio P39 with Karmic 9.10(2.6.31.21). Everything is ok excluding the WWAN. It just is missing in available networks list to connect (LAN and WiFi are ok).
Searching gives that WWAN adapter doesn't start at cold reboot and it's proposed to use Win7 to switching WWAN on and then restart. But it looks like - must have Win7 only to switching WWAN on...This kind of solution for some Vaio laptops
Code:
Probably bad searching from my side but I've no solution yet. Does it exist at all?
My wireless network doesn't work. I get no list of broadcasting networks. I have runned 'collectHWData.sh'. This is the output. Does anyone know what I should do to make my wireless work? The problem occurs on my clean installation of SuSe 11.3 on my laptop PC C500 Compaq.
Code:
collectNWData.sh V0.6.5.4.1 (Rev: 1.282, Build: 2011/01/25 19:33:38 UTC)
!!! CND0470I: Reduced analysis capability and less network information because script was
[code]...
Is there a way I can refresh the list of available wireless networks in the network manager applet? It works correctly when I've just booted but doesn't after I resume after suspending. There's just a message like "wireless networks not available".
I can assure you that the wi-fi is not disabled using a button (my laptop doesn't have such a button), "Fn" key combination or in any other way and the network doesn't go down when I need it.
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
I've got my Lenovo T60 laptop wireless running without too much trouble, the only problem is when i close my laptop lid and open it again the wirelessconnection is down and i simply cant click on the network icon in the notification area to re-connect as wlan0 is inactive. If i go to System>admin>network i cant activate the interface either as the 'active' button is greyed out, the only way to get the thing to come alive again (other than a full reboot) is to toggle the wireless switch on my laptop off and then back on.Not sure this should be required, i've got the interface configured to start automatically but it doesnt seem to care.
View 4 Replies View RelatedI just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I'm running fedora 13 but I'm having issues with the wireless connection, I can see all the networks in the area but when I try to connect it does not seem to accept the wep key.Its a Belkin receiver, could do with a little help as this is such a pain. I'm using a pc.---------- Post added at 05:24 AM GMT ---------- Previous post was at 04:59 AM GMT ----------This maybe some use but I don't know much about it.
[Barry@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:8B:90:19:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
just downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?
View 4 Replies View RelatedI am fairly new to linux, I getting to grips with the offline and I am starting to be converted. The major problem I have is that I cannot get it to connect to my wireless network. I am using Fedora and my wireless card is the Belkin Wireless G Desktop Network Card - F5D7000uk (version 3000uk).
I am able to see the network and pick up the essid automatically through networkmanager or iwlist scan. I have tried to connect using Network manager:
- it picks up the information and I submit my WEP key and the icon top right shows two green dots with a blue flame(?) rotating between them for a few minutes before asking for my key again.
And using the terminal commands.
Code:
$ sudo iwconfig wlan0 mode managed
$ sudo iwconfig wlan0 essid "BTHomeHub3-12GT"
$ sudo iwconfig wlan0 key 563865428
then tried to test the connection using
Code:
$ sudo ping www.bbc.co.uk
ping: unknown host www.bbc.co.uk
Code:
sudo iwconfig wlan0
wlan0
IEEE 802.11bg ESSID:"BTHomeHub3-12GT"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management: off
Link Quality: 0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I've got Debian wheezy running on my Lenovo Thinkpad X220.Kernel is 2.6.38 with compat-wireless modules.Trying to connect with an wireless network fails every time -even on unsecured networks.
dmesg output:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to xx:xx:xx:xx:xx:xx (try 1/3)
[code]...
Well the thing is i cannot connect to a wireless network, when i log in the nm-applet won't show, if i wait about 20 minutes it will show .. and if i clicked on it requires a password, when i enter the password it freezes!! i tried uninstalling the nm-applet and reinstalling it, didnt work
View 5 Replies View RelatedWhile staying at a hotel that offered wireless Internet connection connection I was not able to access their network. I contacted their technical support 800 number and was told that the north building server had been down for 26 hours. I moved to a south builing room. Same problem. I went to McDonald's, which had wi-fi connection. Same thing. My laptop was not able to make a connection.
My question is as follow:
How do I find out:
1) whether it is a problem with my new Ubuntu version (10.04)?
2) my wireless card in my laptop is no longer working? Are there any tests that I can run?
I am a (somewhat) newbie to Linux (but have an extensive Windows background), and I have just installed Debian Squeeze in an old EeePc 701 4G using the netinst version only with the following packages:
eeepc-acpi-scripts
x-window-manager
gnome-session
gdm
gnome-themes
gnome-themes-extra
plymouth
bridge-utils
Now I would like to install Debian in my main laptop, but I think it won't be able to connect to any wireless networks during setup and before installing firmware-brcm80211 and wireless-tools (its wireless card is a Broadcom 43224AG). That being, and to avoid connecting the computer directly to the router (it is not easy), I would like to bridge the EeePc's wireless connection to my laptop using a cable. I tried using the instructions found at the Debian Wiki, but I couldn't set it up properly.
I installed Debian sid recently. I installed the B43 driver and wireless is working just fine at home and elsewhere. I can't connect to the wireless networks at school though. There are two networks, one is unsecured (and you have to enter your login details after connecting - I can't connect at all though), the other is secured. I was previously using Ubuntu, with network manager, and I have all my settings the same for the secured network as I did in Ubuntu. In Ubuntu I can connect to both networks just fine. In Debian I can't.
View 7 Replies View RelatedSince my update to OpenSuse 11.2 knetworkmanager refuses to connect to WEP enabled networks (worked fine with knetworkmanager 11.1). I am sure that I use the correct password and I tried on 3 different networks. The manager is connecting to open networks and WAP protected networks without problems. I saw on other forums that there were similar problems with previous versions of networkmanager. But I could not find a solution for my problem.
View 9 Replies View RelatedI just installed OpenSuSE 11.3 x86_64, and as I'm new to OpenSuSE I can't get my wireless to work. I believe it should work because it worked out of the box in Ubuntu (9.10 and 10.04)
At first I didn't see any network icon in the notification area, but after some googling figured out to enable NetworkManager instead of ifup. Now there is an icon, and clicking it I can see wireless networks, but when I try to connect it tries for a while, then seems to give up.
/sbin/lspci gives
Code:
Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter PCI-Express) (rev 01)
/sbin/lspci -n gives
Code:
168c:002a (rev 01)
[Code].....
I have brought my son a samsung n150 mini laptop. It has a "realtek rtl8192e wireless lan 802.11n pci-e nic" card fitted to it. I have tried downloading the drivers from samsung and realtek, but still can't get it to connect. It see's the local connections but when i try to connect it says it is unable to.
View 1 Replies View RelatedI have a machine running Xubuntu [2.6.22-14-generic]. I have been trying to get this machine connected to wireless for ages, and I'm having another stab at it. So far I have install ndiswrapper and loaded the driver for a Linksys wireless adapter. The output of 'ndiswrapper -l' reports:
Code:
wusb11v4 : driver installed
devoce (13B1: 000B) present
So as far as my newbie knowledge goes, I believe that step to be completed, correct?When I turn on the machine is type in
Code:
sudo sh
modprobe ndiswrapper
to get the card running to where it will appear in the iwconfig dialog.The commands 'iwlist wlan0 scan' will list all the wireless networks around me, but I have been un-able to connect to any network, even unencrypted ones. I have tried to connect both through Wicd and command-line to no avail. For command-line I have used:
Code:
sudo ifconfig wlan0 down
sudo dhclient -r wlan0
sudo ifconfig wlan0 up
[code]....
With the final 'dhclient wlan0' commands, the following is returned:
Code:
There is already a pid file /var/run/dhclient.pid with pid 134519120
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium
[code].....
I have attempted to go ahead a step further and connect to an encrypted wireless network, however, I receive the same message, as well as another error message upon trying to enter the key, with the following code:
Code:
iwconfig wlan0 key s:"thekey"
Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument.
I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.
View 2 Replies View RelatedI have a WLAN Driver Azure Wave AW-NU222 Wireless LAN Card in my Medion computer.
After installing Ubuntu it seems to detect the wireless networks in my area. However, when I try to connect to my network, it tries for several minutes and then times out with no error message. I have set up the credentials and also tried removing the encryption (WPA-PSK) from the network itself, but it still doesn't connect.
Connect via an Ethernet cable is fine, and I know that the network is good because I can connect via my Windows Laptop and various other wireless devices.
I suspect it's due to drivers, but I'm having trouble downloading a driver which I can try and install using Ndiswrapper. The Medion website just a windows executable when I try and download the driver specific to my machine when I really need the .inf file.
Here is a situation I have never come across (though I have only been using linux since 2004).I am running ubuntu 10.04 and using Wicd Network Manager.I can connect to my WPA encrypted home network, but if I go to my coffee shop to use their unencrypted wifi - I cannot.Even using the terminal. I think it is the way the device sees the network - but I don't know how to fix it.I have a screenshot with wicd here:And one with connecting to the essid here:Afterwhich, dhclient was unable to obtain an ipaddress - just like wicd above.
My iphone connected to this network easily without encryption or needing to use the browser to authenticate, etc.Any ideas on how to fix this?Specs:Samsung NC10lspci:
Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[code]....
I have a HP Mini1000 and recently switched over to Ubuntu. I followed the directions found here:[URL] However, I still cannot connect to wireless networks though my card seems to be scanning for them and finding them. I have tried connecting to open networks and ones that require authentication.
View 1 Replies View RelatedGot Ubuntu 11.4 installed on my Lenovo Thinkpad X220.Except very very rare cases i'm not able to establish awlan connection.Scanning is possible at all times, monitor mode works as well.Network Controler (lspci)
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
[code]....
So I was the one who couldn't get their ethernet port to function properly. Most likely, this was the result of bad hardware since none of the community's suggestions for software fixes did anything. I believe this is probably true.Indeed, when I bought a cheap $10 wireless USB dongle, it immediately worked better than all the previous things. It detected networks, displayed network strength and even allowed me to attempt login.
The only problem now seems to be that it cannot login. I've rechecked the password countless times, but it just shows the 'connecting to wireless' animation for a minute or two and then poops out and says, 'disconnected'.I assume if everything is getting me this far, the driver is not the problem with the device. Is this a safe assumption?
I installed wheezy on my Acer Aspire One netbook and am unable to connect to wireless networks.Output of lspci shows this as my wireless card:
Quote:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I installed the firmware-atheros package to get the card up and running. Output of iwconfig shows I have a working interface:Quote:
root@netbook:/home/eric/Desktop# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
[Code]...
