Fedora Networking :: Make The Internet Go Through The Firewall To Network
May 14, 2011
I am new with IP tables stuff and i have a problem....i have a pc Contain a fedora OS and i want to make a small network (4 PCs Contain XP OS) and using the pc of fedora OS as a firewall i want to Prevent the ping (i think it called(ICMP)) in the privat network and prevent one of the PCs from Browsing internet(prevent port 80 and 81 as i think) and i still don't know how to make the internet go Through the firewall to the private network...
Note: WAN = eth0
LAN = eth1
View 1 Replies
ADVERTISEMENT
Aug 8, 2009
I want to write a custom rule to allow all connections to the ip addresses on my local network (192.168.2.2 through ...99) but I don't know how. I know adding a custom rule asks me to read a file and put it in "iptables" format, but I don't know how...
View 5 Replies
View Related
Jun 3, 2011
I'm working on setting up access for our developer via Telnet, we are on a local network behind a physical firewall. I set up the standard Telnet service for Fedora15 and from localhost I can login via any user and root.... However I cannot login from another terminal on the LAN, even though I can ping and FTP to the fedora15 box. I added the firewall rules for telnet, that did not work, so I disabled the firewall, still cannot get a connection via port 25. I feel either port 25 is closed in another manor or the telnet is restricted to the localhost.
Also I cannot login to root to configure the Firewall Desktop GUI, only standard users, is this an issue? I also cannot login to the console as root even though I use the correct password.I can only su to root and sometimes it is a PITA. There must be some settings to clear these issues up...
View 2 Replies
View Related
Mar 6, 2011
i have two questions and thought that anyone here could have the answers.first things first,i want to make firewall accept a range of ports (say 8000:9000) because im using mpd process manager to make some parallel processing, does anyone know the command that satisfy this?
the second thing is, when i open a range of ports like that, it would put my system at risk if some bad guys somehow identifies this range, is there is anything that solves that matter(i.e. makes the firewall monitor the packet, if its an mpd accept if not drop)
View 4 Replies
View Related
Aug 7, 2010
I can not connect to internet using Fedora 9. But I can connect using Windows XP on the same machine. I have a ADSL modem & the modem is connected to the Ethernet Port of my Computer.
View 3 Replies
View Related
Feb 19, 2009
How to make internet sharing in Fedora with two inputs & one output.
View 14 Replies
View Related
Jul 6, 2010
When I enable my ufw it completely shuts me out and I have no internet connection. When I do:
Code:
sudo ufw status numbered
I get:
Status: active
To Action From
-- ------ ----
[ 1] 80 ALLOW IN Anywhere
[ 2] 80 ALLOW OUT Anywhere (out)
But I need to disable my ufw in order to reconnect back to the internet. Why is that? Doesn't the above rules indicate that I should have inbound and outbound traffic even if my firewall is up?
View 5 Replies
View Related
Feb 11, 2010
I want to make make my fedora machine access-able over the internet. I want to assign IPV4 address to this machine( I already have one IP address ) which can be used for this. What configuration changes I need to make in fedora to make it accessable to the external world
View 6 Replies
View Related
Jun 4, 2010
I greet you at the same time ask me to help with a problem I have and I could not solve. Within the requirements I have is to connect a network that is connected by VPN to my LAN.The detail is I could have connection to the network by adding a network card (eth3) on the firewall and connect to the VPN router (DLINK) cable network, but I can not reach the other estin that are in the VPN.
It should be noted if I add a station within the network: 10.30.1.X/24 has no problems connecting with the other destinations.Physically this router is inside my 10.30.1.X DATA CENTER another wan.
View 1 Replies
View Related
Jan 26, 2010
I already have Linux Enterprise 5 system installed with some server packages such as Webmin, Active Directory, Web Server which also act as Internet gateway. Now I want to add firewall functionality to block clients ip accessing internet.
View 14 Replies
View Related
Jun 15, 2009
I've worked with Fedora 10 for quite a time, with no problems regarding network or internet.Now that I've upgraded to Fedora 11, nothing regarding networking works. I have a dual LAN nVidia controlled network card. I've tried every possible network setting (dhcp, local only, etc...) and also tried to connect 2 pc's via direct connection, all without a result.
When I activate dhcp (as I normally would do/did), fedora tries to connect (with this blue balls spinning next to the clock), but then after a while, I just says that the network doesn't connect (the little red cross over the network connection).If I try to enter the ip, gateway, etc... manually, it says that I'm connected, but I can't ping0find any other computer or router.
View 2 Replies
View Related
Mar 25, 2011
I suspect this is an initial configuration bug. All firewall logs seem to be going to all
three files. That causes a lot of clutter in the log files, and makes it difficult to see whether there are any serious problems being logged.
View 9 Replies
View Related
Jan 14, 2011
is this possible on 2 Linux boxes will act as a INTERNET Firewall + Filtering: 1st PC = CENTOS 5.5 functions as a firewall using iptables with two NICS 1=ETH0 connected to internet with a public ip and 1=ETH1 with ip address of 10.0.0.1 connected to the 2nd PC Centos 5.5 with squid/dansguardian with ip address of 10.0.0.2
2nd PC = Centos 5.5 functions as a squid + dansguardian internet filtering with 2 NICS 1=ETH0 with ip address of 10.0.0.2 connected to the ETH1 of the 1st PC with ip address of 10.0.0.1 and 2nd ETH1=connected to LAN (172.16.1.0/24)
does this make sense? this might be confusing but I just want to try this, to protect incoming ssh from our previous Sys admins who intended to enter the LAN 172.16.1.0/24 network. And also to confuse them that they have to pass through 10.0.0.1 - 2.
View 3 Replies
View Related
Feb 25, 2010
I am a networking admin of a network running a mac osx server Running the Darwin 9.8.0 kernel. My goal is to get a firewall computer running ubuntu with the program IQfirewall. My networking hardware goes ( __ cat 5 cables)
*internet* _____DS1___ cisco router_____ a small switching hub___OSX server___a ProCurve switch ___ a cat 5 box____ routers ___ computers.
from what i have read I want the server to act like a gatway/firewall and sort of have the server forward packets to the OSX server.How would I get started. IQfirewall uses a GUI interface and I can later copy my rules if you would want to see them. it is based off of iptables
View 4 Replies
View Related
Oct 16, 2009
2 days ago I did a fresh install of Fedora on my computer to be dual-booted with Linux Mint. The first time I did this install a few weeks ago, I did all of the updates, rebooted (internet still fine) and when I rebooted again, Fedora could no longer connect to the internet (but could still see the networks and ostensibly connect to them). I fixed it then by manually setting the BSSID/IP/DNS/etc.
And this happened again on the new install! This time it took out the internet connection in Mint too. I tried manually setting the connection settings, but that didn't even work for a while. So, last night, thinking that the install might be the problem, I reinstalled Fedora. This morning I finally got my internet to connect on Mint, but I'm concerned that if I do all of the updates on Fedora I'm just going to end up back at square one with zero internet connection.
View 3 Replies
View Related
May 12, 2010
I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
View 1 Replies
View Related
Jun 18, 2011
i wanted to deploy a firewall for my wireless network. low power footprint & small device that can be installed with linux to create a small firewall appliance.i might try configuring shorewall on it.
View 1 Replies
View Related
Sep 20, 2010
I'm using VPNC to connect to a remote cisco network, however I cannot browse the internet after the tunnel establishes. I know this is a DNS issue, as I can ping external address by IP (e.g. google). I can also communicate through the VPN tunnel without trouble.
/etc/resolv.conf gets updated by the VPNC with the remote networks DNS Servers, but I still cannot connect to the internet. I even manually tried to add my local nameserver to the /etc/resolv.conf file, without luck.
Also, just as a side note, I can only establish the tunnel via the command line "vpnc" command. I'm using Fedora 13 with KDE, but knetworkmanager / networkmanager will not establish the tunnel, however I haven't really dug very deep as to why. I've just setup some vpnc config files for loading the various connections manually, as needed.
View 1 Replies
View Related
Sep 25, 2010
I just installed Fedora 13 64bit Gnome, but I can't connect to the internet for some odd reason.
If you look at the image below:
I have marked the network icon, but on my desktop I don't have that icon for some reason...
Since I'm new @ Linux(Picking it up again) I went to the services and checked 2 services:
The network manager service was running but the status said: This service is dead.
And the network service was also running but status was: The status of this service is unknown.
I also went to the Administration menu and checked Network, the first tab showed no devices, but when I went to the hardware tab it did show my card.
I also don't believe that this is hardware problem since the card worked just fine under Fedora 9 or 10(Don't remember).
So if anyone got some solutions for me it would be great...
Some related hardware info:
lsusb
Code:
Code:
View 2 Replies
View Related
Jan 31, 2011
How to make my fedora 8 be able to connect to the internet by using wireless network ?
View 5 Replies
View Related
Sep 7, 2011
I just installed a dualboot win7/F15 on my laptop (dell XPS 15) and everything seems to be working fine except that when I connect to my network it is connected and the network is accessible (I can visit my gateway/ router) but when I try to visit a website it simply never ends loading it.Internet is working on win7 so it isn't my network's fault.Now I found somewhere that updating could help but since I dont have internet I can't update
View 3 Replies
View Related
May 17, 2010
I'm using virtual network (NAT network) for my domU.When I change dom0's firewall setup, the domU will fail to connect to Internet anymore.So far, the only way to bring the network back is reboot dom0 !I try to restart service network and libvirtd on dom0 ... it doesn't work.How can I bring the domU network back without reboot dom0 ?
View 1 Replies
View Related
May 2, 2010
I am attempting to set up a firewall in my home network environment. the rest of the environment is windows, sorry I am attempting now so bear with me. what I have is a cable modem coming in, then my fedora 11 box with 2 nics, then the wireless router and the rest of the network.
everything works fine until I put the linux box in. If I put the firwall in the firewall sees the internet but the wireless router directly after does not. I am doing something wrong with the dhcp I am guessing. I dont want the firewall to give the address to the network I want the router to. I tried to get the firewall to do it (yum install dhcp leafnode) but it kept saying something didn't work right.
so I figure I will let the cable modem give the firewall an ip and the router give the rest of the network their ip's but how do I get the firewall and router to see each other and allow passthrough?
View 1 Replies
View Related
Jul 3, 2010
Does anyone know if it is possible to filter/block network traffic between internal hosts on a lan?
Eg. : Linux firewall/router ( 192.168.0.1) - LAN Default G/W - all internal > external traffic gets filtered.
How would you filter tcp/ICMP/UDP traffic from internal host a ( 192.168.0.2 ) to host b ( 192.168.0.3)
All the internal hosts have the linux f/w as the default gateway, and are all on the same /24 subnet.
I would like to know if I can filter traffic between internal hosts.
View 3 Replies
View Related
Jul 24, 2010
I am using pidgin messenger. Its not connecting properly as our Internet is blocked by a firewall. Can we do something so that it works properly
View 5 Replies
View Related
Jul 28, 2010
I have just installed CentOS and it is working fine!I made a masquerade with the document there: I didn't used the script, because right now, I do not completely understand it, and obviously I am not modifying anything by leaving it like that.I was using Mandriva before and I am used to graphical tools My questions are:I add the following lines in my iptables:
[root@localhost ~]# service iptables stop
[root@localhost ~]# iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
[root@localhost ~]# service iptables save
[code]....
View 1 Replies
View Related
Mar 1, 2009
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
View 2 Replies
View Related
Jul 13, 2009
I upgraded from Fedora 10 to Fedora 11 last night in response to a pop up window. When I rebooted after the upgrade my wife immediately complained about the internet not working. Actually the connection up was working but Fedora 11 upgrade had made it slow almost to a stop There are two XP machines the network behind a local D-Link wireless router with Comcast high speed internet. When I disable networking on the Fedora machine the internet connection immediately returns to normal on the other two machines. Also there is a second or two period after enabling networking for a quick upload or download before the connection clogs.I checked the system monitor network history and found that there is a constant networking send rate of just under 180 kb/s in the background.This occurs even when the browser, email client, and automatic backup are off and the only process showing significant CPU use in the system monitor is the monitor itself.
I tried netstat but there were so many /tmp/orbit entries that I could not scroll up to the top of the listing. Is this normal. If so, does anyone know the netstat command options to just see connections with sent packets. I also tried ifconfig -a. This shows no Rx packets at all, and no TX packets except on eth0, The total etho TX packets matches t,he reported by the system monitor, and in the monitor you can watch the total accumulate in approx 180 kb/sec increments. I don't understand why 180kb/sec TX would make a dramatic difference in internet network internet speed. Comcast reports upload speeds in megabytes. I need to be able to use the net in Federa, but I am also curious to learn what is the caused the problem.
View 2 Replies
View Related
Dec 30, 2009
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies
View Related
Aug 1, 2010
I have just started using fedora 13 and I am not sure if i am in the right area but here goes...today I was online in my fedora 13 partition on my laptop and I had been online for quite a while then I shut down my machine to recharge the battery then a couple hours later I turned it back on and all of a sudden my network manager applet was missing and I could not connect to the internet, I opened firefox and tried to get to my homepage but it basically just told me that I wasnt connected..
I suspected at first for some strange reason that MAYBE it was my NIC so I booted up into my vista partition and low and behold the internet works fine, so the problem is on the linux side, I have tried every command nm-applet but it just keeps saying an instance of nm-applet is already running, I have no clue how to restore the network manager and get my internet back and the only other piece of information I have is that earlier today I did do a bunch of security updates but the internet was working fine all day even after several reboots through out the day.
View 1 Replies
View Related
