Networking :: Firewall Rules To Add VPN Network Into LAN Network
Jun 4, 2010
I greet you at the same time ask me to help with a problem I have and I could not solve. Within the requirements I have is to connect a network that is connected by VPN to my LAN.The detail is I could have connection to the network by adding a network card (eth3) on the firewall and connect to the VPN router (DLINK) cable network, but I can not reach the other estin that are in the VPN.
It should be noted if I add a station within the network: 10.30.1.X/24 has no problems connecting with the other destinations.Physically this router is inside my 10.30.1.X DATA CENTER another wan.
View 1 Replies
ADVERTISEMENT
Aug 26, 2010
can I deny the access to my server for a specific OS? I have one PC which I want to give it acces from winxp, but if it's boot into ubuntu I want to deny all access to my server, same IP, same ethernet card
View 8 Replies
View Related
Jan 26, 2010
Does anyone have tips about iptables rules for filtering network traffice?
View 2 Replies
View Related
Apr 7, 2011
I want some advice for making my system more secure. I want deactivate any network connection that is unnecessary. Only my browser and the update ability of zypper should have access to the internet. On windows there are personal firewalls.
How can I block internetaccess for all other programmes on openSUSE?
View 8 Replies
View Related
Feb 25, 2010
I am a networking admin of a network running a mac osx server Running the Darwin 9.8.0 kernel. My goal is to get a firewall computer running ubuntu with the program IQfirewall. My networking hardware goes ( __ cat 5 cables)
*internet* _____DS1___ cisco router_____ a small switching hub___OSX server___a ProCurve switch ___ a cat 5 box____ routers ___ computers.
from what i have read I want the server to act like a gatway/firewall and sort of have the server forward packets to the OSX server.How would I get started. IQfirewall uses a GUI interface and I can later copy my rules if you would want to see them. it is based off of iptables
View 4 Replies
View Related
Nov 29, 2010
Even though I've set up HTTPS to be trusted, it still blocks my school's https site: "mnsu.edu/eservices" same with SAMBA and SSH.
If enter the GUI and authenticate as root, change anything and apply, then exit: it works fine and so does SAMBA. However, after restarting, everything stops working again.
yet secure firewall configuration that doesn't require any login or headaches.
View 6 Replies
View Related
Apr 7, 2010
I just install 1 firewall using Iptables.
Firewall includes 2 NIC:
NIC1 <IP PUBLIC>
NIC2 192.168.10.1
I installed 1 web server IP: 192.168.10.2
I have some PC IP range: 192.168.10.10->20
I set rules NAT on firewall and PC & web server can connect internet good, but I have problems:
When PC access to web server with IP 192.168.10.2 that ok, but PC can't access to web server when using IP Public. But outside internet, I can access to web server using IP Public.
Rules on IPTables
Code:
# Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*nat
:PREROUTING ACCEPT [950:126970]
:POSTROUTING ACCEPT [89:5880]
:OUTPUT ACCEPT [19:1342]
-A PREROUTING -d 209.99.242.124 -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.10.2:80
-A POSTROUTING -s 192.168.10.0/24 -o eth0 -j SNAT --to-source 209.99.242.124
*filter
:INPUT DROP [1599:157409]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [232:34452]
-A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i eth1 -o eth0 -j ACCEPT
-A FORWARD -i eth0 -o eth1 -d 192.168.10.2 -p tcp --dport 80 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o eth1 -j ACCEPT
COMMIT
View 2 Replies
View Related
Jun 18, 2011
i wanted to deploy a firewall for my wireless network. low power footprint & small device that can be installed with linux to create a small firewall appliance.i might try configuring shorewall on it.
View 1 Replies
View Related
Jun 7, 2011
every now and then Firewall Builder fails to open rules (*.fwb)and I have to use some old backup. it does load 'object libraries' but the main 'currently editing policy' panel is empty.(in gnome, debian testing amd64)
View 1 Replies
View Related
Mar 25, 2011
I suspect this is an initial configuration bug. All firewall logs seem to be going to all
three files. That causes a lot of clutter in the log files, and makes it difficult to see whether there are any serious problems being logged.
View 9 Replies
View Related
Aug 8, 2009
I want to write a custom rule to allow all connections to the ip addresses on my local network (192.168.2.2 through ...99) but I don't know how. I know adding a custom rule asks me to read a file and put it in "iptables" format, but I don't know how...
View 5 Replies
View Related
May 14, 2011
I am new with IP tables stuff and i have a problem....i have a pc Contain a fedora OS and i want to make a small network (4 PCs Contain XP OS) and using the pc of fedora OS as a firewall i want to Prevent the ping (i think it called(ICMP)) in the privat network and prevent one of the PCs from Browsing internet(prevent port 80 and 81 as i think) and i still don't know how to make the internet go Through the firewall to the private network...
Note: WAN = eth0
LAN = eth1
View 1 Replies
View Related
May 2, 2010
I am attempting to set up a firewall in my home network environment. the rest of the environment is windows, sorry I am attempting now so bear with me. what I have is a cable modem coming in, then my fedora 11 box with 2 nics, then the wireless router and the rest of the network.
everything works fine until I put the linux box in. If I put the firwall in the firewall sees the internet but the wireless router directly after does not. I am doing something wrong with the dhcp I am guessing. I dont want the firewall to give the address to the network I want the router to. I tried to get the firewall to do it (yum install dhcp leafnode) but it kept saying something didn't work right.
so I figure I will let the cable modem give the firewall an ip and the router give the rest of the network their ip's but how do I get the firewall and router to see each other and allow passthrough?
View 1 Replies
View Related
Jul 3, 2010
Does anyone know if it is possible to filter/block network traffic between internal hosts on a lan?
Eg. : Linux firewall/router ( 192.168.0.1) - LAN Default G/W - all internal > external traffic gets filtered.
How would you filter tcp/ICMP/UDP traffic from internal host a ( 192.168.0.2 ) to host b ( 192.168.0.3)
All the internal hosts have the linux f/w as the default gateway, and are all on the same /24 subnet.
I would like to know if I can filter traffic between internal hosts.
View 3 Replies
View Related
Jul 28, 2010
I have just installed CentOS and it is working fine!I made a masquerade with the document there: I didn't used the script, because right now, I do not completely understand it, and obviously I am not modifying anything by leaving it like that.I was using Mandriva before and I am used to graphical tools My questions are:I add the following lines in my iptables:
[root@localhost ~]# service iptables stop
[root@localhost ~]# iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
[root@localhost ~]# service iptables save
[code]....
View 1 Replies
View Related
Jun 3, 2011
I'm working on setting up access for our developer via Telnet, we are on a local network behind a physical firewall. I set up the standard Telnet service for Fedora15 and from localhost I can login via any user and root.... However I cannot login from another terminal on the LAN, even though I can ping and FTP to the fedora15 box. I added the firewall rules for telnet, that did not work, so I disabled the firewall, still cannot get a connection via port 25. I feel either port 25 is closed in another manor or the telnet is restricted to the localhost.
Also I cannot login to root to configure the Firewall Desktop GUI, only standard users, is this an issue? I also cannot login to the console as root even though I use the correct password.I can only su to root and sometimes it is a PITA. There must be some settings to clear these issues up...
View 2 Replies
View Related
Feb 3, 2010
i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.
View 4 Replies
View Related
Jan 12, 2011
could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
View 9 Replies
View Related
Apr 23, 2010
I set up a squid transparent proxy and I have a problem with an iptable rules. I have a rule to redirect all request to port 80 to go on port 3128. To do so, I'm using this iptables command :
Code:
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128
This command is working like a charm. The only problem is, for some unknown reasons, this rule will be dropped at some point. I did not manage to identify what is causing this to happen. It occurs during night, but I have nothing about that in my log files. messages / firewall / ...) The only way I managed to reproduce this 'dropping' is this one: I type the command like as root. The command is effective and working fine. I open yast, I go to the firewall module, the I do a simple "save changes and restart firewall" (without changing anything). As soon as this process is finished, the iptables rule is gone.
-How can I make this rule permanent ?
-Is there a place where I can launch a script executing this rule, after the yast firewall module is 'touched' or something ?
View 3 Replies
View Related
Jul 7, 2010
I have a set of iptables I have downloaded and modified for my use. I had it working for 1 lan and wan access. I now would like to have: wan access, 1 lan, and 1 wlan. I need to administer the entire network from my wireless laptop on the wlan network so I need to be able to access the lan from the wlan network, and have the wlan access the lan network. Here are my rules:
#!/bin/sh
# IPTABLES FIREWALL script for the Linux 2.6 kernel.
# This script is a derivitive of the script presented in
# the IP Masquerade HOWTO page at: [URL]
# It was simplified to coincide with the configuration of the sample system presented in the Guides section of [URL]
# This script is presented as an example for testing only and should not be used on a production firewall .....
echo -e " Firewall server rule loading complete "
View 3 Replies
View Related
Jul 26, 2010
Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
View 1 Replies
View Related
Mar 29, 2010
I am trying to add a custom allow rule in the firewall for a range of IPs from 74.201.102.0 - 74.201.103.255, what exactly am I supposed to enter in the source box? I believe I have to add two separate rules for 102 and 103, and I put /24 at the end of both, is this correct to get the whole range of IPs?
View 3 Replies
View Related
May 25, 2011
1. Under openSUSE 11.2, I allowed printer sharing through CUPS by setting the Firewall to Allow Services of CUPS in the External Zone section. I don't see the CUPS option in the Allow Services of the Firewall under 11.4, any zone. Is my system missing something?2. If I turn off the Firewall, the client computer can see the printers, even get the broadcasted names. If I put port 631 in TCP of the Advanced setting of the External Zone, the client computer can see the printer too, but I know I read somewhere that putting 631 in the External Zone is basically allowing printer requests from the entire internet.
View 2 Replies
View Related
May 9, 2010
I have a set of iptables rules generated by Firestarter, and i'm in the process of trying to familiarise myself with iptables itself, but there's one particular rule which is confusing me, perhaps somebody could explain it to me
My INPUT chain reads as follows:
Code:
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT tcp -- cdns01.plus.net anywhere tcp flags:!FIN,SYN,RST,ACK/SYN
ACCEPT udp -- cdns01.plus.net anywhere
ACCEPT tcp -- cdns02.plus.net anywhere tcp flags:!FIN,SYN,RST,ACK/SYN
[Code]...
Given that the firewall is actually blocking packets, it can't be this simple, so what am I missing?
View 1 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Mar 29, 2010
switched recently to 11.2 and it works fine for me as workstation I want to set up a router separating a part of the network and also acting as a firewall/proxy... Configured 2 Ethernet Interfaces, checked Ip forwarding in Yast but it does not forward the packets from the "internal" to the "external" network. Hovewer after I set up my router as default for machines on internal network I can ping the external interface but no adress on external network (particularly the one of the default router) !!! From the router I can reach both networks and the net via default gateway on external. Tried to:
a) switch firewall completely off
b) iptables -P FORWARD ACCEPT
c) masquarading internal adresses to the external network
my interfaces configuration looks like:
eth0 Link encap:Ethernet HWaddr 00:13:D4:E3:A2:7B
inet addr:192.168.1.34 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:d4ff:fee3:a27b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
View 4 Replies
View Related
May 19, 2010
We have reason to ask this of you following some strange firewall behaviour - But don't panic If you use openSUSE 11.2 and you think: Your Firewall should be running You are not sure but think it should be check and report back here.
This is how to check:
Go to Yast > Security and Users > Firewall
View 9 Replies
View Related
May 27, 2010
I did a shields up test and it told me that 1056 ports were stealth but that my pc responded to ping and was visible on the net. How do i fix this?
View 4 Replies
View Related
Jul 13, 2010
I can't get my openvpn work if the firewall is on , and I also don't see any option to allow openvpn service in firewall allow service.
View 1 Replies
View Related
Jul 24, 2010
I'm trying to get OpenMPI (a parallel programming library) working on my home system. I have just two machines on it now, t61 and quad, connected through a router. (Which is also connected to cable modem for internet.) I can ssh between the machnes, mount directories with NFS, etc. However, I just can't get the OpenMPI to run. The OpenMPI message board suggested that the most probable cause is that the firewall is blocking TCP. I don't know how to tell if that's the problem, and can't find any manual for the SuSE firewall, while the various Wikis &c that pop up in a search don't provide any information that addresses my problem.
View 9 Replies
View Related
