I want to make make my fedora machine access-able over the internet. I want to assign IPV4 address to this machine( I already have one IP address ) which can be used for this. What configuration changes I need to make in fedora to make it accessable to the external world
View 6 Replies
I have an odd thing going on with DNS. I have two machine's running Ubuntu and for some reason they do not always resolved internet addresses on my Internet connection. This has gone on since the Ubuntu 8.04 when I first started using Ubuntu. Anyway, I use OpenDNS' DNS servers and I have been running perfectly.
This is what is odd. My Windows XP Machine never has the problem. It always resolves. Does Windows Possibly have some Microsoft hosted DNS server hard coded in there as a backup? Things are working fine this way so I am not looking to change. I am just a little puzzled and finally got around to asking, "Why is this".
I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies View RelatedI tried to authenticate using ntlm proxy authentication service and my computer could not retrive the IP address. Currently I am using fedora cammbridge
View 1 Replies View RelatedI am doing a test on MAC learning and for that ,I need to change my MAC address of linux machine while the interface is UP. To be more clear, consider eth1 in a fedora core 8 machine. And while the interface is UP. I am running a script which changes the MAC address from 10:1:1:1:1:1 to 50:50:50:50:50:50 (i.e 50 times MAC address is changed) . When I try to change the MAC address when the interface it UP, it gives me the following error :
siocsifhwaddr : device or resource busy
I know the way of changing the MAC address by bringing down the interface but I need to know if this can be done while the interface is UP.
Is there any tool or command where I can track down the IP-ADDRESS of a machine within the subnet using its MAC-ADDRESS .
View 11 Replies View RelatedI am a windows user with no linux experience prior to Friday. Im setting up a music server (SqueezeCenter) running Fedora 10.
With the help of posts of this site Ive made good progress with complicated stuffnamely getting Samba and VNC working. My Fedora machine and my windows machines now see each others shared files, and I can control my Fedora machine from my windows machine. (The Fedora machine will ultimately be headless.)
But Im having trouble with a seemingly simple issue setting up my Fedora box with a static IP address. With DHCP enabled on my network Ethernet adapter, all works fine. I then used the System>Administration>Network menu to disable DHCP and to assign the same IP address that DHCP chose. When I do this, two cases need to be distinguished:
1. If I keep the box checked for Controlled by Network Manager, the Network Manager Applet reports a network connection, I nevertheless cannot access the internet, but my Fedora machine is able to communicate with my Squeezebox music player (connected to my network via my DSL modem Ethernet connections, and with a fixed IP address). 2. If I uncheck the box Controlled by Network Manger, then the Network Manager Applet reports no network connection and my Fedora machine is not able to communicate with my Squeezebox music player (and I of course have no internet connectivity).
Ive seen references on other posts suggesting that the Network Manager service be disabled. But I see no way to manually configure the network.
Is it possible to make this automatic, that is, how can I make the server active during the machine boot up?
View 4 Replies View RelatedHow do I decide what IP address to enter in my config file when assigning a static IP. All of the instructions I can find say something like "of course you should modify the file according to your own settings." Should I just use the gateway and IP that returns from "iwconfig" and "route -nee"?
View 5 Replies View RelatedI have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies View Relatedlost my internet connection on fedora 12 ? i try to assaing the ip address manual in the configruation part but no nothing happen I've tried googling for the problem
View 4 Replies View RelatedI want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies View RelatedI can not connect to internet using Fedora 9. But I can connect using Windows XP on the same machine. I have a ADSL modem & the modem is connected to the Ethernet Port of my Computer.
View 3 Replies View RelatedHow to make internet sharing in Fedora with two inputs & one output.
View 14 Replies View RelatedI am new with IP tables stuff and i have a problem....i have a pc Contain a fedora OS and i want to make a small network (4 PCs Contain XP OS) and using the pc of fedora OS as a firewall i want to Prevent the ping (i think it called(ICMP)) in the privat network and prevent one of the PCs from Browsing internet(prevent port 80 and 81 as i think) and i still don't know how to make the internet go Through the firewall to the private network...
Note: WAN = eth0
LAN = eth1
I'm just an undergrad with duck tape and google searches to hold this place together. Anyways on to my question. Where I work, we have a tape library but no way to configure it, the backup software simply talks to the robot to load and unload tapes. There is a network port on the library and I do have the software, but have been running into problems getting access. I was wondering, is there a way to determine the ip address of this machine by plugging in a cross over cable with a laptop and scanning it? What tools could I use to do this?
View 5 Replies View RelatedMy ISP can give me up to 5 ip addresses. Is it possible to "forward" one of them to a machine to get rid of nat? I was thinking of "forwarding" one public ip to my machine and let the rest of the network share one ip using nat.
View 7 Replies View RelatedI am running Ubuntu 8.04, and I am able to access my machine via SSH, but I only want the log in screen visible on the machine itself, yet still able to work with the SSH. But to do this, I have to log in, get the IP address, log off, then log in via SSH. How do I make the machine receive an IP address during the boot-up!
View 7 Replies View Relatedi want to know mac address of a particular ip but the problem is that i am unable to ping that ip but that ip is being used by someone in my local network that i know from my proxy logs. i want to know the mac address of that ip,
View 5 Replies View RelatedI want to setup 1Gbps our lab network and we purchased 'Buffulo Giga layer switch ' with 24ports. Is there a way to tell DHCP to assign specific IP to a particular MAC address of a machine ? We want to use DHCP and whatever the port we use ,it should have same IP ..
View 1 Replies View Related#1: Where can I assign a static IP address on my lubuntu box?
#2: Also, is it possible to see the lubuntu box from a Windows machine? If so, how does that work?
I am accessing a remote DB using JDBC from inside a java program. is there any terminal command with which I can see the remote machine's ip/mac address?
View 1 Replies View RelatedI have the following setup:
Location A:
Internet -> ISP 1 -> Firewall 1 (external IP address) -> Web Server 1 (internal IP address)
Location B:
Internet -> ISP 1 -> ISP 2 -> Firewall 2 (external IP address) -> Web Server 2 (internal IP address)
I want to find out if I can failover to another location without having to make changes on the DNS server. Just by redirecting traffic from ISP 1 router to ISP 2 router.
I have a Linux IPTables firewall on Centos 5.3.It has one physical interface to the internet and 2 internal interfaces to a DMZ and TRUSTED zone respectively.There are 10 virtual interfaces linked to the physical public interface.Emails are being sent from my server in the DMZ out to the internet, but it is being shown as coming from the firewall IP address.It must show as coming from one of the virtual interfaces.
View 4 Replies View RelatedRouter: Linksys WRT54GS
NIC: D-Link DWA-645 (RangeBooster N 650 NoteBook Adapter)
i have successfully changed my MAC address. By doing:
ifconfig wlan0 down
ifconfig wlan0 hw ether AA:BB:CC:11:22:33
ifconfig wlan0 up
When I do:
ifconfig wlan0, it shows my new MAC address.
After changing, I cannot connect to the Internet. I have already disable mac filtering in my router. What did I miss out?
My ISP has given me 3 IP addresses to use for the internet (76.148.200.3, 76.148.200.4 and 76.148.200.5).
If I do a "wget whatismyip.com" or netcat into another server, I am appearing as 76.148.200.3.How do I change my route (command line) in linux to route internet traffic through 76.148.200.5?
Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
code....
i have followed multiple guides to make my home server use a static ip address. no matter what i do it always reverts back to its dhcp address after about 2 minutes. how do i get the static ip address to stick, or be permanant.
View 9 Replies View RelatedThe cable internet I'm using runs on Dynamic DHCP IP addresses. I changed it to a static IP address in my router settings, but it keeps changing. This means that I can't connect to my home server from a remote location.
Is there anyway to run my ubuntu server on a DHCP IP address without connecting through my router 192.168.1.xxx?
I have a strange problem. I have to clone my MAC address (and specify a different MAC address) to get internet. Without the new MAC address I get an IP address but no internet. This happened with my old (updated from 7.04 -> 10.10) OS installation and with a new, clean install of 11.04. So I have a workaround. But I don't know what the problem is.
Ps. I recently switch modem and router. And I had the problem with old and new modem/router combinations.
A few weeks ago, my Ubuntu machine (Hardy Heron) suddenly stopped connecting to the internet. I usually run it headless, and it was still fine connecting to other machines on my LAN (in either direction), but I can't ping out or run any other 'net stuff. I even tried pinging by IP address instead of name. I did notice that my eth0 (I only have one NIC in the machine) had mysteriously changed to eth1, but I fixed the /etc/networking/interfaces file and the udev rules and now it's back to eth0. Still gets LAN but no internet. I've done ifup/ifdown a few times, even restarted more than once. I could always try another NIC, but I thought I get any hardware suggestions first.
View 11 Replies View Related
