Networking :: No Internet Connection When Firewall (UFW) Enabled
Jul 6, 2010
When I enable my ufw it completely shuts me out and I have no internet connection. When I do:
Code:
sudo ufw status numbered
I get:
Status: active
To Action From
-- ------ ----
[ 1] 80 ALLOW IN Anywhere
[ 2] 80 ALLOW OUT Anywhere (out)
But I need to disable my ufw in order to reconnect back to the internet. Why is that? Doesn't the above rules indicate that I should have inbound and outbound traffic even if my firewall is up?
View 5 Replies
ADVERTISEMENT
Nov 25, 2010
I have installed Ubuntu 64 10.04 server. I have two nics and have set them up to both be static with their own IP with the correct gateway, network, broadcast, subnet and dns-nameserver. When I have both enabled, I can ping local pc's but I can't ping Internet sites like Google nor can I get out to the Internet with apt-get or Lynx.
If I disable one, then I am able to get out to the Internet. All my configs look good, and it does not matter which one I disable, just so long as there is only one NIC on, everything is good.
View 1 Replies
View Related
Sep 30, 2010
I've been reading around, but not had much success at all in trying to share the internet connection from my laptop to my phone.all the articles i read refer to earlier versions of Ubuntu and the packages they mention have become obsolete, according to the apt-get tool.im not that new to Linux, but my networking probably isn't up to scratch.if anyone could help me, that would be great, im using Ubuntu 10.04 at the time of writing.
View 2 Replies
View Related
Nov 19, 2010
I am establishing ad hoc connection between two PCs
1. LAPTOP: WIFI adapter OS: Ubuntu 9.10 Connection name: trial Address: 192.168.1.36 Subnet: 255.255.255.0 Gateway: 192.168.1.1
2. PC with wired Internet connection + WIFI adapter OS: Windows XP Connection name and parameters same as above except ip: 192.168.1.40
I can see trial is getting connected with excellent strength. When i try to run an Internet on Ubuntu it is not working. Firewall is not active and Router is enabled.
View 1 Replies
View Related
Jan 17, 2011
I have problem on VPS running opensuse. When I enable firewall outbound connections stop working. I have tried everything I know (not much when it comes to firewall (iptables)) but could not solve this.
Here is my ifconfig:
Code:
I used xxx.xxx.xxx.xxx to hide real address.
View 2 Replies
View Related
Apr 19, 2011
I want to set up Ubuntu Server as a firewall in which I want to direct my internet connection through where Ubuntu Server will block, filter, and monitor anything that come into either three of my computers using the same internet connection. Is this easy to do? sum up the steps that I will have to go through to establish this, and any relevant information, and where I might be able to find necessary information etc. I plan to use ubuntu-10.04.2-server-i386.
View 3 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Jun 27, 2009
I just fresh installed Fedora 11, and tried to connect via ethernet. I connected the cable and connection was started (in the network managed the two gray circled turned green) but then instead of connecting me the connection was aborted. I am behind a router if it helps and made sure eth0 is enabled. PS this is the output of "service network start":
Quote:
[root@Gal-PC subsys]# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
[code]......
View 5 Replies
View Related
Jul 14, 2011
I have been looking for a solution for this but am not certain how to word it to get a viable answer.My scenario:
Athena
Win7/Ubuntu 11.04
eth0 10.11.12.100/16 gateway+dns: 10.11.12.1
[code]....
View 9 Replies
View Related
Jun 20, 2010
Since that time I moved to Archlinux and I love it. I do however run lubuntu live from a USB for my work PC. I am having a problem with it. I think it's okay to post here because the core of the system is still Ubuntu. I don't think LXDE is the problem. I start up the live environment and it says 'wired connection connected' but I can not load any pages or do anything.
I thought it may be a problem with configuration so I copied down (from Windows) the IP, Subnet, Gateway and DNS. I put them in manually and it doesn't say connected any more and still no connection at all. I am unsure what to do from here. I am not really familiar with Ubuntu enough to try much. I tried to 'dhcpcd eth0' but dhcpcd isn't installed. I guess the default Ubuntu network manager has dhcp enabled automatically.
View 9 Replies
View Related
Jul 22, 2010
I am trying to set up a computer to act as a firewall/gateway on my network, and am using the Firestarter program to do this. Everything appears to be set up correctly, and I followed the instructions on their website completely, and I get an error message when I try to start the firewall. It says that eth0 (my internal NIC) isn't ready, and to make sure it's active.
View 3 Replies
View Related
Aug 11, 2009
I'm running Jaunty. For some reason, I cannot run Pogo games when the firewall is enabled. I've tried allowed "direct play gaming", thinking that might help, but it didn't. So i guess I need a custom protocol. What ports does Pogo use so I can allow them? Hopefully someone knows... and yes, I do have java. Pogo works if I turn the firewall off. Also, Ktorrent does not work either. I happen to know the ports this one uses, but when I make the protocol, it still doesn't allow torrents to run. The ports I'm trying are 6881 and UDP 4444.
View 2 Replies
View Related
May 14, 2011
I am new with IP tables stuff and i have a problem....i have a pc Contain a fedora OS and i want to make a small network (4 PCs Contain XP OS) and using the pc of fedora OS as a firewall i want to Prevent the ping (i think it called(ICMP)) in the privat network and prevent one of the PCs from Browsing internet(prevent port 80 and 81 as i think) and i still don't know how to make the internet go Through the firewall to the private network...
Note: WAN = eth0
LAN = eth1
View 1 Replies
View Related
Apr 24, 2010
Im a long time windows user and just installed Ubuntu 9.10 and have heard that i dont need any antivirus or spyware program on it, also is the firewall enabled by default if there is one and last thing do you need to do things like disk clean and defrag if so how.
View 6 Replies
View Related
Sep 5, 2010
i am using 9.10 karmic. Firewall is enabled. added ports with ufw allow [portnumber], and i still cannot connect to a port number. iv tryed ufw allow ssh/tcp but that does not work. the ports work when i disable the firewall and i dont want to do that.
ufw is available in all new installations of Ubuntu since 8.04 LTS, but is disabled by default. The standard Ubuntu installation has a no open service ports policy, so enabling the firewall by default doesn't gain any extra security in the default installation, but could provide confusion for people new to Ubuntu when new software that is installed does not work because of restrictive firewall rules. As a result, when first adding ufw to Ubuntu it was decided that users must 'opt-in' to using the firewall. In Ubuntu 9.04 and later, you can enable ufw during installation using preseeding. See /usr/share/doc/ufw/README.Debian for details.
View 7 Replies
View Related
Apr 3, 2011
I have installed the graphic user interface for IPtables and enabled this firewall. However, I find it a bit strange. What is the difference between rejecting and denying the traffic? If I want to configure IPtables as two-way, how can I define which of my apps can connect to the internet and which can't? If this firewall is enabled, does it really run in the background, protecting the user,or does it run only when its GUI is opened?
View 9 Replies
View Related
Jan 26, 2010
I already have Linux Enterprise 5 system installed with some server packages such as Webmin, Active Directory, Web Server which also act as Internet gateway. Now I want to add firewall functionality to block clients ip accessing internet.
View 14 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jan 14, 2011
is this possible on 2 Linux boxes will act as a INTERNET Firewall + Filtering: 1st PC = CENTOS 5.5 functions as a firewall using iptables with two NICS 1=ETH0 connected to internet with a public ip and 1=ETH1 with ip address of 10.0.0.1 connected to the 2nd PC Centos 5.5 with squid/dansguardian with ip address of 10.0.0.2
2nd PC = Centos 5.5 functions as a squid + dansguardian internet filtering with 2 NICS 1=ETH0 with ip address of 10.0.0.2 connected to the ETH1 of the 1st PC with ip address of 10.0.0.1 and 2nd ETH1=connected to LAN (172.16.1.0/24)
does this make sense? this might be confusing but I just want to try this, to protect incoming ssh from our previous Sys admins who intended to enter the LAN 172.16.1.0/24 network. And also to confuse them that they have to pass through 10.0.0.1 - 2.
View 3 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related
May 1, 2011
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies
View Related
May 12, 2010
I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
View 1 Replies
View Related
May 17, 2010
I'm using virtual network (NAT network) for my domU.When I change dom0's firewall setup, the domU will fail to connect to Internet anymore.So far, the only way to bring the network back is reboot dom0 !I try to restart service network and libvirtd on dom0 ... it doesn't work.How can I bring the domU network back without reboot dom0 ?
View 1 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
May 18, 2010
I am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
IP : 192.168.2.1 ,
gateway : blank
dns1 : blank
dns2 : blank
sys2 firewall ,IPTABLES )
code....
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
View 3 Replies
View Related
Feb 8, 2010
i have a linux server runnig oracle applications. i need to access this server from putty using ssh through internet. i did by registering my static ip with the dnydns.org and i am able to connect to the server. but now there is no security to authenticate any user as any one knowing the password can login to it.
i thought of configuring the firewall of linux server but the client ip`s are not static and they change continiously. so thought of keeping one more pc between the server and the router which will do the work of authenticating. but i am confuse as how to configure it to allow the packets coming from the internet after authenticating and to by pass the packets generated from internal LAN?
View 8 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
