I am using pidgin messenger. Its not connecting properly as our Internet is blocked by a firewall. Can we do something so that it works properly
View 5 RepliesI was using Transmission BitTorrent the other night, when I noticed that I was getting heavily spammed by one particular IP. I then stopped the torrents and disabled the network.I wanted to add my own block-list, containing this IP, to $HOME/.config/transmission/blocklists, but could not get it working. Transmission is supposed to parse this text file into binary format upon startup. I tried both allowed formats, but Transmission kept on creating an empty binary file (this was version 1.93 in the official repo, I have since upgraded to 2.33 by adding a PPA, and it now works correctly).
I then blocked this IP in the firewall outbound traffic policy, allowing Transmission, on the port number that I forwarded on the router, on the inbound policy. After a restart, I watched the torrents picking up speed as more peers connected, and then saw this IP getting blocked. However, the same IP immediately also appeared as a peer in one of my torrents.I then double checked all settings and log files, to ensure that there is no typo. The same IP that was shown as blocked in the log files, also successfully made a connection to Transmission. After a while I gave up, and shut down.The IP was an incoming connection, but was explicitly nominated to be blocked in outgoing traffic. The firewall was supposed to silently ignore this IP, not making a connection possible.
ICMP filtering was enabled, with the following not allowed:
- Address Masking
- Redirection
- Source Quenching
Now surely this is not normal?Is this a bug in ip-tables?Isn't this a serious security breach?
The firewall in Fedora 12 seems to block UPnP by default, but opening port 1900 for UDP, as I have seen suggestedes not resolve the problem.have the following three scenarios:Firewall Enabled: Transmission cannot open a port by UPnPFirewall Enabled (1900 UDP allowed): Transmission cannot open a port by UPnPFirewall Disabled: Transmission opens a port via UPnP fineAny ideas? Yes, the port that I'm trying to open is also allowed. Router is a Linksys BEFSR41 v4.3, should you care
View 6 Replies View RelatedI'm runnig f 13 on my laptop, and it runs like a charm. But once in a while, the internet doesn't seem to work properly. It mostly works, but right now i am unable to reach certain pages such at google (which is annoying), whereas other pages like yahoo and this one works perfectly well.
View 2 Replies View RelatedI just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI uninstalled Empathy and installed Pidgin, because I just couldn't take Empathy's lack of features any more. The "Me" menu doesn't work properly with Pidgin, though. Every time I change my status via the Me menu, it knocks me off-line on three of my four accounts. how to disable (or even remove) the "Me" menu? It's only functionality is to control messaging and social networking services, right?
View 6 Replies View RelatedWhenever I open my gtalk ID on pidgin all my blocked contacts get unblocked. Is this a known bug or am I doing something wrong.. It has been happening for a long time and I have installed/reinstalled pidgin quite a few times during this time.
View 6 Replies View RelatedIf I use my current iptables firewall settings my php includes from my own site get blocked by the firewall. If I use accept all tcp and udp it still does not work. If I use a default policy of accept all, then the php includes work which is not safe. I am running a drupal 6 site on a centos 5.3 vps with apache 2.2.0 and php 5.2.6 w/ safe mode on. He is my current iptable configuration.
Quote:
Chain VZ_FORWARD (1 references)
target prot opt source destination
Chain VZ_INPUT (1 references)
target prot opt source destination
[code]....
I run ubuntu on home pc and am very happy with it. I use internet to surf and to see my email on gmail.com etc. What commands should I give to setup ufw firewall so that only this much is allowed? Also, where can I see if some other connections have been blocked?
View 9 Replies View Relatedi have a server running vsftpd, and when i connect to it from the server itself using my externel ip address, everything checks ok, and i can browse files. but when i try to do the same on a windows computer on my network, this is what happens: [my externel ip is blocked out with x]
[Code]....
now mind you, my linux server is running from port forwarding from my router, which is connected to the main computer, and i have ssh and squid running as well. not sure if those two have any affect on the service. i think this is a problem with the firewall, because i have read somewhere that multiple ports need to be open for a passive ftp to work.
I setup Mediatomb on another box in my house to connect to with XBMC. XBMC will only connect though if the firewall is off on the local machine. I have both TCP and UCP ports 1900 and 50500 (the port for Mediatomb) enabled on my laptop (local) and the correct ports are open on the remote machine (my wife's vista laptop will connect through XBMC). I can connect to Mediatomb through it's web interface (to set visible folders/files) but not through UPnP (at least not through XBMC)
View 9 Replies View RelatedSmall server running 5.3 - stock postfix configured to use Maildir. Dovecot configured but both pop and imap ports blocked by firewall. Access to mail is via Squirrelmail via https. Configured to virus scan via ClamAV. Works just fine. Now I want to add procmail filtering. So I create these two files - ~/.forward and ~/.procmailrc in my user home dir: "|exec /usr/bin/procmail -f- || exit 75 #mpeters"
View 1 Replies View RelatedIm using fedora14-KDE and installed scim. Scim works good in Konqueror, terminal, kwrite, kword... but do not work with firefox, pidgin...I dont know how to fix this problem.
View 5 Replies View RelatedI have one small question. I have Debian 5.0 Lenny with kernel 2.6.31.3. I have also Pidgin 2.4.3. The question is: When I try to register on the server login.icq.com, just as login.messaging.aol.com port 5190 and 443 as a result of getting the same message "Connecting to 597044344(my room) is broken ". At the same time kopete - also not connected, but connected gnomeicu, with whom I have some inconveniences. Maybe someone knows how to make pidgin connecting servers?
View 1 Replies View RelatedI am new with IP tables stuff and i have a problem....i have a pc Contain a fedora OS and i want to make a small network (4 PCs Contain XP OS) and using the pc of fedora OS as a firewall i want to Prevent the ping (i think it called(ICMP)) in the privat network and prevent one of the PCs from Browsing internet(prevent port 80 and 81 as i think) and i still don't know how to make the internet go Through the firewall to the private network...
Note: WAN = eth0
LAN = eth1
I have been through a lot of posts and was still unable to connect to the internet using wvdial utility after doing all the changes. I being a newbie to this operating system, didn't know how to get started. After going through a lot of posts, I came across an application that is going to be a part of Fedora 12 called ' blueman '. It is used to connect to the internet using a gprs enabled phone via bluetooth. It integrates itself with Network Manager making it even more easier to use. To install it type the following commands in the terminal:
su
Type in your password and hit enter. Then type
yum install blueman
The application is only 575kb and will install instantly.And after a reboot fedora will show an applet related to that application. Open it and click search to list all available devices and select your phone and then select bond to pair your phone with your computer ( if it isn't already). After bonding right click your phone and select serial ports>dial up service. this will make the gprs/edge/3G connection to appear in network manager and selecting it will connect your computer to the internet.
This was the bluetooth way. If you want to connect through USB, just plug in your phone and select PC Suite mode in your phone. The fedora installation will automatically detect your phone as a modem and the connection will appear in the network manager.
This works on all N series Nokia phones and also most other phones as well.
I'm using ADSL modem (not router) and I can't connect to internet. The network manager and the pppoe-setup command doesn't work. So I'm asking some of the experienced users of fedora 12 to help me setup my connection.
Details: ADSL modem with pppoe connection (working fine on win xp)
This past fall, I formatted my hard drive and put fedora 12 on. Worked fine until my old hard drive decided to die. During the last few days of dying Fedora stopped being able to connect to my Linksys Wireless G router(I'm hard wired), or detect any connections. I just assumed this was the hard drives fault.
Now, I have a new WD hard drive with Fedora 14 on it and still cannot connect to the internet. I fear worst case scenario would be my ethernet port is dead but I wouldnt know how to detect that. I thought that it might be a problem of drivers also but couldnt find anything on this subject.
[Code]...
How can I make iptables allow my windows client to see my PC / smb shares? When I turn off the fedora firewall it just works fine, but how can I manage smb in a more secure way via iptables to work?
Code:
iptables -A INPUT -s 192.168.0.0/255.255.255.0 -j ACCEPT
But where do I get the correct address from? Will this example allow only 192.168.0.0 (is this a valid IP at all, usable by any PC? ) or anyone in the network (aka 192.168.0.*) to access my share?
In my Ubuntu 9.04 installation, just a few days ago, I lost my usage of the internet. I still had internet access. Firstly though, there was a problem with the router, so I tried a friend's router (both Netgear DG834) and the friend's one worked. But in Ubuntu, I could not access any web pages or email. Skype works.
I tried using my netbook and that could access web pages okay. So then I booted my main PC into the old installation that I kept there of Ubuntu 8.04, which I am using now. And in this the internet works just fine, I can access websites and download and send email.
But in Ubuntu 9.04, it seems like something is blocking my access. I do not recall installing anything new, although something may have been updated recently. I can see the DNS servers from Ubuntu 9.04 and it gets an IP address from the router. What is the likely cause of the Internet being blocked for websites and email (but not Skype)?
I recently set up a network of computers via Ethernet, all of which use Fedora 10. I would like to be able to get any computer on the network to hook up to the internet.(I think the solution is now figured out - see below, on page 2, "problem solved")
View 14 Replies View RelatedHow can I connect laptop to internet using GPRS enabled Phone?
Phone is Nokia 6600 slide. And laptop(Dell) has F10 installed.
I have installed Fedora 14 on my laptop And trying to use MTS MBlaze Mobile BroadBand Connection And its a USB MODEM in order to use usb modem I am using use 3 packages ie
1. usb_modeswitch
2. usb_modeswitch_data
3. wvdial
Its connecting when i Dial using wvdial as below
root@Athreyasa Athreyasa]# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
[code]....
After connecting i am getting ip as 180.215.44.134 gateway as 10.212.64.1 but if i try to browse the Internet using firefox it says no server found error.I tried to ping [URL] and its not pinging after connecting. nslookup also fails against [URL]however if i ping any of the ip that i am getting while connecting it is pinging Also disabled the firewall and selinux is set to disable just in case to check something else is blocking but no luck
I have properly configured my router to open a port for Transmission and Vuze. The OpenSuSE firewall settings are somewhat confusing, however. How do I add a port specifically for the BT protocol? I know it's the firewall causing issues, because when I shut it down, my BT apps roar to life, and die with a whimper when I turn it back on. In Ubuntu, opening a port in the router is automatically configured in the firewall; that is apparently not the case with this distro.
So, when I go to Yast Firewall, I see "allowed services" under the tabs available. When I hit that tab, I see a dropdown menu that contains services such as NetBios Server and Samba Server. Am I choosing one of those available and adding a port to it? Am I adding a custom service via the Advanced settings, and if so, why isn't there a way to label the service so that it shows up under allowed services?
I always edit /etc/default/grub to fix my touchpad issue and make it work on Ubuntu based distros. Recently I have installed Fedora15 and I tried to do the same work on it but I couldn't find the file. Do you know where is it in Fedora?
View 2 Replies View RelatedI am using Ubuntu 10,04 with a gnome interface on an ASUS K70IJ. It all works well, just the internet connection is sometimes blocked or very slow. I have tried it on several places (offices, hot spot, friends) with wireless lan and ethernet. I thought it might be a problem with the pilot for the internet connection. Can anybody tell me where I could find such a pilot and how I do to install it?
View 1 Replies View RelatedI am trying to connect my desktop to the internet via my Linksys wireless usb WUSB11v2.8 adapter. My network showed up in the Network manager as soon as I installed Fedora and it asked for my network key, but it still doesn't connect. It just keeps asking.I was reading that possibly the driver is not compatible with the OS. I heard about RPMs and the ndiswrapper program that supposedly is supposed to help with compatibility issues so I went and installed both via a direct ethernet connection.
I guess my question is now since I have these programs, what else do I need and how do I go about completing the installation? I pretty much need to be baby stepped by step into how to do this including the best place to install the software, what files do I need, and where and how if I even need to get my device's chipset.
i want a downloader so that when i save wiki saves for me all the links in the wiki page, i have worked with flashgot but it is not proper and does not work properly.
View 1 Replies View RelatedI recently installed F13 on my Toshiba Satellite C650. It has a buggy ACPI which no linux distro till date supports. I got that covered though. But my problem is that the ethernet port works only if the kernel is >=2.34. But F13 came with 2.33.
I do not have an access to a wireless network. Please tell me how to update the kernel without connecting to internet directly. I am new to Fedora. I have been using Ubuntu for some time and this can be achived in ubuntu by downloading the DEB packages and dependencies.
I have a centos5.3 server. I want to configure it as transparent squid proxy server. Internet is connected to eth0(192.168.0.100) and lan is connected to eth1(192.168.200.0/24) and eth1 ip is 192.168.200.1 .
I have configured it as dhcp,squid and its working fine.
Now I want to configure it as a transparent,so that no one has to manually configure in browser.
I just added a line
Code:
http_port 3128 transparent
to make it transparent.
Now while adding nat rules,
Quote:
iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128
code....
Internet is totally blocked on eth1. And after stopping the firewall the internet comes.