Fedora Networking :: 13 - NFS Mounts Fail ?
Jun 13, 2010
I have upgraded three machines to Fedora 13.
On all of them any attempt to mount an nfs drive fails with:
Code:
This happens immediately - within a few tenths of a second at most. It happens whether I use mount -a(mounts are listed in the fstab file) or a full mount command. It happens on both 32-bit and 64-bit installs.
Nothing appears in the messages log file on either the server or the client machine.
It was working in Fedora 12.
Iptables and ip6tables are both disabled. nfsd is running.
Hosts.allow and hosts.deny both exist on the client, but are empty. They contain nothing but comment lines.
I can ping the server and run ssh shells to it. I can open Web pages in Firefox.
The server is CentOS 5.4.
View 3 Replies
ADVERTISEMENT
Nov 24, 2010
I have multiple ubuntu machines and I connect to one through an NFS share. I have done this for a few years without issue. However, since re-installing ubuntu and upgrading to 10.4 I have a problem with my system hanging when the remote shares are lost.
Basically, I can power down the machine downstairs, and my main machine then has a fit. I can not open any folders in ubuntu, nor can I shut down. If I try and shut down the system hangs, last time it hung for 8 hours before I had to kill the power.
These are the lines in my fstab
I don't know what I've done wrong, or how I can prevent this from hanging. I have googled the heck out of this as well and can't seem to find an answer either.
View 2 Replies
View Related
Feb 19, 2011
is there a "debug" method for your wireless connection. My authentication for 2 laptops Dell d600 and IBM t42 both are unable to connectreless routers (2 different ones).Fedora 14 32bit Gnome NetworkManager
View 13 Replies
View Related
Feb 15, 2009
i am confused with the wlan0 connection when i type iwconfig wlan0 in the terminal i got something like this:
[Code]...
View 2 Replies
View Related
Oct 19, 2009
I instaled HPML350 G6 server. I would like to configure ethernet fail over. I got the script from my friend and configured and restarted the network services. I am getting the error message that ""Deprecated configure file /etc/modprobe.conf, all config files belonging to /etc/modprobe.d". System automatically assigning IP address also.
View 2 Replies
View Related
Nov 24, 2010
I connected to internet via a USB wireless card, it works OK in GNOME, but it can't be detected on KDE. When enter KDE, iwconfig can not find any wlan. Wireless network connection not configured caused no wireless AP available, so the network not available. After I configured the wireless connection, The problem fixed. I'm replying in KDE now.
View 1 Replies
View Related
May 31, 2011
I use fedora 15 and everything was ok , Now on booting network manager fail and dosn't appear .Iuse gnome 3
View 4 Replies
View Related
Mar 11, 2009
I have a Mobile Broadband connection (as NetworkManager calls it) that works very well until the latest update. Now it fails to connect 99.9% of the time. When it does connect it works very sluggishly.
I didn't update a second computer I have and it still works fine here. Both run F10 x86_64, both are fully updated (except for NM on this one).
Output of grep NetworkManager /var/log/messages | tail -100 from non working machine code...
View 14 Replies
View Related
Mar 26, 2011
I am doing something wrong. Just connected Fedora 14 to the internet. I wanted to do a speed test and this requires flash. I have download the linux (yum) version and tried to install adobe-release-i386-1.0-1.noarch.rpm no idea what is needed to be done next.
View 8 Replies
View Related
May 7, 2009
I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
View 1 Replies
View Related
Jan 11, 2010
Is there way that you can specify the source address to use when mounting a remote share? I'm trying to test an application, and I need to be able to script a job that connects to a remote SMB server using different local IP addresses on the system. It would have 1 main address, and several aliases in the same subnet. The script would mount the remote server, transfer a file, then unmount, change IP, and repeat.
View 2 Replies
View Related
Jun 22, 2011
I`m using cifs to mount a windows 2008 server share. I`m mounting it read only and using an rsync script which works quiet nice.
Recently I couldnt mount the windows share anymore, i didnt know the account iam using would go inactive if i never logged in.
Just where does cifs write a log if it can`t mount a windows share? If I knew where it is it would also be easier to find the reason if it doesn`t work.
View 1 Replies
View Related
Jul 10, 2010
Here is my entry in the fstab:
192.168.1.11:/mnt/array1/Our_NAS media/Our40NAS nfs auto,_ne
tdev,rw,hard,users,intr 0 0
Upon reboot, sometimes it would mount automatically and sometimes it would not. I have not discovered any specific pattern. It is very random. Sometimes it would go many reboots without mounting and on the next it would mount it. I tried putting timeo paramter, played with the parameters, but still have the same issue. My laptop is connected to a wireless network. When I do mount -a or if I go to Places everything mounts great. It just simply will not mount all the time automatically upon boot, and after wireless connection is established.
View 6 Replies
View Related
Mar 10, 2010
I have a Buffalo Drivestation (model HD-CELU2, 1tb) attached to my network.From my ubuntu desktop I can go to the menu, select "connect to server", put in the ip and share info, and it mounts perfectly.I can open the share and browse eadwrite, but when I try to mount it from a terminal or within fstab, it will still mount, but I cannot see any files that are on the drive. I have about 12gb of data on it, but like I said when I mount it using "mount -t cifs 192.x.x.x/share blah blah blah" I do not see any of the files.If I do a df I can see that the drive has files on it based on the free space available, but if I do an ls nothing shows.
View 7 Replies
View Related
Dec 15, 2010
I am trying ti set up a NFS server using the guide on [URL] However, the NFS mounts on the client side as a read-only file system, so I cannot modify nothing. Here is my /etc/export file on the server side:
Code:
/home/acrocephalus/ 192.168.1.35 (rw,async,no_root_squash)
and this is my /etc/fstab file relevant line on the client side
Code:
192.168.1.33:/home/acrocephalus/ /home/acrocephalus/AcrocephalusServer/ nfs rsize=8192,wsize=8192,timeo=14,intr
Then, I mount the system using the command
Code:
sudo mount /home/acrocephalus/AcrocephalusServer/
.
how to mount the NFS with full read-write permissions?
View 3 Replies
View Related
Jan 31, 2010
My Debian Lenny server crashed today for some inexplicable reason, and now one of my machines refuses to mount NFS shares on bootup. Manual mounting works fine. It's just one machine; the others are still mounting normally.
View 2 Replies
View Related
Oct 29, 2010
Our organization uses OpenSuSE servers (NFS/LDAP/SAMBA/more...) and are in the works migrating all the workstations for users to SuSE from Windows as well.
I like how in windows the mapped network drives are all listed in My Computer. OpenSuSE has a similar "My Computer" that lists current drives, and general PC info (in KDE, which is what we use in the office). Is there a way to list mounted drives in here, so that users can easily find the network drives? I'm open to alternatives to listing it in SuSE's sysinfo page, as long as it doesn't mean telling my old school windows users, "oh yeah, all your network drives are in /mnt/shares/...they wont have a CLUE what that means. It HAS to be easy for them to navigate to.
My attached image is just a screen shot of SuSE's "My Computer" so you can see where I would ideally like to put the shares.
View 1 Replies
View Related
Apr 9, 2009
Ive seen this a hundred times while searching google but I can't seem to get any of the fixes suggested to work for me.
Here are the specs code...
I have other servers on the same network with the same software/hardware that never loses its mount to the windows share, and nightly backups are run through those mounts. So why does the mount on this machine fail when we do a push? The only conclusion that I can come to is there is some sort of time out on the windows server that causes this. The other servers that have this same type mount use their share every night, where as the share on this server gets used once or twice a week. Once the mount hangs I can not unmount it, I have to reboot the server. Once the server is rebooted the push works fine. But then the next week when a push is tried it hangs. What else can I check?
UPDATE: I've also tried NFS mounts and autofs mounts and they hang as well
I enabled logging by echo 1 > cifsFYI and this is what I see in var/log/message code...
Ive removed the actual file names for security concerns. Any one have ideas as to why this is happening? The only other thing I can think of to try is to swap out the NIC but it's at a remote location so I can't do that right now.
View 5 Replies
View Related
Feb 8, 2011
I am running Fedora 14 with kernel 2.6.35.74 x86_64 and I am having an issue with a Vfat partition that is shared with Windows 7 on a dual boot setup. this partition contains my mozilla profiles and it occasionally mounts as read only in Fedora. I wont be able to write to it and root doesnt seem to be able to write to it when this happens. I checked this by trying to redirect an output of ifconfig. My fstab entry looks like this.
Code:
UUID=5830-75A8 /home/joe/share_storage vfat rw,umask=0000,uid=500,gid=joe 0 0
and ls -l
Code:
drwxrwxrwx. 8 joe joe 4096 Dec 31 1969
These two (fstab and ls -l) always look the same whether the partition behaves as read only or not.
View 5 Replies
View Related
Feb 10, 2011
I am trying to get NFS mounts working properly using autofs, but I'm only getting partially results. I have an auto.master set up for indirect mounts and a list of map files for each entry. Forgot to mention that when I mount the directory using /etc/fstab or setup a direct mount in /etc/auto.master I can see files in the mounted directory...
View 10 Replies
View Related
Mar 10, 2011
I need to mount tmpfs partitions to /etc & /var and unpack archieves of this folders there. This task is complete working on Gentoo with monolite kernel & handmade initramfs script. But on fedora this method is like hacking. And not pretty for later upgrades, etc... I think, may be it is need to create script in /etc/init.d/ with high run priority. But this method takes many errors on boot. It is need to mount two tmpfs partitions to /etc/ & /var & unpack archieves. All this processes are to be executet after switching init from initramfs to realinit. But before first system processes try to start. How to complete this task with fedora way?
View 1 Replies
View Related
Aug 11, 2011
I'm building a lab of fedora 14 machines that are supported by an RHEL/CentOS 5.6 server. Everything was working fine yesterday, but today ypbind can't connect to the server and nfs mounts fail with this message:
mount.nfs: mount(2): Operation not permitted
mount.nfs: trying text-based options 'addr=10.9.1.6'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: portmap query failed: RPC: Remote system error - No route to host
I can ping the server from the client using FQDN and ip address.
View 8 Replies
View Related
Feb 16, 2009
just about to install Fedora 10 on my MSI WIND laptop and read abit about file system on Linux and come across alot of recommendations on how many logical mounts or partition to create..so far i have created /boot of 100MB.i'm unsure of what sizes i will give to my [root] / and /home and /swap
i am thinking of assigning 1GB to /swap which leaves me with 40GB left for / and /home.i'm going to install alot of softwares and probably try out wine as well.i want a separate /home directory incase i change distro then i'll keep it... where does the programs go to under?
View 4 Replies
View Related
Oct 15, 2009
In trying to get rid of GPT I somehow hosed my flash drive - now when plugged in and I run df - I see tempfs /dev/shm - is there anyway I can somehow repartition, reformat my flash drive ?
View 1 Replies
View Related
Mar 17, 2009
On our network, we authenticate our users via LDAP and use autofs to mount their home directories. This works fine in Fedora 8. However, in Fedora 10, when the user logs in, it also mounts the home folders of the users that previously logged onto the system as well. This is what I see when I login as "user1" on Fedora 10
[Code]...
View 2 Replies
View Related
Jan 19, 2010
I have installed Fedora 12 i686 Live to a 200 mb partition on an external drive. Before the install I created a 6.7 GB ext3 partition and a 45 GB ext3 partition. The live cd copied the image to a 200 mb partition.
partition 2bce0f9d-53a6-4ec2-b5ad-1a6915c74260 is 45 GB
partition 4683EB23BED2EB34 is 102.6 GB NTFS
partition b7240ff1-0807-42ba-e172-bff5872519ad is 6.7 GB
[code]....
Will creating an entry in fstab sdb6 and sdb8 allow the fedora distrib dvd to install to the external hd? How do I create the entries?
I have a raid0 hd with windows xp pro. When i try to shrink the partition using anaconda, I get a disk error and the comper locks up. I have to shut off the ups to reboot.
View 11 Replies
View Related
Jun 25, 2010
I am working from RHCE Study Guide 5th Edition by Michael Jang. Lab 1 for Chapter 6 says that I should be able to mount a remote NFS share as an ordinary user under their home directory.
However, mount requires root unless it's defined in /etc/fstab with the appropriate options. So would the following never work for a user?
Code:
I could define it in /etc/fstab, but then I would have to specify a "general" mount point for the mount, like /mnt/nfs and not specific to a user like the lab suggests above.
Is the book wrong on this? Even the answer for the lab makes no mention of using fstab to mount as non-root user and the above command is correct according to the solution.
View 2 Replies
View Related
Apr 3, 2010
I'm on an Acer Aspire One.Clean install of 9.10.I was using 9.10 and my wireless was working fine.Then for no reason it would not connect.So I decided to reboot my router and reinstall ubuntu.Still does not work.I have figured out that it seems to be WPA encryption that is at fault.When I turn it off on my Linksys the netbook connects fine, turn it back on and nada.
if i try to use a static address then the laptop seems to connect but I cannot ping the router or get to the internet.If anyone has any ideas I would be grateful, I would rather use WPA than WEP.My iphone connects and this netbook connects with Windows, so I know the linksys is not at fault.
View 3 Replies
View Related
Dec 23, 2010
When there's a power fail I can't start my pc in WOL but i've to start it manually.there's a soluction?
View 8 Replies
View Related
Dec 23, 2010
I have a DSL connection, DHCP, able to browse and no problem with that.
But I can't ping websites or their ip address. Should I be worried? I'm using Maverick through Wubi.
View 1 Replies
View Related
