Fedora Networking :: Get A Second Computer Up Using The WUSB54G Network Adapter Chipset 1915:2234?

Sep 26, 2009

I have only been using Fedora for a month. I am trying to get a second computer up using the WUSB54G network adapter chipset 1915:2234. But the NetworkManager does not recognize it and it does not come up in the list of adapters when I try to add it.

View 8 Replies


ADVERTISEMENT

Ubuntu Networking :: Alfa Network AWUS036H USB Adapter Chipset Realtek 8187L Disconnects

Sep 13, 2010

I have Ubuntu 10.04 (32 bits) and a wireless usb adaptor Alfa Network AWUS036H with Chipset Realtek 8187L. After a few minutes connected, the adaptor disconnects and I can't reconnect again. I search this forum but I'm not sure about what to do. Do I need to get and install another driver? I need to use the windows driver?

View 5 Replies View Related

Ubuntu Networking :: WUSB54G V4 Wireless Adapter - Continues To Slow Down To Crawl

Sep 6, 2010

I have a number of computers working just fine on my wireless network so I don't believe it is a router issue. I am running 10.04 on a dell gx280. I plug in the WUSB54g and ubuntu sees it and it connects to the internet just as it should. I can surf the internet thruough different browsers, and although a little sluggish, it works just fine. The problem is when I download a file. It starts out working as it should but continues to slow down to a crawl. Update manager had a 54MB update, it started out downloading, but then said it would take 2 hours so I just cancelled. I have several WUSB54g's and they all have the same issue. I changed to a different type of adapter, and the update manager only took a couple of minutes.

View 3 Replies View Related

Ubuntu :: Get A Linksys Wireless USB Network Adapter WUSB54G To Work On Ubuntu 10?

Jun 5, 2010

I'm trying to get a Linksys Wireless USB Network Adapter WUSB54G to work on Ubuntu 10.

View 4 Replies View Related

Fedora Networking :: WUSB54g Stopped Working - How To Make It Work

Feb 17, 2010

My wireless adapter stopped working randomly the other day. I think the last time it was working was right before I put the computer into hibernate for the first time. it stopped working even after restarting.modinfo p54usb shows (I'm leaving out information that seems irrelevant because I can't copy and paste without the internet, so I'm typing what I see from another computer)

firmware: isl3887usb
firmware: isl3886usb

dmesg | grep firmware doesn't seem to show any requests for firmware related to it. lsusb shows something like

bus 002 device 001: ID... linux foundation 1.1 root hub
bus 001 device 003: id... linksys wusb54g wireless adapter

[code]....

When I start up, in boot messages I get something like this

WARNING deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING all config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release
Device wlan0 does not seem to be present, delaying initializtion [FAILED]

View 14 Replies View Related

Fedora Networking :: Wireless-G USB Network Adapter Setup For 12

Jul 14, 2010

To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?

View 1 Replies View Related

Fedora Networking :: How To Create Virtual Network Adapter

Nov 11, 2010

I m facing problem in creating virtual network adpater. I want to have multiple mac address for a single NIC.

View 2 Replies View Related

OpenSUSE Network :: Wireless Usb Adapter Freezing Computer WUSB54GCv3

Feb 1, 2010

Let me start by saying that with the previous kernel 2.6.31.5 when I opened network configuration, it didnt even recognize my card when i'd go to modules. After I updated to 2.6.31.8 it didnt recognize it until I installed the ralink-firmware 1.1.3.5. After that I could configure it using rt2870sta setting in modules. But once I restarted it would freeze after a few seconds after I could see the desktop on startup. I reconfigured the card to be 'manually' powered, but now it just freezes when I click on the access point I want to connect to. When it freezes the caps lock and scroll lock start blinking and the only way to turn off is holding the power

View 2 Replies View Related

Debian :: USB-adapter With The Chipset Atheros AR9271?

Mar 29, 2011

I am preparing to install Debian. I use an USB-adapter for wireless network access, the chipset of the network card in the adapter is "Atheros AR9271". Using this adapter is my only means of accessing the internet.

For some reason I had a hunch that my adapter might not be supported in Debian. I started searching around and found that quite a few people have been having some difficulties installing it to work in Debian. So, when I will have installed Debian there seems to be a significant risk I won't be able to go online.

Since I don't have any other way of connecting to the internet, thus no other network card and no parallel computer to use, I will get in trouble when I have to try to get my adapter to work with Debian. That is to say, it will be impossible to search for solutions on Google, ask for help online etc. I want to forestall such a situation. Hence a few questions:

1) What exactly will I have to do in order to be able to use the adapter with Debian?

2) Is there any way of doing it without going online after I have finished installing Debian? I'm thinking about if it would, for example, be possible to include any required files in the installation package I will use to install Debian?

View 2 Replies View Related

Ubuntu Networking :: How To Install Wireless Adapter Onto Computer

Jul 8, 2011

Was wondering if anyone had a idea on how to install this wireless adapter onto a computer thats running Ubuntu. I don't have access to a direct connection so that won't work. So I need a way that I could install it without internet, I do have access to another computer that i could get files off of if needed.

View 5 Replies View Related

Fedora Networking :: Atheros AR2413 FC10 - D-Link Wireless Adapter Worked Fine With Network Manager Disabled

Mar 3, 2009

I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.

[Code]....

View 5 Replies View Related

Fedora Networking :: Connect The Network Where The Openvpn Client Is,throught The Computer With The Client To The Other Network?

May 20, 2009

I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface

View 2 Replies View Related

Ubuntu Networking :: Linksys WUSB54G - Hook Up Through Wireless With Device

Dec 14, 2010

I have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).

View 1 Replies View Related

Fedora Networking :: Program That Notifies When A Computer Connects / Disconnects From Network?

Jan 10, 2010

Is there any application out there for linux that can notify me of when a new IP address connects or disconnects to my network?

View 5 Replies View Related

Ubuntu Networking :: One Computer Sees Network, The Other Computer Doesnt?

Nov 11, 2010

My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.

View 2 Replies View Related

Ubuntu Networking :: Linksys WUSB54g V4 - Disconnect And Require Me To Unplug The Device?

Jun 1, 2010

Bus 001 Device 008: ID 13b1:000d Linksys WUSB54G Wireless Adapter
wlan1 Link encap:Ethernet HWaddr 00:18:f8:33:91:7d
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0[code]........

It is the linksys WUSB54g V4, im assuming it runs on the rt2500 chipset,when im connected and working it runs fine, however if i try to let a download run, it generally will disconnect and require me to unplug the device and plug it back in to get it working again, i cant just reconnect if i do that it simply wont connect, im connecting to a linksys router with the most recent firmware i think its the wrt54g v7, its setup using a wpa personal password and im connected through manual entry of my ip address due to port forwarding for some of my games, however the same issue persists even when im connected through an automatic configuration.

View 1 Replies View Related

Networking :: How To Find Ip Address Of Other Computer In LAN Network From Own Computer?

Jun 7, 2010

i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....

View 4 Replies View Related

Networking :: Network Adapter Down

Sep 14, 2009

A node on a cluster that our lab has had sitting in a dusty room since time forgotten does not seem to want to talk to the rest of the world any more.Following is the information I found was being asked for on other posts for similar questions, transcribed by hand.

View 6 Replies View Related

Ubuntu Networking :: Broadcom 802.11g Network Adapter?

Jan 3, 2010

Basically a few weeks ago I decided to try Linux, in particular Ubuntu. I have it installed in my Windows 7 partition but now I am willing to take the full plunge and switch to it all the way. The only issue is I cannot connect to wireless internet. It states "device not ready". Wireless is turned on on my laptop, I am very near the source, have tried making a manual connection with the network setup. I tried the hardware tester and it found my ethernet and wireless hardware (Broadcom 802.11g Network Adapter).
I went to the package thing and looked for Broadcam. I found a package but it was already installed. I tried it manually with:

sudo apt-get install bcmwl-modaliases
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?

I then heard to try "sudo apt-get install bcm43xx-fwcutter" and did but it couldnt find it.As stated before I am new to linux so I'm probably missing something easy I just beg your patiance as I learn this new operating system.

View 4 Replies View Related

Ubuntu Networking :: Cannot Connect Via USB Network Adapter

Jan 7, 2010

I have a Belkin N150 USB Wireless Network Adapter and a Belkin N150 Wireless Router. I cannot seem to get NetworkManager to connect to the internet. I have blacklisted the 9.10 staging driver and associated rt files. I have downloaded and built the ralink 2.3.0.0 driver. The light flashes on the usb but I cannot connect to internet.

lsusb output:
jerry@jerry-desktop:~$ lsusb
Bus 002 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:09c2 Logitech, Inc.
Bus 001 Device 005: ID 050d:935b Belkin Components
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsmod output:
jerry@jerry-desktop:~$ sudo lsmod
Module Size Used by
rt2870sta 554908 1

iwconfig output:
jerry@jerry-desktop:~$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ra0 Ralink STA ESSID:"11n-AP" Nickname:"RT2870STA"
Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thrff Fragment thrff
Encryption keyff
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

I am not sure what the ra0 is telling me but what about the Access Point: Not-Associated statement? Does that mean that the network adapter is not connecting to the router?

View 1 Replies View Related

Ubuntu Networking :: Setting Up USB Network Adapter?

Apr 20, 2010

I'm trying Ubuntu for the first time; it's actually the first time I've messed with Linux at all-- and, well, it's kind of intimidating. One of my hobbies is playing with dead computers, and long story short, I have Ubuntu installed to a partition on an external drive connected to an older Dell desktop with no internal storage to call its own. The only network adapter I have to spare right now is the rather wimpy USB one that came with said desktop. I have the CD with the drivers to it, but I think the Linux drivers on it are for a different distribution. Am I going to need to scrounge up another network card or adapter, or am I going to have to start sheepishly asking ridiculous questions regarding basic operation of the command console?

View 4 Replies View Related

Networking :: Get USB Network Adapter To Work In Mint?

Dec 15, 2010

I used Several Distos, went to school up to Linux 225, but haven't used Linux for years. I have an older (P4, Win xp) laptop I use at the coffee shop. I want to put Linux Mint on it. I use a USB Adapter (Arilink101 AWLL6075) for Wi-Fi. I tried the live CD and, of course, USB Adapter doesn't work. In the half hour I looked at it, I realized I forgot a lot of things. I could not even find the laptop USB. Will tring to get it to work be the typical Linux thing, where you download the drivers, do the install right, and it doesn't work? You compile drivers, set everything up right, and it doesn't work?

View 14 Replies View Related

Ubuntu Networking :: Make Changes To Network Adapter Persistent?

May 12, 2010

I have a crappy cat5 cable that only works at 10BaseT settings on any nic. I have a gigabit nic which I configure using;Quote:ethtool -s eth2 speed 10 autoneg offProblem is that this setting doesn't stick after a reboot. How do I make the change permanent?

View 4 Replies View Related

Ubuntu Networking :: Finding Drivers For Network Adapter?

Jun 30, 2010

I've installed it and it looks great. my problem is that I cant connect to the net since I could not find the driver for my onboard network adapter. it is a Gigabyte GA 945 GCM S2L board. of coarse I searched their site but it says that Linux driver I have to achieve from 3rd party. the adapter's chipset is a Realtek RTL 8111C but I could not find the driver for it. the only one that I've found - doesn't work. I must point out that when I've searched driver for my Nvidia display adapter- I've found it on Nvidia's site and it works great.

View 2 Replies View Related

Ubuntu Networking :: Wireless Adapter Cannot Connect To Any Network

Aug 31, 2010

I have an HP Pavilion dv5 1002nr laptop running Vista. I decided to install Ubuntu using the windows installer, which did install well, but I decided that it wasn't for me, and uninstalled it. Now, my wireless adapter which is a Atheros AR5007 802.11b/g can see the network, find networks by itself, and is supposedly installed correctly according to Vista, cannot connect to any networks at all despite being able to see them and acquire a signal strength. Up until installing Ubuntu I have never had an issue like this. Other devices have no trouble connecting to this network, and I am currently using a Netgear wireless usb dongle to connect to the very network that my Atheros can not connect to.

View 2 Replies View Related

Networking :: Virtual Network Adapter With Multiple Mac Address

Nov 10, 2010

Is it possible to create virtual network adapter on the same physical network adapter? or How to give or have multiple MAC Address to the same adpater? I m working on centos 5.3.

View 6 Replies View Related

Networking :: Installing Ubuntu Botched Network Adapter?

May 18, 2010

On my desktop, I have Windows 7. I just also installed ubuntu on a partition in order to dual-boot. The installation worked fine, however now I cannot use the internet on either os. I have a Realtek PCIe GBE Family Controller On Windows 7, the LAN flashes from "Enabled" -> "Identifying" -> "Network cable unplugged". It does this on a seemingly continuous loop. When I disable it, it will not let me enable it. It says it can't start. Also, I uninstalled and re-installed the driver for my ethernet with no change.On Ubuntu, when I try to do "ifconfig eth0 up" and "dhclient eth0" I get the message "No DHCPOFFERS received. No working leases in persistent database - sleeping."

View 5 Replies View Related

Networking :: Unable To Set Gateway When Second Network Adapter Fitted

Feb 12, 2010

When a second network adapter is fitted, the boot script fails to configure the default gateway. Here's from /var/log/messages with DEBUG_ETH_UP="yes" configured for the boot script Code: Feb 13 10:22:23 ps1 logger: /etc/rc.d/rc.inet1: /sbin/route add default gw 191.168.1.1 metric 1 Feb 13 10:22:23 ps1 logger: SIOCADDRT: No such process

After boot the same command failed with the same message when done by root logged in via ssh but succeeded when run from the console After removing the second network adapter, the boot script is able to configure the gateway.

EDIT: or not. The problem now seems intermittent Now with only the onboard network adapter the same "SIOCADDRT: No such process" error is logged during boot and the "/sbin/route add default gw 191.168.1.1" command fails at the console too. Am experimenting with disabling the onboard adapter and fitting the NIC.

EDIT 2: definitely intermittent. Just rebooted with no hardware changes; same error during boot and route -n showed no default gateway but "/sbin/route add default gw 191.168.1.1" worked.

[Code]....

View 1 Replies View Related

Fedora Networking :: Broadcom 4321 Chipset Not Working - Wlan0 Never Shows Up

Jul 3, 2010

I am still encountering problems getting the Broadcom 4321 chipset to work on my Fedora 13, even after using this guide, this guide and another guide on ndiswrapper.

To answer the standard questions:

Code:

Code:

Code:

Code:

and finally

Code:

But no wlan device or anything else.

View 2 Replies View Related

Fedora :: KVM Dedicated Network Adapter

Nov 27, 2010

The Fedora 13 Visualization guide mentions the ability to use "shared physical device" to give virtual guest full access to a network device. Where can I find more info on setting this up. When installing my first guest, the drop down menu didn't supply this as an option. Eth0 and Eth1 were not selectable (e.g. grayed out).Is there a better section to ask KVM related question? If so, I'll move there.

I'm setting up my first KVM guest now, played aroudn with VMware briefly. I did spend a lot of time wtih VM on mainframes (yes, I'm old)... and from my research, KVM is "catching up" with what we could do in the old days.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved