Ubuntu Networking :: Linksys WUSB54g V4 - Disconnect And Require Me To Unplug The Device?
Jun 1, 2010
Bus 001 Device 008: ID 13b1:000d Linksys WUSB54G Wireless Adapter
wlan1 Link encap:Ethernet HWaddr 00:18:f8:33:91:7d
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0[code]........
It is the linksys WUSB54g V4, im assuming it runs on the rt2500 chipset,when im connected and working it runs fine, however if i try to let a download run, it generally will disconnect and require me to unplug the device and plug it back in to get it working again, i cant just reconnect if i do that it simply wont connect, im connecting to a linksys router with the most recent firmware i think its the wrt54g v7, its setup using a wpa personal password and im connected through manual entry of my ip address due to port forwarding for some of my games, however the same issue persists even when im connected through an automatic configuration.
View 1 Replies
ADVERTISEMENT
Dec 14, 2010
I have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).
View 1 Replies
View Related
May 13, 2010
this card has notoriously horrible linux support; how to fix this and nobody ever seems to get it work. But it was working natively on ubuntu, so I know it can be done. I just don't know *how*. I downloaded the isl3890usb firmware, placed it in /usr/local/lib/firmware or whatever the path was in the guide. Soon after, iwconfig was giving me an interface! However it stopped working at this point. I tried iwlist wlan0 scan, but it always just says "no scan results." I manually configure everything and dhclient just tells me "no offers recieved." It appears to have an interface but is just not working at all. Where do I go from here?
View 2 Replies
View Related
Jun 5, 2010
I'm trying to get a Linksys Wireless USB Network Adapter WUSB54G to work on Ubuntu 10.
View 4 Replies
View Related
Sep 6, 2010
I have a number of computers working just fine on my wireless network so I don't believe it is a router issue. I am running 10.04 on a dell gx280. I plug in the WUSB54g and ubuntu sees it and it connects to the internet just as it should. I can surf the internet thruough different browsers, and although a little sluggish, it works just fine. The problem is when I download a file. It starts out working as it should but continues to slow down to a crawl. Update manager had a 54MB update, it started out downloading, but then said it would take 2 hours so I just cancelled. I have several WUSB54g's and they all have the same issue. I changed to a different type of adapter, and the update manager only took a couple of minutes.
View 3 Replies
View Related
Feb 17, 2010
My wireless adapter stopped working randomly the other day. I think the last time it was working was right before I put the computer into hibernate for the first time. it stopped working even after restarting.modinfo p54usb shows (I'm leaving out information that seems irrelevant because I can't copy and paste without the internet, so I'm typing what I see from another computer)
firmware: isl3887usb
firmware: isl3886usb
dmesg | grep firmware doesn't seem to show any requests for firmware related to it. lsusb shows something like
bus 002 device 001: ID... linux foundation 1.1 root hub
bus 001 device 003: id... linksys wusb54g wireless adapter
[code]....
When I start up, in boot messages I get something like this
WARNING deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING all config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release
Device wlan0 does not seem to be present, delaying initializtion [FAILED]
View 14 Replies
View Related
Sep 26, 2009
I have only been using Fedora for a month. I am trying to get a second computer up using the WUSB54G network adapter chipset 1915:2234. But the NetworkManager does not recognize it and it does not come up in the list of adapters when I try to add it.
View 8 Replies
View Related
Feb 27, 2010
I have installed Canon ImageRunner 2018i on my linux box using CUPS web interface. When I try to install this as a network printer from a Windows XP machine, the windows XP machine keeps asking me for a device driver. Is there a way to configure the printer on CUPS/Samba so that when I try to install it on Windows XP machine as a network printer, it does not ask me for a device driver?
View 7 Replies
View Related
May 27, 2011
I started a fedora 15 live cd last night, and at the top right corner, i noticed that wireless was not active. Right mouse button on the internet icon showed me that fedoar recognized the usb device as it is,, a Linksys WUSB600N wireless lan.
However, fedora warned me that the firmware was not available, therefore i was not able to configure the WUSB600N. To be specific,, it's the V2 version.
My question is,, does this device work with linux fedora? i assume that i need to install the required firmware in order to use the device.
View 6 Replies
View Related
Sep 25, 2010
Periodically, about 3 to 5 hours, Ubuntu disconnects from my wi-fi network and doesn't reconnect until I restart the router.This is an Ubuntu specific issue, since it doesn't happen when I boot into my Windows partition, and it doesn't happen to other computers on the network.
View 2 Replies
View Related
Feb 25, 2010
use kubuntu 9.10 64-bit on AMD Turion M500 machine.The network keeps disconnecting periodically or on some heavy activity The connection is totally stable on windows 7 though.My doubts point to network manager and so my next step is to switch to command line wpa_supplicant
View 1 Replies
View Related
Mar 3, 2010
I use network-manager-pptp to connect to my VPN server. However, occasionally my VPN drops out (although my Internet stays up). I was just wondering how I could make the VPN drop-out trigger a bash script, for example playing a sound to alert me that the VPN has dropped?
View 1 Replies
View Related
May 29, 2010
I tough that firefox was the problem of my very slow web sites loading, but I am suspecting that sometimes the internet connection is the reason, maybe for some reason that I don't know it can not just connect to the site.I am running Linux quick-desktop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux.when I browse the web it is very slow to load.sometimes I get this error message.Could not locate remote server.Even I know the site is up running like google.
View 6 Replies
View Related
Nov 22, 2010
A month ago I had (and still have) a weird problem were leaving my switched off computer plugged into the network killed the whole network.
[URL]
well I have found a fix, if I disconnect my computer via software (Right click and disconnect "eth1" and shut down the network will remain up. I want to make a script that runs on shutdown that simply disconnects "eth1". Are there any pre-made shutdown scripts in ubuntu that I can simply add "eth1 enabled = 0" or something.
View 4 Replies
View Related
Jan 18, 2011
I've simple PPTP connection in NetworkManager that is build in with ubuntu, once I disconnect the connection [to change IP or so] the connection won't establish again...
I'm getting a libnotify popup that says "Connection failed because timeout"
I'm getting a good IP, I just can't connect again after 1 disconnect...
Any idea why?
View 1 Replies
View Related
Jul 19, 2011
i installed linux at home on my laptop (dv2000, hp). Because i was having problems connecting to the internet through wireless. And wired at friends houses.So installed linux. Wireless took me a while but finally got that working. Now the problem i have is that wired is not working apart from at home. Any other router apart from mine it cannot connect to.
View 2 Replies
View Related
Aug 27, 2011
I have an asus eeepc 1015pem with the builtin wireless adapter..
[Code]....
and it seems to work ok connecting to the network for the most part. but when i start pushing decent traffic like with an scp copy of many files, the network will disconnect after a few seconds. with the following
[Code]....
ive searched and searched, but cant seem to find out what the heck is wrong with this silly thing..
[Code]....
View 2 Replies
View Related
Mar 22, 2011
The combination "~." disconnects SSH session. But if I enter "~" twice, I won't be able to use this combo again to disconnect. Can I get this combo to work again within one SSH session if I typed in the "~" twice?
View 1 Replies
View Related
Jan 9, 2010
I have a cisco linksys wireless adapter (WUSB600n) which, most of the time, great when booting up. But mostly after some time (1min- 1hr.) it disconnects. When checking the status I can see some of the networks around me, including mine. But selecting it doesn't do anything. I searched the forums and tried:
sudo dhclient
and
sudo /etc/init.d/networking restart
But still no connection; the only thing that helps is rebooting.
View 2 Replies
View Related
May 19, 2010
I have my internet connection via a wireless USB adapter and that works fine. Recently I connected my pc (Ubuntu 9.10) through a wired switch to my modified xbox so I can watch my videos in my office. I can share my content with my xbox (except for the items on my external USB HD's - I am working on that and will post that question elsewhere) but when I have my PC's wired connection plugged into the switch I can not surf the web or check email. It gets stuck at resolving host and then times out. If I disconnect the pc from the switch it sometimes connects before it times out. Usually it is quicker if I reboot without the wired intranet connection.
View 1 Replies
View Related
Jun 7, 2010
I have 2 nic cards. One I use for my LAN and the other for my WAN (ftp, web). I am using a fresh install of Ubuntu 10.04 LTS. If I disconnect the WAN I can download packages (apt-get), ping etc. If both nic cards are active I cannot do either. This behavior is the same whether or not iptables is enabled. BTW I am using the server version. I was only able to find examples that used a GUI, nothing from the command line.
[Code]...
View 1 Replies
View Related
May 15, 2011
what is the command in the terminal to connect to and disconnect to interneti have mobile broadband usb modem
View 5 Replies
View Related
Jan 19, 2010
I am checking something out in my connection and i just wanted to ask, is there a way to auto-disconnect and connect from the internet, for example say I want to disconnect now and reconnect to the internet in 0.05 seconds, is there any program that does that?
View 1 Replies
View Related
Nov 27, 2010
i use ppp to connect to a VPN, and i need it to auto reconnect when i looses connection. How do i make it work?I use Debian.
options.pptp settings:
lock
noauth
[code]....
View 1 Replies
View Related
Jul 20, 2010
do not post such long blocks of messages directly on the forums. Attach the output as .txt or use a pasetebin.
View 5 Replies
View Related
Jul 31, 2010
I recently installed Ubuntu 10.04 on my Acer TravelMate 3270 notebook (with Windows 7 dual boot) for everyday use. All is great except i started to notice my Wireless Network get disconnected and then reconnects every 5 minutes or so. Also the NetworkManager Applet 0.8 keep annoying me with the notifications that its disconnected and then reconnected.
I do not have this issue while using Windows 7 (in the same area). Can this be fixed. As i really want to move my day to day computing need to Ubuntu.
View 1 Replies
View Related
Sep 28, 2010
I installed Red Hat Eterprise Linux 5.4 Server on my HCL Server machine.I use a static IP for my server. The problem is the network connection is automatically disconnected for some times and it again connected automatically after some time. It happens in periodic manner.I check my cable, port and connection.Those works fine in other PC
View 7 Replies
View Related
May 2, 2010
Since I upgrade to Ubuntu 10.04 my wireless connection is very unstable. I install the needed wireless drivers from 'Hardware Drivers' (Broadcom STA wireless driver) and I got wireless connection, but it randomly disconnect, and also connection is very slow.
I think that the problem are the drivers which are not very compatible with this version of Ubuntu, which means we need to wait for update? I have HP ProBook 4510s laptop, Intel PRO/Wireless 5100 AGN network card & Gembird NSW-R2 router. I'm only having this problem on Ubuntu 10.04, on other OS's the internet is fine.
View 7 Replies
View Related
Aug 6, 2010
I have a usb wireless card called "edimax ew-7318" i used it for a year and it was great- worked out of the box. recently i've been having repeating disconnect problems every few minutes or seconds it will disconnect and then reconnect again
In system log i get:
Code:
It seams like a physical hardware problem but i cant find any physical fault on the card itself.
View 4 Replies
View Related
Jun 26, 2011
I was happily running Ubuntu 9 but since I cannot get security updates for it anymore I had to upgrade to 11. Now I'm on Natty, and the "NetworkManager" apparently cannot deal with my latop's wifi card which worked fine for years under ubuntu 9. The laptop is a Dell latitude D610 and the card is an intel ipw2200 minipci. I used to just run /etc/init.d/network restart after I logged in to get the wireless to come up, if it failed by itself, but now I get a message that that's deprecated. Nice.
I'm running WPA. If I don't create a wireless configuration in the network manager, wireless never connects. Ever. If I do create a configuration, the connection comes up for about a minute, and then drops. And then comes up. And then drops. And then comes up. And then drops. It's insane. Also, I get a series of "Auto <ssid>" entries in the NM settings area.I dug around in /var/log, but all of the wpa_supplicant logs are of size 0, except the gzipped backups, which are all size 20. Go gzip. The syslog has some messages in it about 4-way handshake failed, and association taking too long, but since the laptop has no network connection I don't have an easy way to post those here.I just want the wireless to come up, by itself, when I turn on the laptop like it used to. I don't want to have to deal with retyping the (long and complicated) WPA password every time I wake up the machine, nor deal with the "keychain." How do I get there?
View 1 Replies
View Related
