Networking :: Use Both Networks Simultaneously Ppp0(usb Device) And Eth0
Apr 30, 2011
I am running a CentOS 5.6 as a Virtual Machine on my Laptop. And, to connect to internet I am using a datacard (usb modem) device (Tata Photon +).
Now, internet is working well on my VM through interface ppp0
The problem is that when I start my interface eth0, internet (running through ppp0) stops.
Quote:
[root@kick ~]# ip route show
172.29.242.9 dev ppp0 proto kernel scope link src 14.99.211.189
default dev ppp0 scope link
[root@kick ~]# ip addr sh
1: lo: <LOOPBACK> mtu 16436 qdisc noop
[Code]....
View 4 Replies
ADVERTISEMENT
Apr 12, 2011
I'm a n00b with these things so be nice please XD I have recently touched on this in previous posts but never came to actually trying to fix it. I have a D-Link DSL-2640R router, with dhcp disabled. It is connected to my computer via ethernet. I have the network manager configuration set to manual with an address of 192.168.1.2, Mask 255.255.255.0 and the gateway column is blank. I would like to know why my eth0 interface seems to stop me browsing.
I use a T-Mobile HUAWEI usb mobile broadband stick, Model E1750 for internet access. If anyone has any ideas as to why this is happening please discuss them. I have also tried editing the /etc/sysctl.conf file and uncommented the net.ipv4.ip_forward=1 line to enable ipv4 packet forwarding. This has not solved my problem.
View 4 Replies
View Related
Jan 23, 2010
i want to share the internet connection from Laptop to PC via LAN crossover cable
here's how i connect to the internet in laptop, and connected PC via LAN:
i need to share pppoe(ppp0) to (eth0) , that is what i've been doing in Windows before, but i dont know how to share in Linux, i tried to follow Ubuntu Help about ICS, but it doesn't work
View 9 Replies
View Related
Jul 2, 2010
My machine has Ubuntu 10.4, installed a week ago. I'm connecting to the Internet with a Wireless 3G modem, the interface is named ppp0. Additionally, I have a network card that is connected to a home router, that's eth0. Everything works fine with eth0 disabled, all my apps can access the internet correctly. But, my issue is that when i enable eth0, i can't access the internet with any app.
So why do i need eth0 anyway? The thing is that i must share my internet connection with my sister, who is also connected to our home router. I planned to give her access by installing squid on this machine and configuring her browser to connect to squid. However, since none of my apps can connect to the internet while eth0 is active (whereas squid and all other apps work fine with eth0 disabled) I can't let her connect to squid while squid is working correctly.BTW selecting "use this connection only for resources on its network" under "routes..." of the ipv4 tab of "Auto Ethernet" made it a little better. Firefox and Xchat started to work with eth0 active. Squid still doesn't work though (althought it works just fine with eth0 disabled)
View 4 Replies
View Related
Sep 11, 2010
I just switched from Fedora 13 to openSUSE 11.3 on my laptop and so far love it...well...not quite. I'm having some major network issues. As in...no networks.
I installed everything and booted up for the first time. Everything worked great, I had wireless through wlan0 and could connect directly to my home router via eth0 with no problems. Installed a few applications and ran into some problems with hibernating/suspend modes. I rebooted and like magic, NetworkManager said networking was diabled. My WiFi light was off. Network switch on the computer didn't do anything.
I thought alright, I'll connect my ethernet cord and can go from there....problem is that won't work either. I tried searching for drivers online on my desktop, found some and transferred them via USB with no luck. They won't install. I have no idea why, or whats going on but I really need my laptop for school on Monday so it would be AWESOME to have it working by then.
Here is what I have:
Intel 5150 WiFi card
Dell Studio XPS M1640 laptop
OpenSUSE 11.3
View 1 Replies
View Related
Dec 26, 2010
i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies
View Related
Mar 14, 2011
I have two networks on a server. One being my internal network, and the other being an external IP address. This is on Debian Lenny. Here is my /etc/network/interfaces file:
I can reboot my system and sometimes eth1 is accessible from SSH, and other times eth0 is accessible. Then sometimes eth1 will just stop being pingable alltogether. This is a fairly fresh install of Debian, and the only thing I have running is VMWare Server 2.0, bridged to both of my network connections.
Here is what my route looks like:
View 1 Replies
View Related
Nov 7, 2010
This morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
View 4 Replies
View Related
Dec 14, 2010
I have to do a project on network security.For that i have to capture the packets from the device. I installed libpcap tool in ubuntu. If I give ifconfig -a it lists out eth0, wlan0, lo. I am able to connect to the internet via eth0. But when I give
#include <stdio.h>
#include <pcap.h>
int main()
{
char *dev, errbuf[PCAP_ERRBUF_SIZE];
[Code]...
It says device is null. I'm not able to run sniffex.c program also. All I want to do is to capture the live network level packets and analyse them.
View 2 Replies
View Related
Jan 31, 2011
While i am configuring network setting on backtrack4. i was running my backtrack on vmware workstation and NAT is bridged to physical mem like it was said on the tutorial that watched. i typed ifconfig eth0 up, and hit enter, as well as dhclient eth0 up, but resulted in different output. it says "no such device" is written and i would like to configre this problem.
View 2 Replies
View Related
May 5, 2010
My network name is eth2 it was changed by some reason and now i got these errors... i installed, reinstalled, re re installed, tried to run the asistant but no luck :/
Code:
* Stopping the Firestarter firewall...
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
[code]....
View 1 Replies
View Related
Dec 21, 2010
Installed Centos 5 on IBM T60P laptop. Intel 82573L Gigabit ethernet controller. Keep getting this erro message, "e1000 device eth0 does not seem to be present, delaying initialization."
View 3 Replies
View Related
Mar 29, 2010
I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:
Quote:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....
The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....
View 2 Replies
View Related
Jun 17, 2009
I have swapped out four known working, different bran network cards. Each one I get the same error as in the subject. If I boot to a Live CD such as CentOs 5.3 LiveCD both Nics are given an IP. This seems to only be happening with my CentOs 5.3 server install.I noticed the CentOS Live CD the Nics were reversed from eth0 to eth1 and eth1 to eth0.
At the moment as of the output of the commands, I am running two identical Nics, since the first one has always worked. I have previously used an rtl8139, 3com c3905-TX, onboard Rhine III based (now disabled) Here are steps I have done to try and figure this out:
Quote:
[root@centos ~]# lspci | grep -i eth
00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
00:0e.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
Quote:
[root@centos ~]# cat /var/log/dmesg | grep -i eth
eth0: VIA Rhine III at 0xee800000, 00:1b:11:bb:17:7d, IRQ 177.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[code]....
I went through the system-config-network-tui. I copied /etc/sysconfig/network-scripts/ifcfg-eth1 to the ifcfg-eth0 and edited for sanity. and as stated earlier, have swapped out four different nics for eth0, and booted to two different LiveCD's. Both LiveCD's work fine.
View 3 Replies
View Related
Aug 10, 2010
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
View 3 Replies
View Related
Jun 15, 2010
internet works with MTU=1460 for ppp0. I set this up manually using ifconfig. What changes are required so that it is done by default when PPP0 connects or at boot?
View 4 Replies
View Related
Dec 22, 2010
Wireless stopped working with version 10.10, it was fine with previous versions, now it says "device not ready". Hardware works fine under Windows, and is a Linux-friendly Asus RaLink RT2860.
View 9 Replies
View Related
Oct 28, 2010
I just setup a SuSE 11.3/64 server and I am trying to setup pptpd for a vpn. I noticed thatg the ppp0 (or any pppx) interface is non-exoisting and I think that that is the problem why my gre packages are not being sent by pptpd (as I have checked all other options). I have tcp port 1723, and protocol port 47 (gre) open on the firewall (SuSEfirewall2). I have traced the responses using tcpdump and only when the server sends gre to the remote client, the client never receives it (the 1723 connection is established). I checked the old server (SuSE 10.2) that worked the vpn fine, and the only thing missing on 11.3 is ppp0. All other hardware (routers, etc.) are the same. I suspect that pptpd tries to use ppp0 and the interface is non-existing. I can remotely ssh to the server, dns works, samba works, everything else works. Is it something I am missing? How do I create if ppp0 and link it to eth3, the internet gateway?
As always, a windoze tech crashed the old server and I had to setup the new one in a hurry, just before going on vacation, and people want this done by yesterday? They paid $$$$ to the windoze tech (who said Linux is obsolete) even after he almost brought the company down!
View 2 Replies
View Related
Nov 23, 2009
my problem is i have setup 2x ppp used for adsl to split local and international bandwidth ppp0 is using the international account and ppp1 is using the local only account this all works fine but every so often i notice when i do an ifconfig that ppp0 is dialed up on the local account and ppp1 is dialed up on the international one, and sometimes a reboot fixes it and sometimes it doesnt
my config files are the following:
# Default ADSL network config file, as used by redhat
USERCTL=yes
PEERDNS=no
TYPE=xDSL
[Code].....
View 4 Replies
View Related
May 18, 2011
I'm running 10.10 64 bit. I have a vpn service and I'd like to configure my bittorrent client to use only the vpn link (and NOT continue through my plain-old ISP service if the vpn drops). I imagine there are a few possible approaches to this:
1.have a script that checks if ppp0 is up an terminates the bt client if not
2.configure the bt client to use only ppp0 (though I tried this with qtorrent and it switches over to eth0 if vpn drops...)
View 1 Replies
View Related
Nov 18, 2010
I've looked today on my logs /var/log/message and I find device eth0 entered promiscuous mode I don't remember putting eth0 in promiscuous mode I'm connected to the net thru a router how do i turn that off ?
View 1 Replies
View Related
Nov 3, 2010
I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies
View Related
Dec 28, 2010
The problem I'm having is on a CentOS4 machine. I don't use CentOS regularly (Ubuntu and Mint, yes) so I'm not sure if this is something that is particular to CentOS or not. I have this workstation that controls a microscope controller. The drives in this computer are some POS Seagate drives where the data storage drive has already conked out more than once. I think this time there was a problem with the OS drive that caused a lot of filesystem errors. I wasn't able to boot the OS at first but I ran fsck from a liveCD and was able to fix the (hundreds of) errors and the OS can now boot from the drive. The problem ave now is the ethernet does not work. I know there's not a problem with the ethernet controllers because I can access the internet through the liveCD. When I try to activate eth0, or eth1, I get the following error:Quote:
Cannot activate network device eth0!
network-functions: line 180: ip: command not found
WARNING: /lib/modules/2.6.9-89.0.9.ELsmp/modules.symbols line 1: ignoring bad line starting with 'GROUP'
[code]...
View 2 Replies
View Related
Apr 16, 2011
I am trying to configure my android phone (rooted Eris running kaossfroyo 2.2) to be used as a midi controller. Which I am having enough trouble with as it is but it has raised an annoying issue that occurred a month ago when I used the phones tethering network with my laptop. After connecting the laptop to the phones network (either tether, or an Ad-hoc network created using the network manager) I am unable to switch to other networks. In other words when I'm done with the phone-laptop connection I cannot connect my laptop to my home network! When I click on the other network connection I can see that it is attempting to connect in the upper right corner of the desktop (the network icon) but it will not make the connection.
What happens is that the network indicator will make the little circle graphic as if it is trying to connect but it never will display the other circle as green indicating that it has connected. but when I disconnect from the home network that is not connecting I will get a message underneath that will say that ad-hoc network disconnected! If I am switching from the android tether it will say Android-Tether disconnected etc. Even though when I click on network manager it shows that I am attempting to connect to the home network (labeled LIBERTY in my case) upon disconnection it shows the ad-hoc or tether connection being disconnected.
I am absolutely baffled by this! The issue persists even after deleting the ad-hoc connection from the wireless settings tab!!! I would speculate that for some reason the laptop is attempting to connect to the previous ad-hoc connection despite me wanting it to connect to LIBERTY. I am very confused and hope someone can lead me in the right direction.
View 1 Replies
View Related
Nov 22, 2009
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
View 2 Replies
View Related
Aug 19, 2009
5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
View 17 Replies
View Related
Jul 1, 2010
I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.
My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...
The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2
Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...
I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).
View 10 Replies
View Related
Dec 18, 2010
I'm running a dual boot Ubuntu 10.04/Backtrack 4 (Ubuntu 8.10) system. I can get internet in the BT4 side but not in the Lucid side. In Lucid I can ping my router, and the network manager says I'm good to go, but I can't get to any web sites. It all started when I tried to put my laptop on another network by mimicking the settings of a computer I had just unplugged from the network. MAC address and all.
ifconfig eth0:
Code:
eth0 Link encap:Ethernet HWaddr 00:1f:16:ba:4c:8c
inet addr:10.136.9.147 Bcast:10.136.9.159 Mask:255.255.255.240
inet6 addr: fe80::21f:16ff:feba:4c8c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 3 Replies
View Related
Dec 21, 2010
is there any way to download the 'package indexes' on a seperate computer operating on windows vista, before transferring them, via usb, to my laptop working on linux 10.10. As the reason i need them is to get the wireless to work so the internet can work.
View 1 Replies
View Related
Jan 14, 2011
when I first installed it on my IBM thinkpad, the eth0 was working correctly. I had someone try to install the network card for me, and something was changed to where now the wired connection is displaying "device not managed".
View 2 Replies
View Related
