Ubuntu Networking :: 10.04 - Realtek Semiconductor Device 8192 Driver
Jun 7, 2010
I've just installed Ubuntu 10.04 on my samsung n150. It has the 8192 device in it. Have installed ndiswrapper, however cannot get the drivers for it. How to fix/where to get the driver from so I can get my wireless card working again.
On lspci:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) .....
I think the driver may be there, however I just can't 'enable' it. On my laptop there is a blue light saying that wifi is enabled however who knows.
View 3 Replies
ADVERTISEMENT
Jan 2, 2011
Bus 001 Device 002: ID xxxx:8176 Realtek Semiconductor Corp Is there driver for this wireless USB dongle? At least it does not load when plug-in like rtl8187.
View 9 Replies
View Related
Aug 9, 2010
I'm having trouble with my Samsung Netbook N220 and its Realtek 8192 wireless card and could use some help with diagnostics. I would like to use the netbook as a server and after a day or so the system stops responding. What I'd like to know:
- What do the "========>ieee80211_parse_info_param(): athros AP is exist" spam messages actually say? Does anyone else have this and stability problems?
- Why is the realtek driver package not working?
I'm running Ubuntu Netbook 10.04/Kernel 2.6.32-24-generic. Initially the card was unable to connect, so I installed the Realtek driver rtl8192se_linux_2.6.0017.0507.2010 which adds a kernel module r8192se_pci.ko. At first my system was hanging during bootup. I then restored /lib/modules/2.6.32-24-generic and now the card is connecting but the system is unstable. The 2.6.32-23-generic kernel, modules listed below, still has modules as installed by the realtek driver and is not working. Below the drivers supplied by ubuntu
./2.6.32-24-generic/kernel/ubuntu/rtl8192se/r8192se_pci.ko
./2.6.32-24-generic/kernel/drivers/staging/rtl8192su
./2.6.32-24-generic/kernel/drivers/staging/rtl8192su/r8192s_usb.ko
[code].....
View 9 Replies
View Related
Sep 1, 2011
I've recently installed Ubuntu 11.04 and everything has been working great, except I cannot see ANY wireless networks, Wired works fine, and while on Windows 7 I can connect fine.lspci -v gives me a wall of text, the end is:
Quote:
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192E Wireless LAN Controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8152
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at 2000 [size=256]
[code].....
View 9 Replies
View Related
Jun 2, 2011
I'm trying to install a wireless USB adapter to a machine so I can get it internet access, unfortunately when I try to run the provided install script I'm getting an error 2, and I've never encountered that before. In fact I'm getting another error which makes me concerned that they just failed at coding this driver...
Code:
/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c:
In function 'LeaveAllPowerSaveMode':
/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c:712: error 'HAL_DATA_TYPE has no member named 'autosuspend_disabled'
make[2]: *** [/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.o] Error 1
make[1]: *** [_module_/tmp/driver/Linux/driver/trl8192CU_linux_v2.0.1170.20101112] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-2.6.32-28-generic'
make: *** [modules] Error 2
Compile make driver error: 2, Please check error Mesg
Something is clearly broken but I am not sure what, I'm awfully new to this, and wireless didn't really exist the last time I used Linux...though this doesn't appear to be specifically related to the wireless function of the driver, it's a make compile problem, it's just mysterious.
View 1 Replies
View Related
May 24, 2011
I found a few fixes which I tried to use, to no sucess. updating drivers, turning router on/off, turning wireless switch on/off, various other fixes from ubuntuforums. tried to upgrade to Natty Narwhale to see if the problem worked it's way out, to no avail. I've spent two days trying for this. Anyone out there willing to point me in the right direction or hold my hand?
View 7 Replies
View Related
Apr 2, 2010
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies
View Related
Aug 9, 2010
I have a usb wireless stick that uses Realtek 8192 driver.
Bus 001 Device 006: ID 0bda:8192 Realtek Semiconductor Corp.
I installed 2 different firmware drivers into /lib/firmware/RTL8192SU/rtl8192sfw.bin but both fail to load:
[ 20.363476] usb 1-1.4.4: firmware: requesting RTL8192SU/rtl8192sfw.bin
[ 20.374663] rtl819xU:signature:8192, version:7031, size:30, imemsize:8408, sram size:a448
[ 20.374667]
[ 20.374737] rtl819xU:--->FirmwareDownloadCode()
[ 20.374739]
[ 20.374804] rtl819xU:--->FirmwareCheckReady(): LoadStaus(1),
[ 20.660196] rtl819xU:FW_STATUS_LOAD_IMEM FAIL CPU, Status=44
[ 20.660201]
[ 20.660205] rtl819xU:FirmwareDownloadCode() fail !
[ 20.660208]
[ 20.660438] rtl819xU:Firmware Download Fail!!4544
[ 20.660440]
[ 20.677958] rtl819xU: --->FirmwareDownload92S()
[ 20.677964]
[ 20.677970] rtl819xU:--->FirmwareDownloadCode()
[ 20.677972]
[ 20.678055] rtl819xU:--->FirmwareCheckReady(): LoadStaus(1),
[ 20.936831] rtl819xU:FW_STATUS_LOAD_IMEM FAIL CPU, Status=44
[ 20.936835]
[ 20.936840] rtl819xU:FirmwareDownloadCode() fail !
Have I tried wrong drivers if so where can I find the correct one?
View 9 Replies
View Related
Mar 26, 2011
This is the wireless card that came with my Toshiba Satellite L655D-S5093. First check to see if you have the correct driver. Run
[Code]....
View 3 Replies
View Related
Apr 27, 2010
I have a problem with my internet connection this is the picture the device is Realtek RTL8187. i didn't know how can i manage this device to work so could you help me i don't have an internet connection in ubuntu right know and i really wanna move to ubntu my verison is 9.10
View 9 Replies
View Related
Apr 26, 2011
trying to get my little Encore USB wireless adapter to work on several flavors of Linux (Ubuntu 10,10, ElementOS, Xubuntu, and Puppy), I emailed tech support at Realtek. I asked where is the Linux driver for this product? I did this because there were no Linux drivers posted on their site and everyone here (and on Newegg) is jumping though hoops trying to get a working wireless connection with the Encore and similar dongles that use the RT8187b chipset. I didn't expect an answer, but felt better after my little vent. I get an email from Realtek with a driver. Realtek needs to promote Jerry -- a beacon of customer service in the age of the "get lost" school of customer relations. I have attached the driver below. Caveat: I have not yet compiled the driver, so I don't know much more about it than I've said already, although the archive appears to contain the source code.
View 3 Replies
View Related
Nov 9, 2010
I have a ThinkPad x100e with a wireless card.Code:03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)my problem is that I can't connect to my wireless network with Gentoo. I've been running Slackware64-13.1 on this computer and now have Windows 7, Ubuntu and Gentoo installed. Slackware, Ubuntu as well as Windows 7 connect to the wlan without problems. I'm using the driver rtl8192se, the module is loaded r8192se_pci and is the same with Slackware and Ubuntu.
I've read many posts and found that other people experience problems with Realtek wlandevices as well. But I have no Idea how to get connected with Gentoo at my wlan. It looks like that the netbook is connected for a very short time, but when dhcpcd broadcasts for a lease the connection is already closed.
View 10 Replies
View Related
Jul 25, 2010
I am using ubuntu 10.04lts on my compaq615 laptop, which has a realtek wireless card, with which I had a few issues to get it to work.
Here is what I had to do:
When I do this, it works beautifully, after setting my router to open I may add.
So, as I said it is probably the fastest wireless I have ever experienced, but my problem is this, everytime I switch my laptop on I have to re-install, starting at:
View 7 Replies
View Related
Oct 4, 2010
when I updated from 10.04 to 10.10 beta, I lost my wireless on my Gateway MX3410 laptop. In 10.04, the wireless Realtek RTL8185 card was auto-detected, worked with the default driver.
So I installed the linux driver version of Realtek RTL8185. Although the driver shows up in the "Additional Drivers" panel under "Administration", the computer is not recognising the driver.
Below is all the specs of the current situation.
Gateway MX3410 Computer
OS: Ubuntu maverick (development branch)
2.6.35-22-generic x86_64
lspci:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
lsusb:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
View 2 Replies
View Related
Mar 7, 2011
I printed off the Readme file from RealTec and went though the following procedure. If anyone spots a glaring error could you please advise and I will try and fix. I changed to superuse using : sudo su and entered my password. All good so far.I was already in the directory containing the downloaded RealTec driver. I downloaded RLT8192SE ver 0019 as this was the closest to my hardware version and the latest driver available.
I used the command : make
and then : make install
Both these commands ran ok. However when I rebooted and activated wireless using Fn F10 on the laptop I was still disconnected from WIFI.
I then used : iwconfig wlan0 up
but this resulted in an error (see below)
root@Ubuntu:/home/jon/LDD/Drivers/test# iwconfig wlan0 up
iwconfig: unknown command "up"
root@Ubuntu:/home/jon/LDD/Drivers/test# ifconfig wlan0 up
SIOCSIFFLAGS: Operation not permitted
View 1 Replies
View Related
May 17, 2011
my Ethernet card stopped responding a few days after installing Ralink Wireless Card Driver for Linux. I have tried installing the drivers from Realtek's site, but it fails. I also have tried reinstalling the network manager, and that still didn't help any. I have also tried looking online for any post or blog that could help, but that also turned up nothing. The Computer is a new 2010 / 2011 (bought it on new years eve) HP Pavilion desktop that came with windows preinstalled.
View 6 Replies
View Related
Jul 2, 2009
I just checked the Realtek website and they have a new Linux Driver for the RTL8185. The new driver is dated 6/26/2009. So it is quite recent. I would have thought it might have gotten into FC11.
I have 2 questions. Has anyone tried it? What would be the steps to install it?
View 1 Replies
View Related
May 30, 2011
Today I realized that my newly installed Natty does not recognize the Ethernet port, I used to have it when I was working on the Ubutnu 10.10. The following is the output (only the network related part) of lshw command:
Code:
-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[code]...
View 5 Replies
View Related
Aug 28, 2009
i use fedora11 and try to use wireless i find driver for chip Realtek RTL8187 but want to know command to install it. i save folder of driver on desktop in folder name rtl8187_linux_26.1010.0622.2006has like this
[Code]....
View 9 Replies
View Related
Dec 12, 2008
There seems to be some trouble with 8139too not working in a previous post. Has anyone found a solution to this? ubuntu version 2.6.24 (Hardy Heron?). Followed all known possibilities but information is all mostly out of date. module 8139too.ok? does not load. Following makefile on 8139too.c supplied, after altering to suit my version, comes up with 3 pages of errors?. ifconfig shows nothing for eth0like the last person markjuggles i have hit a brick wall here. Am I wasting my time?
View 10 Replies
View Related
Jan 20, 2010
I've got a Puppy system running version 4.3.0 that I'm trying to get on the home network. I'm using a D-Link DWA-130 (H/W revision C), which has a Realtek RTL8192U chipset. I got the drivers off of D-Link's website, and they compiled and installed just fine, but when either a) I try to connect to the network, or b) while I'm browsing the web, the system locks up completely. No mouse, no keyboard, no Ctrl-Alt-Bksp to get out of X, nothing.
I'll outline my steps: Install Puppy using a "Full" HDD install (not "Frugal"). Copy the "devx_430.sfs" file (which I got from the Puppy website) from a thumb drive to the "my-documents" folder (although the exact location proabably doesn't matter). Mount it, cd to the mounted directory and execute "cp -a --remove-destination ./* /" and "sync". Copy the kernel source for 2.6.30.5 ("kernel_src-2.6.30.5-patched.sfs4.sfs") to the same directory. Mount it and execute the same commands as before. Copy the folder containing the RTL8192U drivers ("rtl8192u_linux_2.6.0006.1031.2008") to the root directory (i.e. "/"). cd to the folder in the terminal and run "make", "make install".Reboot the machine. Set up networking using the Puppy Internet Connection Wizard. HERE'S WHERE IT SCREWS UP: It connects, but after a while (e.g. just after logging into LQ through it, as a test) it freezes the entire system.
I have to do a hard reboot ("panic button"), then a soft reboot (for some odd reason the usb module won't load after a hard reboot, so the mouse won't work) to get the system working again, only to have it lock up again once it connects to the network.
Are these drivers broken? Outdated? Is there anything I can do to fix this? EDIT: I should add that this only occurs when the adapter is plugged in. If I boot the system with it unplugged, it works fine (probably because it never loads the kernel module).
View 11 Replies
View Related
May 27, 2011
i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it
View 1 Replies
View Related
May 18, 2010
I tried all the threads to load and compile the driver for the Belkin wireless-N F5D8053 (Ralink RT2870 chip) I still cannot get it to come up - the wireless status says device not ready. Here is some of the system info relating to the adapter:
terry@terry-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:bf:53:02:8f
inet6 addr: fe80::214:bfff:fe53:28f/64 Scope:Link
[code]....
View 8 Replies
View Related
Nov 25, 2009
i have some basic knowledge about device drivers.can any one tell how to write drivers for virtual modem, Actually my project is to implement communication between the two PCs by using two virtual modems. so for that i need to write the code for the virtual modem which it should understand all the AT commands exactly as physical modem and it should send/receive call and SMS.
View 1 Replies
View Related
Feb 16, 2010
Where can I get the Realtek ALC883 driver for Ubuntu?
View 1 Replies
View Related
Aug 28, 2010
How can i install Realtek HD Audio Driver??
I Downloaded The Driver From Realtek Website
http://img517.imageshack.us/i/20100827183305.png/
Then
http://img821.imageshack.us/i/98431356.png/
i dont know how to install this driver from this file
i want to use my Sound Card Features ( like Windows 7)
Ex.
http://smg.photobucket.com/albums/v1...ealtekHDMI.jpg
View 2 Replies
View Related
Mar 27, 2011
1. Installed a fresh 10.10 and upgraded all packages (via Ethernet).
2. Downloaded latest drivers from ASUS webiste (DPO_RT3070_LinuxSTA_V2.3.0.2_20100422)
3. Unpacked and tried to compile:
The wireless card is working with the driver rt2870sta, but I've read not all the capabilities of the device is unleash unless the native driver is used.
View 2 Replies
View Related
Oct 4, 2010
I want to install this URL...How to? Because i downloaded the tar.gz2 format of it.And i dont know what to do.
View 2 Replies
View Related
Oct 9, 2010
Sound works with Jaunty Jackal. Does not work with Lucid Lynx. It appears that Lucid Lynx will only acknowledge that I have a modem as a sound card. I just want to add my RealTek ALC880 driver so the sound will work. I've made sure that I have audio privileges, I made sure that nothing is muted using alsamixer. I've been looking at threads and documentation for four days just to fix the sound issue and so I can be prepared in case this 'feature' ends up being continued in Maverick Meerkat and when I upgrade I can use M.M. with minimal fuss.
View 1 Replies
View Related
Jan 25, 2011
I have been having trouble with the install of Ubunto in general. First problem is that my realtek network drivers rtl8168 are giving me some problems. I have followed advice from other threads for disactivating the NIC and disconnecting the power for 10seconds. This works in that Ubunto can recognize the hardware (hardware active), but it says it is not in use. Furthermore, I try to define the IP address manually and it does not allow me to press apply. Therefore I cannot connect to the internet.
I though I would try a fresh install of the latest Ubuntu. I did not have the internet connected (due to drivers). After the partitioning section (I partitioned over Ubunto 9.10), on the screen where it says select Username, computer name etc. some files were loaded, and at the end it says �ready when you are�but I was not able to move forward. I don�t now why. Ultimately I reboot the computer Now I get this message upon booting (I am still booting from USB)
GRUB Loading
error: unknown filesystem
grub rescue
View 4 Replies
View Related
