I'm trying to install a wireless USB adapter to a machine so I can get it internet access, unfortunately when I try to run the provided install script I'm getting an error 2, and I've never encountered that before. In fact I'm getting another error which makes me concerned that they just failed at coding this driver...
Code:
/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c:
In function 'LeaveAllPowerSaveMode':
/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c:712: error 'HAL_DATA_TYPE has no member named 'autosuspend_disabled'
make[2]: *** [/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.o] Error 1
make[1]: *** [_module_/tmp/driver/Linux/driver/trl8192CU_linux_v2.0.1170.20101112] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-2.6.32-28-generic'
make: *** [modules] Error 2
Compile make driver error: 2, Please check error Mesg
Something is clearly broken but I am not sure what, I'm awfully new to this, and wireless didn't really exist the last time I used Linux...though this doesn't appear to be specifically related to the wireless function of the driver, it's a make compile problem, it's just mysterious.
I've just installed Ubuntu 10.04 on my samsung n150. It has the 8192 device in it. Have installed ndiswrapper, however cannot get the drivers for it. How to fix/where to get the driver from so I can get my wireless card working again.
On lspci: 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) .....
I think the driver may be there, however I just can't 'enable' it. On my laptop there is a blue light saying that wifi is enabled however who knows.
I'm having trouble with my Samsung Netbook N220 and its Realtek 8192 wireless card and could use some help with diagnostics. I would like to use the netbook as a server and after a day or so the system stops responding. What I'd like to know:
- What do the "========>ieee80211_parse_info_param(): athros AP is exist" spam messages actually say? Does anyone else have this and stability problems?
- Why is the realtek driver package not working?
I'm running Ubuntu Netbook 10.04/Kernel 2.6.32-24-generic. Initially the card was unable to connect, so I installed the Realtek driver rtl8192se_linux_2.6.0017.0507.2010 which adds a kernel module r8192se_pci.ko. At first my system was hanging during bootup. I then restored /lib/modules/2.6.32-24-generic and now the card is connecting but the system is unstable. The 2.6.32-23-generic kernel, modules listed below, still has modules as installed by the realtek driver and is not working. Below the drivers supplied by ubuntu
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
I have a Thinkpad E420 with a Realtek 8188ce. I'm having a lot of problems getting the wireless to work. After bumbling with drivers (and installing the correct ones from Realtek), my wireless still won't work. I think it might be because of this:
Code:
shayan@shayan-ThinkPad-E420:~$ rfkill list 0: phy0: Wireless LAN Soft blocked: yes
[code]....
I have a button on my keyboard that is supposed to toggle WiFi, but it doesn't seem to do anything.
Here is my lspci and lsmod:
Code:
shayan@shayan-ThinkPad-E420:~$ rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
I am brand new to ubuntu (I installed it about 2 hours ago on my new PC). Everything so far has seemed really easy and straight-forward, but I am having problems trying to connect to my wireless network.
I have a Realtek 8185 wireless card, and have the disk with the inf file on it. I installed ndisgtk but when I pointed it to the inf file, I got an "error while installing" message, then it showed up in the list of currently installed drivers in ndisgtk but as an invalid driver. I'm not really sure what I'm doing wrong.
I actually have another wireless card in my old PC (a belkin of some sort) - would I be better off using that? I'm using an ethernet cable at the moment and it works absolutely fine, I just plugged it in and off I went.
I have a white label netbook with the Realtek RT8187SE Wireless card on PCIe. It is not detecting wireless networks consistently. When I am even 1 meter from the wireless router, I get no networks in range, but sometimes I pick up networks that are more than 20 meters from me. I can not connect, even if it is unsecure.
WiFi Radar does not detect the card. If I run a system check on the PCI bus I get the following: 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22) Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller Flags: bus master, fast devsel, latency 0, IRQ 17
I've had this problem ever since I've installed this ethernet card in the PC (after the 'effin integrated one blew off for some reason), I wasn't ever able to make the networking work again. Every time I try to trigger the PPPoE connection (DSL), the PPP configurator keeps on looking for the concentrator, reaches over 100% and stayed like that for 1 hour. Here's the terminal log of everything that I've tried:
I have an ASUS M4A785-m and it has the Realtek 8112L gigabit nic. The weird thing is, the 10.10 rc saw the nic card just fine, and windows sees the card so it's not disabled in the bios.
Ubuntu says i have no network connections and i need to get internet. Any suggestions?
I should also note that i'm running from the livecd and lspci shows that it detects my NIC. but my NIC isn't "detected" in that it can be used.
I have tried ndiswrapper using 32 bit and 64 bit winxp drivers and the 32 bit driver just doesn't work period (as expected.) The 64 bit driver locked the system up completely and I ended up reinstalling ubunto. I have now reinstalled and updated and upgraded ubunto 10 times in the last 3 days of trying to get this to work and need some external!
using Code: lshw -C network
I do see my network card and driver.
Where I am at currently: I have a fresh install of ubunto 10.04 with it upgraded and updated. I do not have ndiswrapper gtk installed and I have not downloaded any drivers for the wireless card.
Bus 001 Device 007: ID 0bda:8171 Realtek Semiconductor Corp. RTL8188SU 802.11n WLAN Adapter this adapter shows up in network manager when connected to computer but doesn't detect network and cant connect to any network I have setup in nm, the adapter works fine in windows and it's supposed to work in linux or do I have to install drivers?
Ubuntu 10.10 - the Maverick Meerkat � (Installed .iso from cd)The router has a password that I'm not sure if is wep or wpa.When I manually put in the address, netmask,gateway, dns,domain my Realtek usb adapter is connecting to the router but is not receiving packets.I got the driver installed with ndiswrapper.I'm trying to figure out wpa_supplicant
I recently installed ubuntu on my computer and when i put in my network wireless usb adapter (Realtek RTL8191SU) it isn't recognize, and the internet doesn't work. When I do lsusb, it comes up with Realtek Corperation however. And also the light on it doesn't flash either.
trying to get my little Encore USB wireless adapter to work on several flavors of Linux (Ubuntu 10,10, ElementOS, Xubuntu, and Puppy), I emailed tech support at Realtek. I asked where is the Linux driver for this product? I did this because there were no Linux drivers posted on their site and everyone here (and on Newegg) is jumping though hoops trying to get a working wireless connection with the Encore and similar dongles that use the RT8187b chipset. I didn't expect an answer, but felt better after my little vent. I get an email from Realtek with a driver. Realtek needs to promote Jerry -- a beacon of customer service in the age of the "get lost" school of customer relations. I have attached the driver below. Caveat: I have not yet compiled the driver, so I don't know much more about it than I've said already, although the archive appears to contain the source code.
After having installed ubuntu 11.04 my laptop's wireless device (realtek rtl8192se on a packard bell laptop) disappears on ubuntu 11.04. Before, with ubuntu 10.10, I had no problems. Now, when I start ubuntu 11.04, sometimes the wireless card work, but most of times it doesn't: the wireless led is off, and with the lspci command I got no line about wireless card. If I restart the laptop and I start win7, the wireless card doesn't work there too! only after many reboots and/or shutdowns wireless card appears again.
After compiling the Realtek drivers from their page (ver 8.024), installing the module, blacklisting r8169 and updating the initramfs, I still can't get the network card working.The card is listed in lshw as RTL8111/8168B PCI Express Gigabit Ethernet controller.lsmod shows only r8168.dmesg keeps spitting once and again, every second or so the following:
Code: [ 1293.452274] r8168: eth0: link up [ 1294.449785] r8168: eth0: link down
I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
I have a problem with my internet connection this is the picture the device is Realtek RTL8187. i didn't know how can i manage this device to work so could you help me i don't have an internet connection in ubuntu right know and i really wanna move to ubntu my verison is 9.10
Im not able to establish a Wireless Internet connection in Ubuntu 10.04.
Ive tried these steps:
1. Wireless Internet did not show via the Network-icon. Only the 2 LAN-gates where shown
2. I installed the Windows Driver (net8185.inf) via ndisgtk package
3. After restarting the computer, 2 LAN-gates and 1 WLAN where listed via the Network-icon
4. Normally WLAN should automatically start scanning for available networks, but that didnt happen
5. When I tried to connect to my own network, the computer tries to connect for 1 minute and than stops because no connection could be established
6. A wired Internet-connection does not give any problems
Details: - I first had Ubuntu 9.10 but I wasnt able to make a WLAN connection either. I followed the same steps. After that I upgraded to 10.04 - iwconfig in Terminal gives an IP-address which consists of 12 identical characters. - lspci in Terminal shows these data: 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
[Code]....
My questions:
- How to create an Internet connection via my WLAN-card?
- How to install the option to search for available networks automatically?
I have installed 9.04 ( I currently have it on dual boot with Windows XP) and my problem is that I have no internet connection. I have a Motorola modem with a Realtek RTL8139 Family Fast Ethernet NIC network card ( it's a wired connection, btw) When I plug in the cable, there's a little animation, but after a while I get the message: Wired connection is not active (or something like that) Here's what I did so far:
1) I ticked the Wake-On-Lan option in XP, since I read it in the forums that I could solve my problem. It did not
2) I turned off my modem, rebooted my system.
3) I deleted the Auto Ethernet network, and plugged in the cable again...no use.
4) I did an ifconfig, since I know that is what you guys really want
evajulia@Derek:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:18:f3:ab:2b:3a inet6 addr: fe80::218:f3ff:feab:2b3a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
I recently purchased two MSI Windtop AE2220's. One for my home which uses a router with WPA2 protection and one for my office where I use WEP encryption.
The Realtek internal wireless card will not connect to a WEP router if you are running Ubuntu Lucid Lynx 10.04. I have exhausted all suggestions on this site and all drivers found at Realtek's site.
I have been using Ubuntu since Hardy Heron, but sadly, painfully, I have had to install Windows 7 on my office machine until I find a wireless card compatible with the MSI Windtop AE2220, Lucid and WEP.
I am using ubuntu 10.04lts on my compaq615 laptop, which has a realtek wireless card, with which I had a few issues to get it to work.
Here is what I had to do:
When I do this, it works beautifully, after setting my router to open I may add.
So, as I said it is probably the fastest wireless I have ever experienced, but my problem is this, everytime I switch my laptop on I have to re-install, starting at:
I have a Toshiba Satellite L655-S5061 laptop and dual-boot Windows 7 and Kubuntu Lucid Lynx. Windows detects and connects to the wireless network just fine, but in Kubuntu it will detect the network but can't connect to it. Sometimes Network Manager will say it's connected, but Konqueror can't load any websites. Plugging in an ethernet cable doesn't give me access to the internet, either.
I was able to successfully install the drivers on the generic kernel, but I seem to be having a problem getting it done on the real time kernel I downloaded via the Ubuntu Software Center. Here's what shows up when I type in 'make' at the command line:
Quote:
/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 625$ make make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.31-11-rt/build M=/home/marcoharder/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 625/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 625 modules
I'm using Ubuntu 10.04 32 bits and a Realtek 8185 wireless card. The card worked perfectly fine with WPA for a long time in Windows 7, but on Ubuntu I'm having problems. Using it without installing anything else makes it work for a very short time. It disconnects after a while and I have no other choice but to restart the computer.
Using windows drivers and ndiswrapper doesn't work at all (in fact it makes things worse because it stops recognizing my card at all). Using the linux drivers from Realtek's website is what works the best so far. I had to compile them and install them. But it still disconnects after a few hours if I'm using WEP (and only after a few minutes if I'm using WPA). I looked at other people with 8185 problems in this forum but their solutions didn't work for me.
