Ubuntu :: Slow LPR Printing - Sharp AR M205 Connected To Network
Nov 4, 2010
We are attempting to convert our entire office over to Linux, however we are experiencing some printing challenges. We have a Sharp-AR-M205 connected to our network that handles the bulk of our regular printing needs. Linux picks this up from the network and installs the driver (Sharp AR-M205 Foomatic/pxlmono (recommended)) without difficulty. We can print from gedit & OpenOffice without difficulties. The difficulty is when printing images, webpages with image content, or PDFs.
Then the printing spool goes into "LPR ..." printing mode and takes between 5-20 minutes to print a single page. This is particularly problematic as each week we put out a simple publication for our organization, designed in Scribus, outputted to PDF and sent to the printer from 200-300 copies. Our workaround has been to leave a workstation as an XP machine to print the PDF each week.
View 3 Replies
ADVERTISEMENT
Aug 8, 2011
I've run into issue on my Linux machine (running 10.04) when I want to print. When I go to System>Administration> Printing, I cannot find the printer connected to the network through my dad's computer, running OS X 10.7.
View 4 Replies
View Related
Aug 11, 2011
I'm using Arch Linux with kernel 3.0 and brcmsmac to manage my wireless card. My desktop environment is KDE 4.7 and I use networkmanager to handle network. Recently I've been affected by a weird problem wherein whenever I'm connected to a network Java apps such as jEdit take ~30 seconds longer to start but behave normal once started. What could it be due to and how can I fix it?EDIT:The problem occurs both with Oracle's JRE and OpenJDK, both versions 1.7. I'm behind a HTTP proxy, if that makes a difference.EDIT:I've discovered the cause of this problem. My /etc/hosts file had the wrong host name in it. After correcting this to my hostnameeverything is fine.
View 1 Replies
View Related
Jan 28, 2011
I have an old HP Laserjet 5L which is connected to the parallel port of my computer. I could hp-setup to configure the printer. It is connected to
hp:/par/HP_Laserjet_5L?device=/dev/parport0
Everytime a want to print the printer is stopped with the error message
/usr/lib/cups/backend/hp failed
(tried to print as root and as a normal user doesn't work)
If I try to print directly to the device works with
echo "test" > /dev/lp0
but it does not work with
echo "test" > /dev/parport0
the permissions are set to
crw-rw---- 1 root scanner 6, 0 28. Jan 14:54 /dev/lp0
crw-rw---- 1 root scanner 99, 0 28. Jan 14:54 /dev/parport0
My Distribution is archlinux with all updates installed.
View 11 Replies
View Related
May 17, 2011
I have an HP LaserJet 2100M.Printing OpenOffice documents is o.k. no great delay but when I print out from browser pages (html) each page can take up to 10 minutes to print.I don't know how to troubleshoot this.
View 3 Replies
View Related
Apr 8, 2010
OpenOffice 3.1 is extremely slow to print. One page of labels takes 20 minutes.
This is only with Openoffice. All other applications print without difficulty.
View 2 Replies
View Related
Aug 25, 2010
I just installed CentOS on my Compaq desktop pc with HP laserjet 2100 printer on parallel port.However it takes an extremely long time to print.
View 3 Replies
View Related
Jan 9, 2011
The web navigation is very very slowly. The load of web page is slowly. I don't know what i do. I connect with wifi. the download with software same emule is good. I use firefox but i tried also other browser.
View 1 Replies
View Related
Dec 23, 2009
I have recently replaced an older server with a new Intel Xeon quad-core processor. The old machine was running FC6, the new machine is running FC11 64Bit. The problem that I am having is that printing to networked printers prints 2-3 pages, then waits 8-10 seconds and then prints 2-3 more pages. This repeats until the printout is completed. My first thought is that FC11 (or somewhere between FC6 and FC11) introduced some way to limit activity to devices? The confusing thing to me is that I went from a single CPU to a quad core machine, increased the memory from 1Gb to 3Gb, moved from a 32 bit machine to a 64 bit machine and I am running the same applications... they just run slower now...
View 10 Replies
View Related
Mar 18, 2010
Printing bin label reorts to a PICA 104 stores printer is slow, only prints a label EVERY 5 SECONDS ??? (see log below from /var/log/cups/page_log). Have tried to sus it out but am unable to find what's causing ths. Is this a Linux issue or the printer hardware causing this ?
auslab01 126014 ... [18/Mar/2010:12:40:11 +1100] 1 1 -
auslab01 126015 ... [18/Mar/2010:12:40:16 +1100] 1 1 -
.
auslab01 126017 ... [18/Mar/2010:12:41:44 +1100] 1 1 -
[Code].....
View 1 Replies
View Related
Mar 29, 2010
I am running Lenny. USB storage devices are painfully slow, if the data to be copied is above 4GB it works on transferring for more than half an hour and then comes up with an error dialog(saying something like file size is too big). The problem exists in both read and write.
I did google a bit and here is the output of lsmod | grep hci
ehci_hcd28428 0
uhci_hcd18672 0
usbcore118192 4 usb_storage,ehci_hcd,uhci_hcd
[Code].....
View 2 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
Oct 30, 2010
I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
View 14 Replies
View Related
Aug 21, 2010
I want to set a up a network of inter connected pcs, for example on pc A linux is installed.now pcs B, C , D, etc should connect to A and do there work, for example A want to do C/C++, development, whereas B wants to do some PERL development or whatever, this is just an example, 2 different pc users might do same work also, and the connecting pcs may have Windows or linux or bsd.OSes now what h/w or s/w is required and what steps are required to set up this network, main pc would be connected to internet and also connected pcs might want to use internet also..have installed opensuse edulife , and use this as PC A for testing.. and I use bridged dsl Broadband connection to connect to internet , by the username and password provided by the ISP, in windows its easy to setup this connection, however not able to do on linux,
View 9 Replies
View Related
Sep 9, 2010
I am running Ubuntu 10.4 LTS . I wish to share files and a printer over my network, it is on my main computer running XP . my ubuntu can see the printer but it will not print at all, it has the drivers Etc but it will not print. the personal file share said that i do not have the right package installed, but not which one!
View 6 Replies
View Related
Mar 23, 2011
How can I do the printing job over the network .I have only one printer on my firm
Its not network printer here whole system are in LAN how can i gain the printing job
View 1 Replies
View Related
Feb 17, 2010
I have a Toshiba Portege M205-S810 tablet. This computer has a usb cd-rw/dvd-rom drive only. I have a 160 gb HD with 2 partitions. The first contains Windows 7 (I can't remove this, it has all my school stuff), and the second partition is empty.
I downloaded the KDE LiveCD version of 11.2, and the MD5 was correct. I burned the image to a cd via imgburn, and the write was verified.
I want to install OpenSUSE 11.2 onto the 2nd partition. I restart my computer, get into the BIOS, and enable boot from cd-rom. I restart again, the drive spins a bit, and then the windows 7 start screen appears. I'm not sure why this is happening, and would appreciate getting this installed on my 2nd partition.
View 9 Replies
View Related
Sep 18, 2010
I'm a newbie on lucid lynx 10.04
The Hardware:
Mac Mini late 2009 running 10.6.4 (Snow Leopard/OS X)
Dell Dimension 2400 running Ubuntu 10.04 Lucid Lynx
HP Photosmart C4680 multifunction printer/scanner/copier
Canon PIXMA MX310 multifunction printer/scanner/copier/fax
Netgear Wireles-N 150 router model WNR 1000v2
[Code]...
As the HP Photosmart printer is currently connected, it is visible over the network by the macintosh however will not print (all jobs appear in the macintosh's queue without a "hold" designation, printer not on pause. pause/resume only changes the tag on the printer but does nothing to cause the queue to begin printing). Although I can navigate within the printer setup to the existing printer on the network, I cannot connect the printer on the mac without finding a new "printer" instance on the Ubuntu machine when I get there. The printer instance which works is the one the Ubuntu machine created, and the printer instance which does not work is the one generated by the mac, which doesn't work either from the mac or when printed to from the Ubuntu machine, now that this instance exists there.
With the printer connected to the mac, it is visible over the network to the ubuntu box however asks for authentication for the print queue and will not accept any password established for either machine. It also does not specify what account name the password should match with so is an utter quandary.
lastly, I did run dmesg but the result was too large for my terminal's log and scrolling back through it I did not find a section relevant to the HP (or Canon) printer to post here.
View 1 Replies
View Related
Feb 26, 2009
From my Ubuntu Server 8.10, when i attempt to print to my network printer(Brother HL2700cn) it prints garbage and multiple blank pages. I also tried installing the Brother print driver (BR2700_2_GPL.ppd) as instructed, placing the file in directories: /usr/share/cups/model and directory /var/spool/lpd and restarted cups: /etc/init.d/cups restart. after all that, i get the same results, garbage and multiple blank pages. the printer has a static ip address
View 6 Replies
View Related
Aug 1, 2011
I used the .font.conf from [URL] and its working great for Pidgin, firefox and programs GTK based but is not working in the whole KDE system. How can i make the KDE Sharp as in GTK?
[IMG=http://img8.imageshack.us/img8/1553/instantnea1c.png][/IMG]
View 5 Replies
View Related
Jul 20, 2011
I am trying to get network printing using IPP working, as per tutorial by Swerdna Linux Printer Sharing: Suse/openSUSE 10.x 11.x IPP Print Server for Linux & Windows Clients I used to have it working fine using openSUSE 11.1, then I upgraded to 11.4 and haven't been able to get it working since.
I can ping the server ok (ping 192.168.1.30) but cannot connect from web browser to [URL] it says "The server at 192.168.1.30 is taking too long to respond." This is the same from any workstation, Windows or Linux. The printer works fine locally on the server box. I noticed that Swerdna's tutorial (which I used successfully to setup this on 11.1) hasn't been updated for 11.2 upwards, I noticed that a couple of files that needed to be changed previously I don't even have in my current 11.4 version, ie /etc/cups/mime.convs and /etc/cups/mime.types. I'm wondering if these are replaced by something else now, and if that has any bearing on my problem.
View 1 Replies
View Related
Jan 9, 2011
I have a HP c4100 series printer connected to my Ubuntu computer. This computer prints just fine. I also have a Windows Vista computer that's connected to the Ubuntu HP via CUPS (by installing network printer with path of http://xxx.xxx.xxx.xxx:631/printers/printername). This computer also prints just fine. My problem is I just got a new Windows 7 laptop, and connected it to the HP via CUPS the same way as the Vista machine. It installed fine. However the Win7 Laptop will not print. When I try to print, it acts like it is going to print, but never gives an error and the file never makes it into the printer queue (on either the win7 or ubuntu machines, i have tried printing with both queues open to see what happens).
Things I have already changed:
On the Ubuntu machine:Changed all the printer settings on printer to allow any and all connections including printing from the internet.
Edited the /etc/samba/smb.conf to allow CUPS printing and allow guest access
On the Win7 machine:Fixed my LAN security settings (disabled require 128bit encryption, send LM and NTLM responses)
Reinstalled printer several times. I have googled this issue almost every day for a month and tried every setting that I have came across (changed them back if it didn't help). So far nothing has worked for me, and this is my last ditch effort to get this printer working. Does anyone know why I can not print from my Windows 7 machine to a printer connected to my Ubuntu machine? Especially when I CAN print from the UBUNTU and Vista machines.
View 6 Replies
View Related
Mar 30, 2009
I have been trying to set up printing on my Fedora 10 machine so I can print with a remote printer on my LAN that is attached to a Windows XP machine. I went through the whole configuration process, selected a samba printer, put in the correct UNC and driver- it is an HP psc series 1210, the printer was detected when I selected browse during the configuration process so I know I've entered the right UNC. When I try to print a test page or anything for that matter the printer starts as if it is going to start printing but nothing happens. When I go into printer properties it tells me that I have a Remote Downlevel Document and that it is printing but nothing is happening. I've tried restarting the print spool service but nothing works.
View 2 Replies
View Related
Sep 1, 2011
I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
View 1 Replies
View Related
Mar 1, 2010
I have the following nasty issue:I am using fedora 12 and I use vpn for working remote.When I browse the internet the speed is very slow!even when I do a yum update it downloads the packages with max 100kb. if I drop the vpn connection I download the packages with 1Mbdo you know what the problem could be? i created the vpn connection using the network manager...it is a regular pptp connection for the vpn!
View 14 Replies
View Related
Mar 9, 2010
I just got Kubuntu loaded on my system, and this seems to be the closest forum for it. I have two simple questions:
1) What types of packages does Kubuntu use for installing programs and what's the package manager's name? (I don't remember from when I played with it last)
2) My desktop is not connected to a network (yet), so once I download the programs from a different computer and get them onto the desktop, how exactly do I get the programs loaded? I'm unsure if I can use the package manager to deal with files, or if it needs to pull from its own site.
View 2 Replies
View Related
Oct 12, 2009
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
View 1 Replies
View Related
Feb 12, 2010
Im looking for magnifying glass functionalty for ubuntu. I want to use it for web design: watching icons, borders, spaces, etc. I tried the compiz zoom, enhanced zoom and mynifying box bout all of them make things blurry and I couldn't find the way to make things "sharp". Is there such an option for those plugins or an alternative way to have that functionality?
View 8 Replies
View Related
Nov 7, 2010
I'm running Mint 9 as my main network and my wifes Acer Aspire 5610 running Windows vista. My problem is that I can't print from vista. It prints a test page just fine but when I tell it to actually print a document, the status says: "Access denied, unable to connect" I have 2 printers connected and they installed fine in Vista one is a HP LaserJet 2100 series and the other is an HP Photosmart C5280. Like i said, they both print the teat page just fine.
View 9 Replies
View Related
Mar 28, 2009
I have a recently installed dual boot system with Centos 5.2 and Fedora 10. I connect across a LAN to a network printer HP Laserjet 1320n I have been through the printer installation / setup on both systems Fedora works fine, Centos doesn't want to know. Sending anything to print just adds it to a queue that is never printed.
I have looked at the printer management through Firefox browser localhost.localdomain:631 If I send a test page from here (CUPS) it reports the document as printed, but the printer just sits there blinking an orange light indicating an error.
View 3 Replies
View Related
