Edit: after upgrading everything using a usb to ethernet port converter ndiswrapper is working perfectly
I do not have internet access on a laptop I am trying to upgrade. It has no ethernet port. I may resort to buying a USB to ethernet adapter but I spent more than I would like to have already. I have tried every command in the HOWTO for wireless difficulties and posted the output.
I used the following guides to try and get my Netgear WG511 PCMCIA card going:
[URL]
I also made a post about it here: [URL]. As the problem doesn't appear to be ndiswrapper itself I've made this separate post.
Unfortunately, I still end up having wlan0 attempting to connect, prompting for my password, trying to connect then prompting for my password (ad infinitum).
I changed my network security from WPA to WEP and now my card works fine. why this might be happening (i.e. why WEP works but WPA doesn't?)
I'm running Slakware 13 (kernel 2.6.29.6) on a inspiron 1525. I use ndiswarper to use the BCM4312 wireless device without any problem but the fact that the driver does not support the Monitor mode. I therefore bought a NetGear WN111 v2 usb stick but I can't get the linux driver.
Even ndiswarper does not work but it's may be because I don't have the right .sys .ins files. (just to try)
So, I wonder if someone has already successfully manged this device working on Slackware 13?
Actually, I don't know if we can make lets say wlan0 and wlan1 working at the same time. I've try many drivers mentioned on Ubuntu forums but none of theme work with me.
Many people talk about wpa_supplicant but I don't know if I really need it to make my wn111v2 working. And what is a firmware?
i can't get my wg111t netgear wireless adapter to work. I followed the help thing by installing ndisgtk, which installed successfully. I was able to load up the file on the cd that also the help page said. The problem is that the computer won't load up the adapter as it would load up my cd's and flash drive. Here's how i installed ndisgtk. I installed the files ndiswrapper_common, ndiswrapper_1.9, and then the ndisgtk_0.8.5.All of these were for i386.
I just bought a Netgear N PCI wireless network card and was hoping Ubuntu 9.10 would recognize it. I installed the card and was using XP on the machine (Dell Dimension 2400) and decided to install 9.10 on this computer instead (XP = slow!). I'm not sure how to get Ubuntu to recognize it. I was hoping this would be a 'plug and play' install
I just installed Fedora 12 on my HP a430n PC.I used to run Fedora 10, then moved to Linux Mint 7, then to Ubuntu 9.10 and now I am back to Fedora because I want to become more adept with manual package installation and adding repos.When I ran Fedora 12 immediately after then install, before running yum update PackageKit or the software update, it would use my wireless adapter (Netgear WG111v2) and connect to and stay connected to a network just fine. No hiccups.After running the updates and restarting the computer, the wlan won't stay connected for longer than 20 seconds, which is frustrating when trying to install mp3 codecs.
This seems to be a bug in the latest driver update for the WG111v2, but I might be wrong. Anyone have a fix or a way to revert back to the initial driver (I don't know what the original wireless driver was called).
Running HH on a little Toshiba Satellite something-or-other laptop (I want to say A25, but who knows), Verizon FIOS router (wired and wireless).
NetGear WG511v2 adapter is so close to working...
Didn't seem to want to work with ndisgtk, so I ran ndiswrapper from terminal, using driver folder I copied from my Win2K partition.
(Had to do a cp WG511v2.sys WG511v2XP.sys, as the .inf file referred to the latter, but such did not exist; cp seemed to do the trick.) And now, survey says:
Code:
Code:
Code:
In "Network Settings", the card detects a few wireless networks (including my own in-home router). Status LED flashes constantly (which I interpret to be hunting), and every several seconds, it goes solid while activity LED flashes a few times (which I interpret to be finding a network, attempting communication), then activity LED ceases to flash and status LED goes back to flashing (which I interpret to be failing and going around again). Using DHCP, just like the other computers that connect without incident.
I have entered my WEP every way I can think of. The dialog lets me choose WEP ASCII or WEP hexadecimal; I have entered the key in all caps and in lowercase, as ASCII and as hex, have entered 0's and O's where applicable. No combination seems to allow it to actually communicate with my router beyond getting rejected. My other laptop and PC (and this laptop, when running Win2K) all connect just fine; none of them use WPA-type passphrases, so I assume that's unnecessary from Ubuntu. Roaming mode gives the same results as described above.
time Windows user here; limited line command experience from early computer learning; Just wiped my drive and installed Ubuntu. How do I install a driver for the netgear wireless adapter - it was already installed in the machine. I've downloaded the driver believed to work. What next? Also, any instruction on educating myself on Linux/Ubuntu basics?
I recently installed Fedora 14 and am unable to configure my Netgear WG111v3 wireless adapter in KDE However XFCE and Gnome work fine. Has anybody had this problem?
I have just installed Ubuntu 10.10 on a Dell Laptop. It has a Netgear WG511 (made in China) PCI wireless card but I cannot see any connections other than the wired one. Entering in lspci in the terminal mode and removing/replacing the WG511 shows (I think) that something is being detected in the PCI slot "Network Controller: Intersil Corporation ISL 3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] rev 01". Is this the WG511 and, if so, how do I get it to be detected as a network device?
I want to do some pen-testing using aircrack-ng on my local network and currently the only wireless adapter I have is the WNA 1100 netgear adapter. I am using the ath9k_htc driver.
Will the Netgear WPN111 wireless adapter work with Ubuntu 10.10? If so what action is required to get connected with it running Ubuntu 10.10. The adapter works with Windows XP.
Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin. (Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
Okay I've got a Netgear N-150 WNA 1100 USB WiFi adapter, it doesn't work in Ubuntu it's not supported. There should be a way to make it work with ndiswrapper. I tried and failed before and due to other non related circumstances I had to reinstall Ubuntu. What are the steps to install ndiswrapper and it's dependency's on a fresh Ubuntu installation that cannot connect to the internet.
Just installed yesterday - and I love it so far except my wireless turns on for about 5 minutes, then disconnects.
In order to get internet back I have to either restart or uncheck "Enable Networking" and then recheck it.
I will try to provide as much information, but like I said I am new to Ubuntu and there is some things that are completely different from what I'm used to on Windows:
Wireless Adapter: Netgear RangeMax Next Wireless PCI Adapter WN311B
Additional Driver its Using: Broadcom STA wireless driver
I have a Netgear GA311 PCI Gigabit Adapter. Any chance it might work with CentOS? It is not one of the cards listed when I do "NEW" Ethernet Adapter from the System Network menu. Maybe there is compatible choice?
I have got a netgear wireless PC Card WG511 made in Taiwan (not china). I have intalled it in windows w/acouple of ver. Settling on v1. I am first generation pc. maybe toold for Linux? I can't even figure out how to post in the Dam Small Linux website. But have read most of the posts in linux questions. I can't install a wireless card ;<( this is an old laptop and would be like usable if I get the *&^%$ wireless working. In fact, does anyone have a wireless card working with Dam Small Linux? I have the book but, it's not been much help. Other that telling me to add nodhcp in the boot startup. That didn't help either. I have learned alot through this misery of the wireless nic.
I'm in a bit of a pickle. I've installed Xubuntu on an old Compag laptop that doesn't have any ethernet or wireless built in. It does have a 3com pcmia wireless card, however.
lspci lists it as 3crwe154g72, and I'm hoping that enabling the restricted drivers will get the right firmware and driver for this card. However, with no internet access, I can't do this!
how or where I can download the required files on a working machine and stick them on a usb stick, or something, to get this working?
My wireless disconnects after around 10 minutes. It does not reconnect automatically. I've to pull out the usb dongle and then put it back in to connect again.
lsusb Bus 001 Device 003: ID 0846:9020 NetGear, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub,iwconfig lo no wireless extensions.
I have managed to setup ndiswrapper and am able to see my wireless network but cannot connect to it.
I am using NDISWRAPPER and a Netgear WNDA3100 driver (I think this is Atheros-based) to connect through a Netgear WN111 USB Wireless dongle to my existing wireless network. I am running 9.04 on a Fujitstu-Siemens laptop.
I am aware that the WNDA 3100 driver is not the intended driver for my WN111 dongle, but it is the only driver that showed "hardware present" when loaded. All others (I tried perhaps 5 or 6) showed driver installed but no info about hardware.
When I try to connect to the network it tries for a while, occasionally prompting me for the passphrase, and then eventually stops.
I would like some help figuring out what else I need to do. I feel I am nearly at the solution. My guesses are as follows (for what they're worth):
1. Could it be something to do with the WPA security?
2. Could it be something to do with this, output from dmesg?
Quote:
[ 20.737363] ADDRCONF(NETDEV_UP): wlan1: link is not ready
3. Could I need to set some further parameters in the network manager?
I recently purchased a WNR3500L wireless router and it works great with Windows. However, when I boot up Ubuntu 11.04, it cannot find other wireless networks in the area. Despite this, my internet connection speed to my computer remains unaffected...the only issue is that it cannot pick up other networks.
From searching on Google and on these forums, I've learned that most routers don't work "out of the box" with Ubuntu...NDISWrapper and additional drivers must be installed in order to make them work to their full potential. But alas, I am a super-newb...I don't know what to do from here on to get my Netgear WNR3500L router to pick up other wireless signals.
For some reason, i just cannot get my wireless to work in xubuntu. When i click on the network-manager applet, it only has the wired network tab and VPN connections, there are NO wireless networks displayed. I have also tried iwconfig, which returned
lo no wireless extensions. eth0 no wireless extensions. and lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
what it takes to get my wireless back up and working. It used to work fine under 10.4 My laptop is a IBM Thinkpad T42, that uses Intel wired and wireless nics. (correction, looks like the wireless nic is actually Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01) )
-Laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
WG111v2 USB that works just fine on my Ubuntu 12.04 Dell can't connect on my Debian Gigabyte. It finds the network name just fine, remembers its password, and tries to connect 3 times before giving up. This tower is 4 days old, as is the OS.
i installed ndiswrapper and ndisgtk, then using my thumb drive installed my .inf file (tried in the terminal as well as ndisgtk and both worked succesfully). when i run "sudo ndiswrapper -l" my wn311b device is shown, and the chipset to be working properly. now when i run "iwconfig", Wlan0 is not listed. also i blacklisted the drivers "b43, b43legacy, ssb, and bcm43xx", could this be the issue? im running the newest build of ubuntu which i installed today on this computer for a dual boot drive with vista.
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
