Ubuntu Networking :: Install Netgear Wireless Adopter?
Feb 2, 2011How do I install my Netgear Wireless Adopter on ubuntu 10.10? it tries to search for it but doesn't find it.
View 9 Replies
ADVERTISEMENT
Networking :: Install Broad Band Wireless Modem (netgear)ADSL2 On Fedora Core 7
Jul 29, 2010how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies View RelatedUbuntu Networking :: 10.04: Wireless Disconnects After A While With Netgear Wn111 V2
Apr 10, 2010My wireless disconnects after around 10 minutes. It does not reconnect automatically. I've to pull out the usb dongle and then put it back in to connect again.
[Code]....
Ubuntu Networking :: Can't Get NetGear Wireless Card To Work?
Mar 14, 2011System: HP Vectra VL Ubuntu Version: 8.10,
lsusb Bus 001 Device 003: ID 0846:9020 NetGear, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub,iwconfig lo no wireless extensions.
[Code]...
Networking :: NetGear - WN111 V2 Usb Wireless Adapter ?
May 16, 2010I'm running Slakware 13 (kernel 2.6.29.6) on a inspiron 1525. I use ndiswarper to use the BCM4312 wireless device without any problem but the fact that the driver does not support the Monitor mode. I therefore bought a NetGear WN111 v2 usb stick but I can't get the linux driver.
Even ndiswarper does not work but it's may be because I don't have the right .sys .ins files. (just to try)
So, I wonder if someone has already successfully manged this device working on Slackware 13?
Actually, I don't know if we can make lets say wlan0 and wlan1 working at the same time. I've try many drivers mentioned on Ubuntu forums but none of theme work with me.
Many people talk about wpa_supplicant but I don't know if I really need it to make my wn111v2 working. And what is a firmware?
Ubuntu Networking :: Can't Get Wg111t Netgear Wireless Adapter To Work
Mar 5, 2010i can't get my wg111t netgear wireless adapter to work. I followed the help thing by installing ndisgtk, which installed successfully. I was able to load up the file on the cd that also the help page said. The problem is that the computer won't load up the adapter as it would load up my cd's and flash drive. Here's how i installed ndisgtk. I installed the files ndiswrapper_common, ndiswrapper_1.9, and then the ndisgtk_0.8.5.All of these were for i386.
View 1 Replies View RelatedUbuntu Networking :: Netgear Wireless N PCI Adapter WN311B-100NAS
Mar 24, 2010I just bought a Netgear N PCI wireless network card and was hoping Ubuntu 9.10 would recognize it. I installed the card and was using XP on the machine (Dell Dimension 2400) and decided to install 9.10 on this computer instead (XP = slow!). I'm not sure how to get Ubuntu to recognize it. I was hoping this would be a 'plug and play' install
View 4 Replies View RelatedUbuntu Networking :: Can See Wireless Network But Can't Connect - Netgear WN111 / Fix It?
Jul 4, 2010I have managed to setup ndiswrapper and am able to see my wireless network but cannot connect to it.
I am using NDISWRAPPER and a Netgear WNDA3100 driver (I think this is Atheros-based) to connect through a Netgear WN111 USB Wireless dongle to my existing wireless network. I am running 9.04 on a Fujitstu-Siemens laptop.
I am aware that the WNDA 3100 driver is not the intended driver for my WN111 dongle, but it is the only driver that showed "hardware present" when loaded. All others (I tried perhaps 5 or 6) showed driver installed but no info about hardware.
When I try to connect to the network it tries for a while, occasionally prompting me for the passphrase, and then eventually stops.
I would like some help figuring out what else I need to do. I feel I am nearly at the solution. My guesses are as follows (for what they're worth):
1. Could it be something to do with the WPA security?
2. Could it be something to do with this, output from dmesg?
Quote:
[ 20.737363] ADDRCONF(NETDEV_UP): wlan1: link is not ready
3. Could I need to set some further parameters in the network manager?
Ubuntu Networking :: Netgear N600 Wireless Router Setup With 11.04?
May 18, 2011how to set this baby up with a working Internet connection so I can get on my PS3 across the other room.
View 1 Replies View RelatedUbuntu Networking :: Cannot Pick Up Wireless Networks With Netgear WNR3500L
Jun 26, 2011I recently purchased a WNR3500L wireless router and it works great with Windows. However, when I boot up Ubuntu 11.04, it cannot find other wireless networks in the area. Despite this, my internet connection speed to my computer remains unaffected...the only issue is that it cannot pick up other networks.
From searching on Google and on these forums, I've learned that most routers don't work "out of the box" with Ubuntu...NDISWrapper and additional drivers must be installed in order to make them work to their full potential. But alas, I am a super-newb...I don't know what to do from here on to get my Netgear WNR3500L router to pick up other wireless signals.
OpenSUSE Wireless :: Can't Install Drivers For Netgear WG311v3
Feb 12, 2011I'm having trouble installing my wireless card drivers. I've read a lot on this using Ndiswrapper to install my drivers but when I go to install I get this.
linux-8h6g:/wg311 # ndiswrapper -i wg311v3.inf couldn't open wg311v3.inf: No such file or directory at /usr/sbin/ndiswrapper line 219.
I'm giving the right path to the inf file tried moving to other folders and still nothing.
General :: Install The Netgear Wireless Adapter Driver?
Dec 23, 2009time Windows user here; limited line command experience from early computer learning; Just wiped my drive and installed Ubuntu. How do I install a driver for the netgear wireless adapter - it was already installed in the machine. I've downloaded the driver believed to work. What next? Also, any instruction on educating myself on Linux/Ubuntu basics?
View 14 Replies View RelatedUbuntu Networking :: NETGEAR Wn311b Wireless Driver Detected But No Wlan0 - 10.04
May 10, 2010i installed ndiswrapper and ndisgtk, then using my thumb drive installed my .inf file (tried in the terminal as well as ndisgtk and both worked succesfully). when i run "sudo ndiswrapper -l" my wn311b device is shown, and the chipset to be working properly. now when i run "iwconfig", Wlan0 is not listed. also i blacklisted the drivers "b43, b43legacy, ssb, and bcm43xx", could this be the issue? im running the newest build of ubuntu which i installed today on this computer for a dual boot drive with vista.
View 5 Replies View RelatedUbuntu Networking :: Wireless Internet Stopped Working From Netgear Router
Apr 24, 2011running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
View 3 Replies View RelatedNetworking :: Netgear N300 Wireless Router Into Existing Network
Dec 29, 2010I have a client that has a basic network that uses comcast cable. He bought a NETGEAR N300 wireless router which has a 192,.168.3.X network and he attempted to add it to his 10.10.10.X network and all is fine. He laptops and such can get to the internet fine. The issue is he cannot get to any of his devices on his 10.X network. I have looked at his comcast router which is controlling his 10.X network to see if I can add addition routing to his 192.X network. but didnt see anything. I also am not to familiar with the N300 wireless router. I was going to have the wireless DHCP turned off and some get it to pull the DHCP stuff from the comcast side but dont see any area to do this.
View 2 Replies View RelatedFedora Networking :: Netgear WG111v2 Wireless Adapter Won't Stay Online
Jan 28, 2010I just installed Fedora 12 on my HP a430n PC.I used to run Fedora 10, then moved to Linux Mint 7, then to Ubuntu 9.10 and now I am back to Fedora because I want to become more adept with manual package installation and adding repos.When I ran Fedora 12 immediately after then install, before running yum update PackageKit or the software update, it would use my wireless adapter (Netgear WG111v2) and connect to and stay connected to a network just fine. No hiccups.After running the updates and restarting the computer, the wlan won't stay connected for longer than 20 seconds, which is frustrating when trying to install mp3 codecs.
This seems to be a bug in the latest driver update for the WG111v2, but I might be wrong. Anyone have a fix or a way to revert back to the initial driver (I don't know what the original wireless driver was called).
Ubuntu Networking :: Internet Connection Sharing : 3G/4G USB Dongle And Netgear WGR614 Wireless Router?
Jan 1, 2011I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies View RelatedUbuntu Networking :: Xubuntu 10.04 IBM Thinkpad 390X Netgear WG511 PCMIA Wireless Adapter?
Jan 21, 2011Edit: after upgrading everything using a usb to ethernet port converter ndiswrapper is working perfectly
I do not have internet access on a laptop I am trying to upgrade. It has no ethernet port. I may resort to buying a USB to ethernet adapter but I spent more than I would like to have already. I have tried every command in the HOWTO for wireless difficulties and posted the output.
[Code]...
OpenSUSE Install :: WPN111 Wireless Adapter And NETGEAR - Make The Module Load Automatically On Boot ?
Feb 14, 2011Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
Ubuntu Networking :: Install Netgear WG111v2 Driver On 9.4 Computer?
Jan 1, 2010I have been trying to install my Netgear WG111v2 Driver on my Ubuntu 9.4 computer but everything I have tried has failed. I have looked online and found instruction but it did not work.
View 1 Replies View RelatedNetworking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?
Jun 18, 2011I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
Fedora Networking :: Install Netgear WN111v2 (AR9100ap Chip) On 12 Web Server
Apr 17, 2010I am having some difficulties installing a wireless usb adapter on Fedora 12. the usb adapter is: Netgear WN111v2 Wireless-N USB adapter and it has the chipset: Atheros AR9100AP. I did a intensive search on the web but i don't know how to go further. These are the steps i've tried. I installed NdisWrapper and tried the following:
[code]...
But i really have no clue what to do further. I also found this site, which seems to have all the answers: [URL]... But i have no idea how it works. I copied all the firmware files to right directory. But what is the next step?
OpenSUSE Wireless :: Wireless Netgear Usb Wg111v2?
Jan 16, 2010Been doing some reading here and needing some help since all the forums here isn't for 11.2
i have the above mentioned usb wireless device and have downloaded the firmware and have renamed it now i need to know is where to put the firmware and get this wireless to work i hate the cable stretched across the
OpenSUSE Wireless :: Connection With Netgear Wg111v2?
Jun 29, 2010I have problems connection my wg111v2 to my AP. I am running opensuse 11.2 with kernel 2.6.31.12-0.2 The AP itselfe is working fine - as I am using it to access the inet with it from my laptop. However I also tried different channels and encryption schemes with no result. But with my Desktop it is really strange. When I boot up it seems as if I have a connection for a short time (I can start loading a webside but it will stop in the process before it is finished). I have searched for similar problems and found this post: Netgear WG111v2 RTL8187 - openSUSE Forums but some things are different: but I thing the comand line output will tell you more than my talking...
My device:
Code:
linux-tn7m:/home/ava/sourcecode/rtl8187L_linux_26.1039.0104.2010.release # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0846:6a00 NetGear, Inc. WG111v2 54 Mbps Wireless [RealTek RTL8187L]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
Ubuntu :: Highly Weird Wireless - Connect To Home Netgear Network
Jan 2, 2011I have an Ubuntu 10.04. It connects perfectly with a Netgear wireless to the internet at my work place. But i cant connect it to my home Netgear network. It connects to the router. Receives IP address. But no internet. But I'm able to connect to internet using ethernet. I'm also able to connect to internet wireless in my Windows.
View 5 Replies View RelatedOpenSUSE Wireless :: NetGear WG111 WiFi (v2) - Cannot Connect
Nov 28, 2010i am running on suse 11.3 on a laptop i missing the wireless under network it said not connected i done everything that is writte n i have acer aspire 5742 intel core i3 370m
[Code]...
Hardware :: Netgear WG511v2 Wireless Adapter - Almost Working
Dec 17, 2008Running HH on a little Toshiba Satellite something-or-other laptop (I want to say A25, but who knows), Verizon FIOS router (wired and wireless).
NetGear WG511v2 adapter is so close to working...
Didn't seem to want to work with ndisgtk, so I ran ndiswrapper from terminal, using driver folder I copied from my Win2K partition.
(Had to do a cp WG511v2.sys WG511v2XP.sys, as the .inf file referred to the latter, but such did not exist; cp seemed to do the trick.) And now, survey says:
Code:
Code:
Code:
In "Network Settings", the card detects a few wireless networks (including my own in-home router). Status LED flashes constantly (which I interpret to be hunting), and every several seconds, it goes solid while activity LED flashes a few times (which I interpret to be finding a network, attempting communication), then activity LED ceases to flash and status LED goes back to flashing (which I interpret to be failing and going around again). Using DHCP, just like the other computers that connect without incident.
I have entered my WEP every way I can think of. The dialog lets me choose WEP ASCII or WEP hexadecimal; I have entered the key in all caps and in lowercase, as ASCII and as hex, have entered 0's and O's where applicable. No combination seems to allow it to actually communicate with my router beyond getting rejected. My other laptop and PC (and this laptop, when running Win2K) all connect just fine; none of them use WPA-type passphrases, so I assume that's unnecessary from Ubuntu. Roaming mode gives the same results as described above.
Hardware :: 11.04 And Netgear 54Mbps Wireless PC Card WG511v2?
May 6, 2011Ever single thread i have read about this network card and trying to get it to work with Xubuntu has not worked for nothing. I got the NDISwrapper install and what not and a driver but nothing is working. i have no idea what to do i cant get the card to turn on or scan or anything.
View 3 Replies View RelatedUbuntu Security :: WNA 1100 Netgear Wireless Adapter Monitor And Injection Mode?
Mar 2, 2011I want to do some pen-testing using aircrack-ng on my local network and currently the only wireless adapter I have is the WNA 1100 netgear adapter. I am using the ath9k_htc driver.
View 7 Replies View RelatedFedora :: Unable To Configure Netgear WG111v3 Wireless Adapter In KDE?
Dec 31, 2010I recently installed Fedora 14 and am unable to configure my Netgear WG111v3 wireless adapter in KDE However XFCE and Gnome work fine. Has anybody had this problem?
View 1 Replies View Related