Fedora Networking :: Broadcom BCM4313 Wireless - No Wired Connection?
Oct 30, 2010
So basically, complete linux noob here, dual-booted fedora 13 with windows 7, and fedora can't seem to detect either my wired or wireless, however i don't really care about the wired. After spending a few hours browsing forums and tutorials and the like, seems as if it is a driver issue, as in there is none. I have managed to find the files :
HTML Code:
broadcom-wl-5.60.48.36-1.fc13.noarch.rpm
kmod-wl-5.60.48.36-1.fc13.5.x86_64.rpm
[code]...
View 6 Replies
ADVERTISEMENT
Jul 17, 2011
I just installed Fedora (15) for the first time. However I do not have a wired internet connection, and have the infernal BCM4312 and I understand the STA works with this (It has worked for me with other distros). In another thread, I read that I can download the relevant files (using another computer) from FedoraFusion, transfer them to the wireless computer and install.
View 9 Replies
View Related
Aug 25, 2011
This is my first time here and I'm very much a beginner to Linux. I installed Fedora 14 and found out I didn't have wireless. I found this beautiful guide online posted by Stoat:
[URL]
but unfortunately, I live in an apartment and can only get access to wireless internet. I hope I'm posting in the correct place. Anyways, this is my setup:
$ uname -r
2.6.35.14-95.fc14.x86_64
$lspci
Network Controller: Broadcom Corporation BCM43225 802.11b/g/n
View 2 Replies
View Related
Jan 9, 2011
I have an Acer Aspire One D255 netbook with opensuse 11.3 installed and after several painstaking days of tinkering I successfully installed the broadcom wl drivers, and now my wifi card is operational. However, i can connect to my wireless network, but still have no internet access. I have searched the forums and google for a solution but most issues I have found that are similar to mine have been resolved once the wl drivers and firmware where installed
View 2 Replies
View Related
Dec 21, 2010
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Feb 17, 2009
I've installed F10 on my laptop since few days and I'm facing an annoying networking issue: the network connection seems to work well when, suddently, it goes down for a while, and then come back.This happens with both wired and wireless (Intel PRO/ Wireless 3945ABG) connection.
View 6 Replies
View Related
Dec 2, 2010
my wireless network connection is not working but wired connection is working .at networkmanager wireless connections are not showing .
[walkingtree@localhost ~]$ iwconfig lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thrff Fragment thr=2352 B
[Code]....
View 1 Replies
View Related
Jan 26, 2011
I'm having issues with my broadcom BCM4313 wireless adapter. Everything works just fine when connected (with additional drivers & Connman), but it takes about 5 minutes to connect to my network when i just started my computer! When resuming from hibernation it goes very quick though, so just when I boot my pc it's taking forever...This is what I found in the dmesg output:
Code:
[ 16.778057] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36
[ 16.808768] type=1400 audit(1295859939.727:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=833 comm="apparmor_parser"
[code]....
View 2 Replies
View Related
Mar 31, 2011
I just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update
apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
View 4 Replies
View Related
Sep 12, 2010
I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
View 5 Replies
View Related
May 6, 2011
So I had 11.04 beta and after the official release I updated,rebooted and lost all wifi and wired connectivity.
On an Inspiron 9300
lshw -C network gives
*-network:0 UNCLAIMED
For my Broadcom BCM4401-B0 100Base-TX and *-network:1 DISABLED For my wirless interface Intel PRO/Wireless 2200BG
View 1 Replies
View Related
Jan 18, 2010
I recently purchased an Acer Aspire 1410 notebook running Windows 7 home edition. I installed Ubuntu 2.3 and my wireless and network LAN connection is not working. I saw on a link in this forum, someone was having similar problem. However, when i tried the solution that was recommended/suggested to the person, it did not work for me.
what I can do to get my wireless and wired connection to work?
View 9 Replies
View Related
Sep 18, 2010
I have an old Compaq Presario v2000 that recently had Ubuntu 10.04 installed on it. The wired internet worked when it was installed, but the wireless didn't. I tried to download the drivers for it and it failed everytime. I did an update thinking that the update might fix the wireless, but it didn't, it actually made my wired connection stop working. So now I have a newly installed OS on the laptop, and I can't do anything on it because there is no way to get any internet.
View 1 Replies
View Related
Jan 26, 2011
I have a wired connection. I want to to distribute it through my wireless card so that other people around can use it. How?
View 2 Replies
View Related
Nov 9, 2010
I'm using Archlinux with NetworkManager to connect to the internet. When I'm in my room, I've an ethernet cable and still receive the wireless signal.Sometimes (like when we have a power cut, somebody is rebooting the router or simply something wrong with the provider), I'm disconnected during a few seconds, NetworkManager ask me again the password of the wireless (even if it remembers it), and then I'm ok.But when I'm not in front of my computer, while I haven't push the button "ok", it doesn't connect, even with the wired connection.That's not very normal in my opinion as there is supposed to have two different and independent connection. No ?
I intent to install an ssh server on my computer but if I cannot access it every time there is a problem that won't be very useful.
View 1 Replies
View Related
Jul 8, 2010
I have installed the driver of my Broadcom Wireless card BCM4312 ( Acer extenza 5620 laptop) and when i try to connect to my wireless connection it just try to connect for a while and then go offline i tested another usb wireless card and still no success
[Code]....
View 3 Replies
View Related
Oct 18, 2010
My HP Pavilion dm4 notebook has the Broadcom bcm4313 and worked with the proprietary Broadcom driver provided with Ubuntu 10.04 but did not work with the corresponding driver provided with Ubuntu 10.10. The solution that worked for me (for a while) was to install "broadcom-sta-common" and its dependencies using Synaptic. After enabling the proprietary driver (System > Administration > Additional Drivers) and rebooting, wireless worked. I even shared this on this post. chargersfan420 get his Broadcom card functional again.
What changed to break it? Well, wireless had worked for several days, so I felt that I had solved the wireless problem. Now it was time to find a solution to unlock my BIOS settings. I successfully used PCCMOSCleaner to clear the password. After that, no more wireless. (Note to dm4 users: Apparently HP puts a password on the BIOS settings and makes it available only if you boot into the factory-installed Windows 7 and retrieve it. Of course I never booted into Windows 7 before upgrading the machine to Linux, deleting both the Windows partition and HP's hidden recovery partition.)
I uninstalled all the Broadcom stuff and reinstalled it all. Now I appear to have wl working, and b43 and ssb blacklisted, but network manager is not seeing any wireless connections available.
My Hardware: HP Pavilion dm4-1063cl My OS: Ubuntu 10.10 32-bit (clean install)
lspci reports this:
Code:
$ lspci -vvnn | grep 14e4
03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01)
dmesg reports this: (MAC address edited out with hash marks.)
[Code]......
View 6 Replies
View Related
Jan 14, 2010
I have a laptop Acer aspire 5100. I installed Ubuntu a while ago and it was working well. Last week I updated it using Update manager and ever since I haven't been able to connect either wireless or wired connection.
I get this:
Code:
The wireless card seems to have disappeared.
I reinstalled Ubuntu and the problem persists.
View 2 Replies
View Related
Apr 19, 2010
Why is wireless taking priority from the wired connection? I should not have to disable wireless just to have the wired connection connect.
View 1 Replies
View Related
May 5, 2010
I decided to do a fresh install of 10.04LTS on a Dell Latitude D600 Laptopne wordDisaster I have no wireless or WIRED internet connection. After viewing another post I've provided the output of "sudo lshw -C network" command below (I've blocked out my MAC address on purpose). It appears that the lan card is not even being recognized. The card is enabled in bios (I've checked twice). I don't get it, the wireless worked fine before I did a fresh install of 10.04LTS. I can't use wireless because I have the b43 driver firmware issue that I can't resolve unless I get my wired connection working.
*-network
description: Network controller
product: BCM4309 802.11a/b/g
[code]...
View 9 Replies
View Related
Aug 29, 2010
For the last 3 or so hours I have been trying in vain to simply give my mobile phone wifi internet access from my netbook. I have tried to google and follow some howto's and guides, but they're either too old or don't explain it very well. I'm fairly new to use of Linux and of wireless networks, but can handle setting them up in Windows. So basically, having said that, I believe I mostly understand how this whole thing is supposed to work theoretically but I just feel as though I lack the experience to jump the wireless hurdle AND the Linux hurdle at the same time. I have provided some information below.
- Setup is based on Lucid netbook remix install with a Maverick kernel update due to lack of driver support for wireless NIC - I can confirm wireless does work properly for connection purposes
- I followed [URL] and kind of followed [URL however I couldn't even tell how to run Network Manager, even though Synaptic tells me it is installed
- When I ran into problems trying to install ipmasq I found [URL] and followed what the response told me to which allowed me to restart the dnsmasq and the dhcp3-server at least
- I have restarted the entire netbook several times throughout the process.
View 8 Replies
View Related
Jun 13, 2010
how to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies
View Related
Jan 14, 2010
As of now, my internet works fine when connected with an ethernet cable.The problem is it doesnt seem like my wireless is working at all.The led light is orange, (its usually blue when it connects) and I cannot see my home dsl network.Is thereany specific troubleshooting steps I should take?HP dv6000 laptopwireless card: Broadcom Corporation BCM4311 802.11b/g WLAN
View 6 Replies
View Related
Feb 25, 2010
I'm trying to set up a wireless or wired network (wireless would be better...) to share my connection with my housemate, as well as with some devices. The only guide I found regarding this (I must admit, I didn't have much time to put into research), was dating back to 2005, and although doable, seemed somewhat confusing. Getting to the point: is there a way (maybe a standalone program, or some kind of plugin) to share a connection?
View 9 Replies
View Related
Sep 7, 2010
I had windows and 8.10 earlier and now have single boot 10.04 !
1.) I can see wireless networks only after I am connected to the router through wired ! I guess its some thing to do with me activating ifup and ifdown, when my wired connection stopped working as i was trying to install wireless drivers.
2.) Even when I see wireless networks, i cannot connect to any of them.
I tried various things for a whole day trying to fix it and i doubt if i screwed up some thing that was running good.
View 6 Replies
View Related
Jan 22, 2011
share wireless PC connection to xbox 360 via wired eithernet(10.10)?
View 1 Replies
View Related
Mar 29, 2011
Machine brand: Acer 5253-BZ893 laptop
Ethernet controller: Atheros communication device 1083
Network controller: Broadcom Corp. Device 4357
iwconfig: no wireless extensions
network config: *-network UNCLAIMED
iwlist scan: Interface doesn't support scanning
Ubuntu release: 10.04.2
uname -mr: 2.6.32-28-generic x86_64
I have not been able to get an internet connection wired or wireless on my laptop. I downloaded the drivers from Acer's website and tried installing them using ndiswrapper. Still no luck.
View 3 Replies
View Related
Apr 6, 2011
I've been running Ubuntu 10.10 on my Dell Vostro 1500 for awhile, one morning I tried to get online & no networks would show up. I tried plugging in my ethernet cable & still nothing. Just the two lights by the plug stay lit up. If I boot into Puppy Linux the wireless works just fine. I was using the B43 driver before I had problems, then when I was trying to get it to work I accidentally deleted the driver. I cannot figure out how to get my internet working again in Ubuntu. I don't want to be stuck using Puppy Linux forever! I don't really know many commands, normally just search online how to fix problems, but it's pretty hard to do when I have to boot back & forth between operating systems to find things to try.
View 9 Replies
View Related
May 30, 2011
I'm fairly sure that this is an Ubuntu issue, as I've tried this on my windows computer with success.I'm running a minecraft server on my laptop, previously over a wireless connection but the data rates were too slow. On a wired connection, however, the server starts up and runs like normal but the port is not open when accessing from the network's public IP. I tested this with canyouseeme(.)org. I can get to it from other computers within the network by using a local IP, which to me seems a little strange as it seems to indicate that the port is open on the PC but somewhere in the router it gets confused due to being wired(?). Obviously I've forwarded the ports on the router (BTHomehub 2.0) with both TCP and UCP (it worked over wireless!). Any suggestions as to what might be causing this? I'm stumped.
View 5 Replies
View Related
