Fedora Networking :: No Wireless On Broadcom Chip & No Access To Wired?
Aug 25, 2011
This is my first time here and I'm very much a beginner to Linux. I installed Fedora 14 and found out I didn't have wireless. I found this beautiful guide online posted by Stoat:
[URL]
but unfortunately, I live in an apartment and can only get access to wireless internet. I hope I'm posting in the correct place. Anyways, this is my setup:
$ uname -r
2.6.35.14-95.fc14.x86_64
$lspci
Network Controller: Broadcom Corporation BCM43225 802.11b/g/n
View 2 Replies
ADVERTISEMENT
Oct 30, 2010
So basically, complete linux noob here, dual-booted fedora 13 with windows 7, and fedora can't seem to detect either my wired or wireless, however i don't really care about the wired. After spending a few hours browsing forums and tutorials and the like, seems as if it is a driver issue, as in there is none. I have managed to find the files :
HTML Code:
broadcom-wl-5.60.48.36-1.fc13.noarch.rpm
kmod-wl-5.60.48.36-1.fc13.5.x86_64.rpm
[code]...
View 6 Replies
View Related
Jul 17, 2011
I just installed Fedora (15) for the first time. However I do not have a wired internet connection, and have the infernal BCM4312 and I understand the STA works with this (It has worked for me with other distros). In another thread, I read that I can download the relevant files (using another computer) from FedoraFusion, transfer them to the wireless computer and install.
View 9 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Mar 31, 2011
I just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update
apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
View 4 Replies
View Related
Sep 12, 2010
I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
View 5 Replies
View Related
Jul 17, 2011
Just a short note on getting this card to work in Fedora 14 (and presumably Fedora 15) 64bit. First of all, none of the rpm packages which you might choose will work because none of them are for this chipset. First, one goes to the Rosewill website, finds the driver for this card as a compressed tar file. After downloading it and extracting, you will find in the parent directory a Makefile and README_STA_PRI.
The instructions in README_STA_PRI, if followed carefully, will do the job except for one thing: there is a mistake in the os/linux/config.mk file that needs to be fixed. In the $(PLATFORM),PC 2.4 branch, change -imarch=i686 to -march=core2 and more importantly, in the 2.6 branch, add -march=core2 to the EXTRA_CFLAGS and add export CFLAGS (which would otherwise not be done). In the main Makefile, as per the instructions, I set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y so that the Network Manager can control the card.
In the instructions, wps_supplicant is not where they indicate (it is in /usr/sbin/) and the configuration file which I used was in /etc/wpa_supplicant/wpa_supplicant.conf, not the one in the dbus-1/system directory. The wpa_supplicant command was run before the make and before "insmod rt3562.ko", and it generated a bunch of error messages because the card had not be recognized yet. The error messages didn't seem to matter.
The card was already in the machine and when "insmod rt3562.ko" was executed, the card was instantly recognized and the network manager set it up and put it into play without any further fuss or muss.
View 1 Replies
View Related
Dec 31, 2009
I have a dell mp1210 xps laptop. I just recently installed installed Ubuntu 9.10 and am very green. With difficulty I managed to install the drivers for the wireless card and now have wireless on the laptop. In order to get the wireless working I had to restart my computer, and once it booted up again the wireless works, but there is no trace of eth0-my wired network device (Broadcom BCM4401-B0) which was working fine before I got the wireless adapter working. Lspci still shows the device as it did when it was functioning, but ifconfig only shows my local loopback and wlan0 (my wireless device). I am not sure how eth0 got deleted, I am wondering if maybe I have to set up some sort of switching between the wired and wireless adapters so they are not both active at the same time. Any suggestions would be really nice, I have been digging through the forums, but I am unsure of what went wrong or what to do about it.
View 14 Replies
View Related
Dec 21, 2010
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies
View Related
Aug 14, 2010
I've installed Fedora 13 on a Toshiba Satellite A40 laptop, and am trying to get the wired ethernet connection to work. Network Manager says it is connected, and the connection details (DHCP assigned IP, gateway, dns servers) all seem correct. However, I cannot browse the internet. Checking for updates fails also. I have tried pinging various sites and the results are inconsistent - sometimes it works, sometimes it times out with "unknown host". [URL]... I've searched around for similar issues and tried disbaling ipv6 both in Fedora and Firefox, but this doesn't help either.
View 10 Replies
View Related
Sep 1, 2009
I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
View 14 Replies
View Related
Sep 20, 2009
I installed broadcom 4322AG to my HP mini 2140, I restart the netbook but the wireless is not working.
[Code]...
View 14 Replies
View Related
May 29, 2009
My current network setup at home is all wired, and that's worked for me so far. Now I want to set up a wireless connection on my Linux box that I can connect to with both my laptop and my Nintendo DS. I'd like to be able to host a wireless network from the Linux box, connect to it with some other wireless device, and have the wireless device communicate with the router, the internet, and other computers on the wired network. I have the wired network set up (statically configured) as eth0. Other network adapters present on the system are eth1 (not in use) and wlan0, wlan1, and wlan2 (identical cards, remnants from the last time I experimented with wireless).
So I guess my question comes in two parts:
1) How do I set up wlan0 such that it can host? Is Ad-hoc mode okay for this, or do I need to set it up in Master mode?
2) How do I forward connections between the wireless net and the router?
Note that I will be using WEP, as it is all that the NDS supports. I'd like to set up MAC filtering as well, but not until after I get something that works.
View 11 Replies
View Related
Apr 24, 2010
I have installed Linux for the first time on an old Gateway purchased from work. The system seems up and running, but I can't get connected to my wireless or the wired network. I have tried using the network manager, but it isn't working. I have tried reinstalling Fedora 12 I have the following LSUSB and LSCPI output.
[Code]...
View 6 Replies
View Related
Apr 29, 2011
F14 did not recognize my wired or wireless NIC upon installation. I have enabled network manager, what should I do from here? Here is my hardware specifications:
Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01)
Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
View 11 Replies
View Related
Aug 7, 2009
sometime back when installing FC10, i tried installing ndis wrapper, and later i installed the broadcom driver bcm431 (i think). also i didn't remove the ndis wrapper.
all was fine untill a yesterday when ndis wrapper and some related packages got updated which somehow caused wireless to stop working. lspci showed the hardware present.
to get it to work, i did a yum erase ndis-wrapper, followed by a reboot.
it may not be the most elegent way, but it worked for me.
hardware specs:acer aspire 4720Z (mine has broadcom wireless, others may have atheros)
View 4 Replies
View Related
Sep 19, 2009
This is my first post! I am a brand new Linux fan and am determined to understand how this system works! I am running Fedora 11. My wired NIC works just fine. I am having problems with wireless. I ran lspci -v to find my driver details, found it online and got it working so it would show up in the network configuration. I am having problems getting it to work from there. I am used to getting windows to install the driver and then being able to search for wireless networks. When I try to activate it i get:
02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. WL-138G V2 802.11g WLAN PCI Card
Flags: bus master, fast devsel, latency 64, IRQ 21
[code]....
View 2 Replies
View Related
Feb 17, 2009
I've installed F10 on my laptop since few days and I'm facing an annoying networking issue: the network connection seems to work well when, suddently, it goes down for a while, and then come back.This happens with both wired and wireless (Intel PRO/ Wireless 3945ABG) connection.
View 6 Replies
View Related
Dec 2, 2010
my wireless network connection is not working but wired connection is working .at networkmanager wireless connections are not showing .
[walkingtree@localhost ~]$ iwconfig lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thrff Fragment thr=2352 B
[Code]....
View 1 Replies
View Related
Aug 24, 2011
i have installed fedora 15(lovelock) on my lenovo z560 ideapad laptop. in fedora 15 lovelock internet is not working by wire or wireless. Network controller: Broadcom Corporation BCM4322 803.11a/b/g/n Wireless LAN Controller (rev 01)
[amit@localhost ~]$ ifconfig
em2 Link encap:Ethernet HWaddr 88:AE:1D:274:45
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code].....
View 1 Replies
View Related
Dec 8, 2009
I have a Broadcom Corporation BCM4312 802.11b/g (rev 01) wireless card. I installed these packages:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
akmod-wl-5.10.91.9.3-3.fc12.6.x86_64
kmod-wl-2.6.31.6-145.fc12.x86_64-5.10.91.9.3-3.fc12.8.x86_64
[code]....
uname -a says:
Linux boz.alafkhar 2.6.31.6-145.fc12.x86_64 #1 SMP Sat Nov 21 15:57:45 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
and:
# lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl
[code]....
My networkmanager understands that the card is installed. But it can not find any network. Also iwlist scan gives me no result. I did not have this problem on earlier fedora releases. Recently I upgraded to F12 from F11. I should mention that I have another USB DLink wireless card and when I plug it, everything works fine with that card. I also tested wl_apsta driver using fw-cutter. I did not work neither.
View 6 Replies
View Related
Feb 11, 2010
I installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:
Code:
$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
Here is information about the PCI devices available on the system:
Code:
$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
[code].....
View 7 Replies
View Related
Aug 19, 2011
Good afternoon, I have a PC with Kubuntu 10.04 and a PCI Wireless Mymax MWA/PCI-150N RT3060F chip, I am not able to install, configure the system, I downloaded the driver on the site [URL]... php? s = 2, RT3062PCI/mPCI/CB/PCIe (RT3060/RT3062/RT3562/RT3592) and follow the procedures but it still fails, the card comes up in the connections but no signal scans.
View 9 Replies
View Related
Sep 11, 2009
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
View 12 Replies
View Related
Oct 1, 2010
I've installed new drivers and when I go to connect the MAC address shows up on the router but only for a few seconds and then disappears and I can't access wifi. I've even attempted opening up the router and still can't connect.
View 2 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Jan 11, 2010
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
View 8 Replies
View Related
Apr 10, 2011
I've been struggling with this a bit now, and I'm not sure what the problem is. I have a laptop with a BCM4401 Ethernet card as well as a BCM4311 Wireless card. The wireless card works great out of the box, I'm able to connect with it perfectly. The problem is the ethernet card. Here is the situation: The NetworkManager menu doesn't list "Wired Networks" at all (ie. it doesn't say "not managed", it just only lists Wireless networks) Going into Network Connections, there is an "Auto eth0" entry ifconfig shows eth0 (which I assume means NetworkManager isn't managing eth0) I have edited /etc/NetworkManager/nm-system-settings.conf to say managed=true I have edited /etc/network/interfaces to remove any mention of eth0 (all that's left is the "lo" lines) So I'm not sure why eth0 is still showing up when I run ifconfig, and why Network Manager is not managing it. Any ideas?
Edit: Not sure what I did but now ifconfig spits out this:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:26:2c:60:75
inet addr:10.0.1.12 Bcast:10.0.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:26ff:fe2c:6075/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
The MAC address of the "Auto eth0" entry is 00:1C:23:8F:D4:39, the same as the eth1 entry that ifconfig spits out.
View 5 Replies
View Related
Apr 18, 2011
I am working on ubuntu 10.10 in a VM. I went ahead and did updated the system when prompted. That has disabled my wired network connection. I am not sure what is the reason. If it is a device driver or any network service. I guess device driver is not an issue as I can detect my network card from ubuntu.
Does any one know the solution?
View 5 Replies
View Related
Apr 17, 2010
I am having some difficulties installing a wireless usb adapter on Fedora 12. the usb adapter is: Netgear WN111v2 Wireless-N USB adapter and it has the chipset: Atheros AR9100AP. I did a intensive search on the web but i don't know how to go further. These are the steps i've tried. I installed NdisWrapper and tried the following:
[code]...
But i really have no clue what to do further. I also found this site, which seems to have all the answers: [URL]... But i have no idea how it works. I copied all the firmware files to right directory. But what is the next step?
View 1 Replies
View Related
