I have installed F11 on my Dell Inspiron 1501. I tried to get the Broadcom 4311 wireless card to work by following the instructions for installing the Broadcom driver from this link: [url].
That resulted in the following errors when I gave the command:
Code:
I removed the broadcom-wl package and installed the autoen package from DangerMouse. After rebooting wireless works but I still get the same errors when I give the command:
Code:
I had to disable encryption on the router to connect, but I guess that's a compromise I'll have to make right now. I will work on that some more after I get these error messages straightened out:
Code:
Note that wireless does seem to be working (though without encryption) despite the error messages. And I got these same error messages with the Broadcom driver but I could not get wireless working.
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
I just installed the 64-bit Kubuntu 11.04 and i've been having some issues getting the wifi to work. At first I went to additional drivers and activated the STA driver and restarted. After restarting when I went into the network manager and any option for wireless was disabled.
What Linux version should i get if i want to revive an old laptop? Im talking about a Dell Inspiron 1501, with a Mobile AMD Sempron Processor 3500+789 MHz, 448 MB RAM, running on Windows XP 2002 professional edition.
today my windows crashed and i decided to move into Linux.But here comes my biggest problem now, i cannot connect to wireless network but i am able to connect through wired connectionmine is a 10 year old computer so i think the card used is Intel PRO/Wireless 3945ABGi am using Fedora 14. please note that i know only very little in Linux so please respond accordingly
i have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
I've just had to reinstall WinXP on a Dell Inspiron 1501. An ideal opportunity to try out Ubuntu. First I tried a WinXP/Hardy Heron dual boot - all seems okay. Next WinXP/Karmic dual boot - all seems okay. Then, why not, WinXP/Hardy/Karmic triple boot - all seems okay. Playing with each OS I noticed that Hardy had a couple of update notifications. So I opened Update Manager, went on-line, hit [Check] and was informed that there were 200+ Important Security Updates - I installed these. Better check Karmic too - similar story, installed 200+ updates. Everything still seems okay in WinXP, Hardy and Karmic. However, I've just noticed that the Grub2 boot menu now displays eight "Ubuntu" lines, as opposed to the four lines I had originally
Ubuntu, Linux 2.6.31-19-generic Ubuntu, Linux 2.6.31-19-generic (recovery mode) Ubuntu, Linux 2.6.31-14-generic Ubuntu, Linux 2.6.31-14-generic (recovery mode)...
I have an issue relating my broadband connection, which I am not able to solve. I hope and wish, that I would find some way out here.
Some introduction: I am using Dell Inspiron (i3 processor) laptop, which I recently bought. I have win 7 preinstalled in it. In win 7, the wired broadban connection (Airtel connection) is working fine and have no issues.
I have been using mobile GPRS(BSNL, Ltd) through bluetooth, and that have been working fine. But today when I tried to connect through landline connection, it didn't workout. But the bluetooth connection is still fine. When I tried to do the connection manually through Network Manager, it is not taking the MAC Address. Till now, after installation, I have not updated my OS.
I surfed the net and tried some commands, whose results I am posting below.
From a post I found out, that I should change my duplex settings (from 100 full to 10 full), but I could not get much. The corresponding commands and output,
I will like to know how to install ethernet drivers dell inspiron N4010 on opensuse 11.3, when I go to YaST > Network Devices > Network Settings and then I have a Warning message "Network is currently controlled by NetworkManager and its settings cannot be edited by Yast. Then I click on OK, I go to Global Options and i click on Traditional Method with ifup, and then I go to Overview and I have this information:
Name IP Address Attansic Ethernet controller Not configured Broadcom WLAN controller DHCP
This is my first time using openSuse, I previously install Ubuntu and I had some similar problem with the internet I hope fix that problem as soon as possible and keep using openSuse. Other thing is that I don't have any internet connection with this laptop even wire or wireless connection.
I installed Ubuntu 10.10 on a Dell Inspiron 6000 but when I connect the ethernet cable the computer detects that the cable was connected but doesnt connect to the internet.
I have an Inspiron 1300 and have followed the "B43" instructions here:URl...Plus various other guides including the "one click b43 fix" but nothing useful happens. Wired access doesn't work either.
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
I've got a Dell Inspiron 1545 with wireless card Dell wireless 1397 802.11g. It was working fine with Windows and Ubuntu 9.04 (I've got the two OS installed alongside). But as soon as I upgraded my Ubuntu to version 10.4 I realised it lost its wireless connection! I updated the system, the hardware driver for Broadcom STA wireless driver is activated and in use (according to Ubuntu Hardware drivers checker) but the fact is that I can only connect on the Internet if I hook the net cable on it, when I run the mouse over internet connection icon at the topright side of the monitor I see "no network" message and when I left click on it the option "wireless network" it's disabled and gray. How can I get my wireless card back working?
i have to say that i'm not too familiar with Ubuntu... or Linux in general . I've installed it once, just to test it out but I didn't know how to use it so i just reinstalled windows. The other night, i was bored and decided i wanted to re-try Ubuntu and to my suprise, i found Wubi. I love ubuntu now and i made the decision to permanently switch over to ubuntu.
At first, my wireless wasn't working, but there was a quick fix. All i had to do was go to the Synaptic Package Manager, Reload, and search for "Broadcom." I installed the Broadcom STA Wireless driver and i was online within a couple of minutes. I then played around for a couple of hours before turning my laptop off. But, this morning, when i turned it back on...I coudlnt' connect. When i click the little connection icon in the top right, i see the message "Wireless is disabled".
There is a key on my computer that turns the wireless card on or off, and i have tried it. It doesn't work. I have reinstalled the broadcom driver and it doesn't work. I've rebooted...And it doesn't work. I don't know enough about linux to get a solution and every other solution i find on the internet doesn't work.
I have seen in other threads that you guys usually ask for a a couple of things from the user. ifconfig and the sudo lshw -C network so i have included them below. I also looked into the ubuntu help documentation and it told me to do the lspci command.
ifconfig
Code: eth0 Link encap:Ethernet HWaddr a4:ba:db:d1:61:c2 inet addr:192.168.1.68 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a6ba:dbff:fed1:61c2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
i have a dell inspiron 1764 windows 7. it will connect wirelessly fine on windows 7 side but when i boot to ubuntu cant detect network or anything. what do i need to do.
I finally got around to trying Ubuntu 10.04 on a "decommissioned" Dell Inspiron 8100 1.2Ghz P3 512MB RAM 40GB HD... and Ubuntu is absolutely AMAZING compared to Windows! I'm a Mac guy and honestly Ubuntu gives 90% of the Mac OS GUI and 0% of the "brain damage" of WinBLOWS...
The only thing missing in this laptop is WiFi which I want to do via one of the PCMCIA slots since the mini-PCI is a combo 10/100 network + v.90 modem card... and I need to keep the Ethernet port and fax modem capabilities.
What are the best "Plug n Play" PCMCIA WiFi cards for our "G" and "N" WPA2 ONLY Airport Express WiFi network? I'm new to Linux so I'd really like to avoid editing and replacing system files and drivers if possible to get a PCMCIA card working. I'd also like a card that works in WinXP Pro SP3 since this laptop is dual boot capable.
I'm on a Dell Inspiron 6400 which had been running Ubuntu 10.10 (32 bit) perfectly.Today I upgraded it to Natty and the wifi now refuses to work. Details: While no Additional Drivers were needed on 10.10, upon installing Natty it prompted me to install "Broadcom STA proprietary wireless driver". Now when it's active I don't even have the option 'Enable Wireless' (only Enable Networking). If I disable STA the Enable Wireless option comes back, yet I can't actually search for wifi networks or connect to my saved one. The keyboard key to enable/disable wireless also does nothing.
I can take this laptop to somewhere with an ethernet connection for an afternoon if need be, but am currently stumped as to what to do. Obviously I know this machine can handle Wifi under Ubuntu - it's definitely a Natty problem.
I'm running on 11.04 on my Dell Inspiron 1764, and so far haven't been able to achieve internet access through either a direct wired connection or wireless.
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running rfkill list all shows dell-wifi hard blocked no soft blocked no. The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
I'm having problems connecting to a wireless network on my Dell inspiron 1520. i can't seem to enable wireless roaming on ubuntu and i get various error messages when i try.
When i run iwconfig, i get:
running iwlistscan gives me:
When i right click the network manager, there is no "enable wireless" option. I know that wireless works since i used it last night on windows, and the radio is turned on.
I tried to find my solution for hours now but no luck. I'm a medical student and the other day I finally found the time to set up ubuntu for my first time. Everything was working great and I had wireless up and running. However, I tried to set up tethering to my iphone and after that my wireless hasn't been working (I've noticed no other problems). [URL]..Then I used this tutorial [URL].. However, after doing these steps the computer needed to reboot (I actually forget exactly where but I had to reboot in the middle of the second tutorial). After my computer restarted my wireless no longer showed up. By this I mean that wireless network no longer even showed up as an option when I left clicked then connections. However, I did not lose the wireless profile under network connections. So I went to system and noticed that the Broadcom STA driver was no longer active. So I tried to activate again and received this message.