Fedora Networking :: Restart From Hibernate - Missing Eth0?
Apr 17, 2009
I'm running fc10 x64 - latest updates. First I could never get wake on lan to work - spent days working on that one. Now, when I restart after a hibernate my eth0 is not re-enabled or recognized anymore. About to give up on Fedora.
I've tried service network restart.
I've tried unplugging cable and plugging back in.
I've tried init.d/networkmanager restart.
Only reboot works.
I've spent so much time trying to configure Fedore Core 10 for a Dynamips server and it's just not ready on some of the essential things like this hibernate problem and also wake on lan.
View 3 Replies
ADVERTISEMENT
Mar 8, 2010
If I uncheck and recheck "Enable Networking" in the Network Manager Applet 0.7.996 I would expect the wired network to disconnect (which it does) and reconnect (which it does NOT). So I tried sudo ifdown eth0 and got
Quote:
Ignoring unknown interface eth0=eth0.
ifconfig tells me
Quote:
eth0 Link encap:Ethernet HWaddr 00:25:64:e8:18:2c
inet addr:192.168.0.112 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:64ff:fee8:182c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
so I am at a loss. How do I stop and restart the network interface short of rebooting the machine?
View 9 Replies
View Related
Sep 13, 2010
When I shutdown computer and start it up, eth0 doesn't seem to show up (though lspci sees ethernet card and modules are loaded). When i reboot (which is exactly the same, in my opinion), it works good. I'm using Sabayon GNU/Linux, Gnome Network Manager applet.
>uname -srm
Linux 2.6.34-sabayon x86_64
>sudo lspci | grep Ethernet
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 05)
View 2 Replies
View Related
May 13, 2011
This is my first use of Ubuntu, but I have previous decent experience on Centos & Mandriva. I've just installed Natty 11.04 on a box that was running a mandriva 2010 - and the network is acting quite strange. When I define a static IP for eth0 through the gui, along with route & dns, it sort of works: ssh is fine, vnc too. However, I have an asterisk running on the box, and it is wild: some packets get lost in the box.
An ngrep shows the packets reaching the interface, but they dont show in asterisk !!! I've done a ufw disable, iptables is empty (why cant I service iptable restart btw ?). ip route list show decent routes (eth0 default); When I switch to DHCP, it is better, but unstable... If i plug a wifi usb stick, it seems to be better... Is there some known issues that could explain this behaviour ? The nic is a: Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller
View 5 Replies
View Related
Mar 16, 2011
I have already tried reloading the drivers, restarting the interface (which is missing) and every other solution I found on this forum (well... not exactly all of them but many of them) uname -a gives Linux hostname 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
[Code]....
View 3 Replies
View Related
May 24, 2010
I'm trying to setup my interfaces along side GNS3 for study purposes, and came across a ..... vid saying to try this (my current config)
[Code]....
I'm praying for some crappy syntax error, also in Network Connections... its now blank, the original auto eth0 setup is missing
View 1 Replies
View Related
Oct 31, 2010
I just installed Fedora 13 on a new Dell XPS desktop and some of the networking files are not created/missing. The computer has Broadcom Gigabit wired card and Asus PCE-N13 wireless card. When I type lspci, I see that Network conroller: RaLink RT2860 and Ethernet controller: Broadcom BCM57780 Gigabit Ethernet. So, somehow they are being detected by the OS, but I am not sure if the drivers are installed or why some of the network files are missng.
View 1 Replies
View Related
May 3, 2011
Whatever I do, I can't get my linux to reboot, shutdown or hibernate.
Here is some new info:
I am using stripped down xfce4 with compiz and emerald.
Here's my .xinitrc
Code:
and my startup script
Code:
1. My login manager is SLIM which I use to autologin.
Code:
2.
Code:
3. Here is what happens when I try to reboot with the .xinitrc file I published above - it freezes on console login screen: [url]
4. Here is what happens if I change the .xinitrc file to this:
Code:
And script file:
Code:
It won't even login: [url]
View 2 Replies
View Related
Aug 19, 2009
used to use this feature alot in F10 ... not sure... but i can't find it in the keyboard shortcuts prefs
View 2 Replies
View Related
Jul 24, 2011
I dual boot Ubuntu and Windows and sometimes I just want to switch between the partitions without loosing the state of the OS I was currently working with. Currently to do that I just hibernate that OS and, when the computer turns off, I restart it and select the correct partition.
I do not really want to have to press the on button again every time I want to switch between partitions. I figure that there must be a way to make the hibernate action restart instead of shutting down.
How do I make the hibernate action restart instead of shutting down on:
Windows, or Ubuntu
P.S. It is more important to me that I can do this in Ubuntu than Windows (because of the way I use the partitions) therefore if one answer says the Ubuntu way and the other says the Windows way then I will mark the Ubuntu one as the answer and give the Windows one an upvote and a big thankyou.
View 1 Replies
View Related
Oct 1, 2009
I tried to dual boot Fedora on a vista system. Now fedora boots as primary and when i try to boot vista i get the message, bootmgr missing control, alt, delete to restart.
View 10 Replies
View Related
Oct 13, 2010
After upgrading to 10.10 on my asus netbook suspend and hibernate is missing, how can i fix this?
View 1 Replies
View Related
Aug 19, 2009
5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
View 17 Replies
View Related
Jul 1, 2010
I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.
My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...
The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2
Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...
I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).
View 10 Replies
View Related
Dec 18, 2010
I'm running a dual boot Ubuntu 10.04/Backtrack 4 (Ubuntu 8.10) system. I can get internet in the BT4 side but not in the Lucid side. In Lucid I can ping my router, and the network manager says I'm good to go, but I can't get to any web sites. It all started when I tried to put my laptop on another network by mimicking the settings of a computer I had just unplugged from the network. MAC address and all.
ifconfig eth0:
Code:
eth0 Link encap:Ethernet HWaddr 00:1f:16:ba:4c:8c
inet addr:10.136.9.147 Bcast:10.136.9.159 Mask:255.255.255.240
inet6 addr: fe80::21f:16ff:feba:4c8c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 3 Replies
View Related
Feb 12, 2010
Though I kinda do wish that I could just fully migrate to Fedora (or Linux in general), I still do need Vista for some things (like, until I can get this mess with my tablet and speakers sorted out). However, when I tried to boot into Vista this morning (by selecting "other" in GRUB) it said "BTMNGR is missing. Press Ctrl-Alt-Delete to restart."
Will I have to use the Vista Home Premium installation disc to fix this? Surely, telling it to automatically fix startup problems would work, right? I'll try later today PS This problem could also be related to my other 'yum update' problems. All of my problems started when I performed a whole kernel update, so that could also be why I can't boot into vista.
View 9 Replies
View Related
Nov 6, 2010
I just installed FEDORA 14 on my PC which already had Vista. I am able to dual boot through the GRUB boot loader. I am facing an issue where wired network in FEDORA stops working if I hibernate Vista. I really would like to be able to hibernate both to quicken the startup times.
Here are the steps:
1. Boot to Fedora (everything works fine including wired network)
2. Hibernate Fedora
3. Boot to Vista (everything works fine including networking)
4. Hibernate Vista
5. Boot to Fedora. It loads up fine, but wired network status icon keeps spinning and then results in a kernel package crash. I already reported the crash to Fedora.
6. Hibernate Fedora and boot to Vista (Vista resumes fine from hibernation and everything works in Vista including networking).
Is Fedora supposed to work when both Fedora and Vista are hibernated in a dual boot PC?If I shut down Vista, and then resume Fedora, networking works fine. So there is something in Vista hibernation that causes Fedora networking to fail. This issue remains even if Fedora is restarted (not hibernate/resume).
View 4 Replies
View Related
Jul 24, 2010
Last weekend I upgraded my Opensuse 11.1 machine (pretty clean) to 11.3. After the upgrade, the NVidia graphics no longer worked, but more importantly, eth0 was not bound to my Intel 82566DC gigabit ethernet controller. I fooled around in yast network devices long enough to know that everything there is configured correctly. The Yast message at the bottom of the Network Settings screen says:
"Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details."dmesg output shows nothing related to networking. The boot screen shows:
Setting up (localfs) network interfaces:
lo ...
Waiting for mandatory devices: eth0 __NCS__
29 28 27 ... 1 0 ... failed
eth0 no interface found ... failed
[code].....
Any ideas here? I've googled till my fingers were tired and all I've found are references from folks with real hardware issues. This machine worked fine for me under 11.1. Now I can't get 11.3 to bind the nic.
View 9 Replies
View Related
Apr 22, 2011
im trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot
eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....
View 1 Replies
View Related
Aug 2, 2009
I downloaded Fedora 10 32bit and put it on a Dell Dimension 8200 to save it from the recycle bin. Everything seems to work except I cannot get an IP addr. Roadrunner is my ISP using a cable modem and a Linksys Instant Broadband Series Etherfast Cable/DSL router model BEFSR41. In system-config-network, the nic shows inactive. If I activate it a window opens saying "determining IP information for eth0". After a short time the message adds the word "failed". Using a Windows PC on the same network, I can look at the DHCP connections on the Linksys and I see the MAC addr for the PC running Fedora.
From the OS installation, /etc/sysconfig/networking/devices/ifcfg-eth0 has following:
DEVICE=eth0
HWADDR=00:80:ad:d1:88:c9
ONBOOT=yes
[Code]....
View 6 Replies
View Related
Jun 21, 2010
I'm guessing this is a r8169 problem. This worked for a while after upgrading to fc13 (from fc12)
I'm not able to get off the local network with eth0. I can though with eth1. Both interfaces are connected to the same switch and have the same network, gateway, and dns server addresses.
The odd part is I am able to ping eth0 from off the LAN and get a reply.
Wireshark capture is attached.
View 11 Replies
View Related
Jul 9, 2010
I can't start eth0 and have read thru many of the threads on this and can't figure it out. What does this message mean?
Code:
[jeff@chladni ~]$ ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/13
[Code]....
View 1 Replies
View Related
Dec 26, 2010
i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies
View Related
Apr 1, 2009
I just installed Fedora 10. I entered my static network info in Network Configuration. When rebooting, the eth0 says Inactive. I've read many articles about this problem on earlier versions and tried many of the suggestion, but have not found a definite way of solving this. Is there a better way or a workaround to get this machine on the network?
View 6 Replies
View Related
Feb 4, 2010
I'm using Fedora 12 on a box with 2 separate NICs in different subnets. The problem is that after a reboot, both NICs always show up as eth0 when you left click on the networking icon on the top right. I have to manually change one of them to eth1 & then things start working.
DEVICE=eth0
HWADDR=(mac address)
BOOTPROTO=none
TYPE=Ethernet
ONBOOT=yes
[Code]....
View 1 Replies
View Related
Aug 27, 2010
I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed.I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies
View Related
May 21, 2011
I am unable to connect to the internet in fedora (XP connects fine) I normally use wifi, but have also checked the wired connection.
View 10 Replies
View Related
Jun 3, 2011
I'm using Fedora 14 with gnome as my GUI.As you know , there's gui tool which manages network adapter , either wireless or wired.After every login into fedora , I should click on network manager icon on taskbar and choose System eth0 to establish and enable eth0. I want it to be done automatically.
Previously , I used opensuse 11.4.It has a tool in yast which allows you to choose how to configure your network adapters , traditional or knetworkmanager mode.I can't find this like tool in gnome on fedora.
how I can configure network adapters to start or not during startup?
View 1 Replies
View Related
Jan 6, 2011
my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 Replies
View Related
Jan 12, 2010
I am trying to setup linux box as router.
What i am trying to do is:
1. I am trying to setup NIC via network not NetworkManager
2. I have assigned the ip to both NIC with #ifconfig eth0 192.168.1.1
3. #Ifconfig shows my nic and ip
4. restart the service network .
5. #ifconfig shows nothing. NO NIC card
I dont want the network manager coz i dont want to install the gui on router and network manager works only in gui mode. ( i think my this understanding is correct)
I tried to configure the NIC with Network Manager
When ever i restart the network service i have no out put from ifconfig
I tried to configure the NIC with #setup command as well and select the dhcp option
I can not find any ifcfg-eth0 in /etc/sysconfig/networking-scripts/
View 6 Replies
View Related
