Fedora Networking :: 10 - Nfs-utils Update - Waits For A While At Leopard's - Connecting To Server - Dialog Box
Jan 15, 2009
I ran a yum update this morning on my Fedora 10 box (i386), which updated the 'nfs-utils' package from 1.1.4-4.fc10 to 1.1.4-6.fc10. Before the update I was able to connect to the fedora NFS exports just fine from my Macbook Pro running latest version of Leopard on a simple home network. After the update, when I try to connect to the NFS export it waits for a while at leopard's "Connecting to Server" dialog box, and after about a minute I get a message saying "Could not connect to the server because the name or password is not correct" (though my UID's are the same on both systems). My /etc/exports and /etc/sysconfig/nfs files were unchanged by the update. I tried restarting the nfs services as well as shutting down iptables and setting SELinux to permissive, etc. with no success.
I get the following in /var/log/messages (192.168.1.102 is the address of my macbook):
I was able to download the RPM for the older version of nfs-utils and then do a 'yum localinstall' to revert to the older version. This fixed my issues completely and my setup works as it did before. However I am curious to know why the latest version of nfs-utils breaks my setup, and whether it is a problem with my setup or if I should just wait for the next version to come out and see if the same thing happens.
Here is my /etc/exports file. If I understand this correctly it should allow connections from anyone with an IP address on my local network.
View 14 Replies
ADVERTISEMENT
Apr 1, 2010
I have a problem with a simple client/server socket program. the connection is done through 2 connections a udp connection and a tcp connection. the flow is that the client sends a udp packet to the server and the server returns it through a tcp connection. this is done in a loop. my code works fine on an ubuntu server, when I try to use it on redhat it sometimes get stuck. the server is stuck on recvfrom and the client waits on the recv. if i add a delay in the server or run the client through strace everything works fine.
[code]...
View 3 Replies
View Related
Sep 28, 2010
I recently installed F13 on my Toshiba Satellite C650. It has a buggy ACPI which no linux distro till date supports. I got that covered though. But my problem is that the ethernet port works only if the kernel is >=2.34. But F13 came with 2.33.
I do not have an access to a wireless network. Please tell me how to update the kernel without connecting to internet directly. I am new to Fedora. I have been using Ubuntu for some time and this can be achived in ubuntu by downloading the DEB packages and dependencies.
View 14 Replies
View Related
Sep 30, 2010
I have a Laptop with Ubuntu on it, a Desktop with SnowLep and a server running Ubuntu. What I want to do is have the same Desktop (/home/lucian/Desktop) from server mounted on both other machines. I am using a wireless connection and I want to make it mount at startup. I already have the Ubuntu setup, but not at startup the SNowLep is harder and I could not do it yet.
View 1 Replies
View Related
Mar 6, 2010
I have a directory that contains a bunch of sound directories containing WAV files.I want to make a script that plays one, waits 500ms, plays one, waits, etc.i tried cat `find . -name *.wav && sleep 1` > /dev/dsp.It plays them but with no delay between.
View 13 Replies
View Related
May 14, 2010
iSCSI Server, can I change the default port 3260 to other port ?
View 1 Replies
View Related
Mar 24, 2010
Issue with the 'host' command that comes with bind-utils package.We don't have any browsing/name resolution issues except to the following two sites:
[code]....
command [URL] returned:
www.aeroplan.com is an alias for www.halb.aeroplan.com.
www.halb.aeroplan.com has address 207.34.195.17
;; connection timed out; no servers could be reached
;; connection timed out; no servers could be reached
[code].....
I have tried to run the "host" command against different DNS caching servers I have access to all produced the same timed out error. I called Aeroplan technical support to report the issue to them and from their perspective, they have no problem accessing the website.And we don't have any problem accessing any websites ourselves if "host" return A record lookup without the timed out error.
1. It's not our firewall filtering out packet. I tried it on external facing server without firewall and got the same result.
2. It's not our DNS caching server cause same errors are observed on our ISP caching server.
3. It works on an altogether network, from a Windows Vista desktop, through IE 8.
View 1 Replies
View Related
Jul 10, 2009
I connected two machines, I have their given of the addresses ip in a static way and not with DHCP. I gave to the machine server the address: 192.168.0.1, and in the machine client the address 192.168.0.2.
View 5 Replies
View Related
May 9, 2011
We have a mac book connected to our network. It can surf the web and even get into our network files. However, these network files are on linux, and finding the open files (not password protected) is fine. But we need the mac book to get into the protected files to edit our media. When we connect to the linux server, there is a pop-up asking for a login. We enter the correct credentials that work for everyone else to get into our protected files, but these credentials don't work... There is a message that pops up: "This operation cannot be completed because the original file '<file_name_here>' cannot be found." But it found the other open files...? what do we do to get this to work? The macbook is 'os x' and the linux server is 'fedora 10'
View 1 Replies
View Related
Jun 8, 2010
I have installed SUSE 11.2 and have performed update software manually, using YaST > Online Update. This all appears to be successful. I am getting an error dialog that says Problem connecting to a software source There was a (possibly temporary) problem connecting to a software source. Pleas check the detailed error for further updates. the details are as follows:
[Code]....
View 1 Replies
View Related
Feb 15, 2009
In fedora 10 I want to browse the share files in our windows network. When I want to use 'connect to server' with user name and password. It says:
"Cannot display location smb://servername/"
"No application is registered as handling this file".
View 2 Replies
View Related
Mar 7, 2011
Problem with fedora 13, I am no longer able set up a virtual private network using vpn. The following error message appers:
"/usr/sbin/vpnc: no response from target"
No problem when connecting with ubuntu or windows.
View 1 Replies
View Related
Oct 21, 2010
Just updated Meerkat - and the alsa-utils update did not go well. Aptitude reported an error trying to config. Anybody else with this problem? Workarounds or do we wait for a few days till the maintainers fix it?
View 2 Replies
View Related
Sep 4, 2010
Version 8.1. I am trying to update all software packages on my netbook. When I run the update manager and press check, it scans for a while saying downloading 1 of 15 packages and then returns with errors like:
W: Failed to fetch [URL] Unable to connect to 10.0.1.248 8080:
W: Some index files failed to download, they have been ignored, or old ones used instead.
how do I upgrade software on my netbook to their latest version?
View 4 Replies
View Related
Jul 3, 2009
I'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
View 1 Replies
View Related
May 25, 2011
Mu understanding of RFC 1122 (Fast Retransmit) is that upon receipt of the 3rd duplicate ACK, the sender should react by starting to retransmit the lost packets.
In my case, looking at the Wireshark trace, I see the sender receiving hundreds of DUP ACKS from the receiver and doing nothing about it until 200 ms pass by. Only then does the sender finally starts to retransmit. That's killing performance.
The sender is running Red Hat 5.3 (which is Linux 2.6.18). Is this an indication that the sender does not support Fast Retransmit? Is there a config param that I need to turn on?
View 1 Replies
View Related
Sep 18, 2010
I have a very strange problem with Fedora 13 on my home PC. When booting it just hangs at random points in the boot process. When it happend the first time, I thought the PC probably is completed frozen, but then I discovered that hitting the return button got the boot process going on again, but just step by step. That means on every boot I have to keep hitting the return button until gnome starts up, that's very annoying. So for any reason the boot process seems to switch to interactive mode somehow...
I already removed the kernel boot options rhgb and quiet to see, where exactly this happens in the boot process. But as I said, it seems to be completely random. Sometimes it's when "Starting udev", sometimes, when setting up eth card, when starting atd, and so on. It's different every time.
By the way, a similar thing happens when shutting down. It can take up to half an hour until the PC really shuts down. But it's usually going faster if I just keep hitting return after issueing the shutdown command (which actually looks a bit dull). But the PC finally shuts down at some point. That's not the case when booting up. I thought, maybe there's some kind of timeout problem. But even waiting for two hours, the PC does not startup without keeping hammering the return button
View 8 Replies
View Related
Aug 9, 2009
my fedora 10 booting stops at starting udev for 5-6 minutes.when i pressed 'i' for interactive , i see ata3(i think its my DVD-R/W) responding too slow. so, booting stops there till it responds.o/p of
Code:
dmesg | grep -i ata3
gives
[code]...
View 1 Replies
View Related
Jul 7, 2010
How do I set up a Linux box on my network so that I can SSH into it and control it using VNC from my Mac mini? I've tried ssh'ing into the Linux box, but it's not recognizing who the user is. How do I find that out so that I can set up ssh & VNC on the Linux box?
View 2 Replies
View Related
Jun 26, 2010
I installed it on a desktop today to try it out. So far I'm loving it and have gotten everything to work except for one thing:
There's a printer connected to it (HP PSC 1600), and I'd like the other computers on the network to be able to print to that computer. The other computers are running Windows 7, and one is running Snow Leopard.
When I plugged in the printer, Ubuntu recognized it almost immediately and installed it. Wonderful! I then went ahead and set it to be Shared, and hoped for the best. Neither the Windows machine or the OS X machine could find the printer...even after I pointed them directly at what I thought was the CUPS address (\mycomputername:631). To make matters even more confusing, I was able to set up shared folders and have the other computers be able to view them.
View 9 Replies
View Related
Oct 11, 2010
I'm unable to get my Ubuntu 10.04LTS to see my Mac 10.6.4 machine.
I've got Samba and AFP enabled under the Mac file sharing preferences.
Attempt1: From Ubuntu, I can see my Mac under Network>Places, but I'm unable to mount the location.
Attempt2: In Ubuntu, I went to Places>Connect to Server and entered the following:
Service: Windows Share
Server: [name of my mac]
Share: [name of my shared folder]
Folder:
User Name: [username]
Domain Name: WORKGROUP
With this entered, I was able to get as far as being prompted for my password, but was still unable to connect.
Attempt3: I followed the same steps above, but left Domain Name blank. Still nothing.
Are there any docs out there for the correct steps? I can only find posts on getting Mac to see Ubuntu, but not the other way around.
View 1 Replies
View Related
Jul 3, 2011
I am having problems connecting to my VNC server. The host machine is running fedora core 15.
In the past I have been able to connect to the machine, but for some I no longer can't.
I have done the following but still am unsure what problem is
1. Verfied the VNC server is running
2. Verified my user "trb" is in the vnc users list
3. I have checked that my port is open (at least i think). i launched a terminal and did "telnet 127.0.0.1 5902" and successfully connected.
My vncservers config file which is located in /etc/sysconfig/vncservers
Code:
Here is the log file from my latest connection attempt.
Code:
View 5 Replies
View Related
Jan 5, 2010
just loaded 9.10 and trying to install the NDIS wrapper so I can use my USB wirless adaptor. Executed the command
sudo apt-get install ndiswrapper-utils-1.9 as read in one of the forums and received the following error:
E: couldn't find package ndiswrapper-utils-1.9
both the tar version and the unzippedversion are on my desktop but I'm not sure they are installed and I don't know what to install. I've clicked every file in every folder most seem to be instructions not what I know as executables.
View 1 Replies
View Related
Mar 3, 2011
i have two subnets with different gateways.i am thinking of connecting them via a linux server which would enable them to communicate.but i dont know how to proceed for getting this done.how should the connection be made and what should be the configuration settings on the linux server.
View 2 Replies
View Related
Nov 10, 2010
I have 2 laptops, one is a Acer travelmate (running xubuntu) and another one is a Dell studio (Running Windows 7). I also have an iMac..2 external hard drive and a BSNL 3G usb data card. I want to setup a network so i can share my files and internet connection between the 3 systems. I don't know what i want to do is possible or not. what i want to do:
1) connect the usb data card to Acer and share the internet connection using the inbuilt wireless card in the laptop so that the dell and imac can access it.
2) connecting the 2 ext. hard drive to Acer and sharing the files over the same connection( wireless connection used to share internet with other systems) so that i can access the files from my dell and imac. I want to mention that i don't have a router.
if yes..how? and if not why? i'm a newbie..so plz help me..earlier also this forum helped me a lot in learning linux..hope this time also i will have some good experiences.
View 2 Replies
View Related
Jun 3, 2011
I have a home server that I have setup to connect to via SSH. All is working well with that. I would like to have the home server access the internet through a VPN. However, if I do this, I am no longer able to connect to the server via SSH, even though I know what its IP address is.
View 1 Replies
View Related
Apr 1, 2011
I have the following setup: An ADSL Router (192.168.4.1) which plugs into my server (that has 2 network cards) Server(eth0-connecting to the ADSL Router) = 192.168.4.2 Server(eth1-connecting to the windows XP PC) = 192.168.4.3 And the windows XP PC = 192.168.4.4 if I delete the entire routing table and add a default route route add default gw 192.168.4.1 dev eth0 I get an error (I can't remember the error, the PC's at work) however if I unplug the cable going from the PC to eth1, I can then successfully add the default route, and I can ping the router, however when I reconnect the cable to the PC and Server... I can still ping the router (from the server) but I cannot ping the PC
if I try and add another route such as: route add -net 192.168.4.0 netmask 255.255.255.0 gw 192.168.4.4 it wont let me add the rule I have a feeling i am doing something really stupid here with the addressing scheme,
View 2 Replies
View Related
May 7, 2010
i would like to connect from my home pc to my local machine at the university (fedora 12) behind a main university server(linux) through vnc. specifically,to connect normally through ssh/X to my local pc i have to ssh first to the main university server and then ssh to my local pc. Namelly:
ssh -Y -l loginname main.server.name
and then
ssh -Y my.local.machine.
On my local machine there is a vnc server running that I would like to access it from home (linux machine). Actually linux is running everywhere.
View 8 Replies
View Related
Sep 3, 2009
I want to use centos as a developer server on my desktop before deploying my stuff to the internet.
I have a netgear DG834G router. It's IP address on my local network is 192.168.0.1 and connected to the adsl line. The router is set up to act as an dhcp server too. On the router I have reserved ip address for the nics per their mac addresses.
My server is on a dual boot desktop. The other boot is XP and works fine, picks up dhcp.
I don't know how to connect Centos to the router.
I have tried to play with the network manager but to no avail.
I can ping localhost, interface eth0 is there, but i can't ping to the router.
I have set the manager system/administration/network to get dhcp automatically.
I can't activate the eth0 although the hardware device says it is OK.
I've looked at firewall and iptalbes.
View 2 Replies
View Related
Feb 2, 2010
I'm trying to connect to an XPpro machine using terminal server, I've been to the microsoft web sight and configured xp as they explain. Which consists of "allow remote desktop connections" and "re configure the fire wall", Done. I've obtained the ip address of the router and the user name and password of the xp machine and still I cannot access it!
View 6 Replies
View Related
