Fedora :: Log In Failure \ Using The Theme "wildbush" Caused XFCE To Crash?
Dec 26, 2010
I recently installed Fedora 14 and have been very pleased with how everything has been running. Unexpectedly, however, I was logged out of Fedora and have been unable to log back in since. When this happened, I was looking at the XFCE themes in preferences; I received a black screen and was then logged out (I believe that part of the error message read "buinit," although it passed very quickly so I may be wrong).Now every time I try to log in, the system tries for a few second, the screen goes black, and then it reverts to the same log in screen (with no error messages). Does anyone know what may be the cause of this problem?
Although I believe that it is unrelated, I updated the kernel approximately 30 minutes prior to this happening (2.6.35.10-74.fc14.x86_64 from ....10-72....). The system worked fine after the upgrade/reboot and the error occurred abruptly during regular computer use, so I do not believe that this is the source of the problem. I tried starting the older kernel version from GRUB, but am still getting this same issue.[URL]
View 1 Replies
ADVERTISEMENT
May 24, 2011
Just upgraded to Fedora 15 this afternoon, and for the most part there weren't any serious issues with it (except for rpmfusion lagging on a F15 yum repo). I installed the XFCE spin, and a lot of GNOME-specific apps don't respect my GTK+ theme at all. Screenshot: [URL]... On the left are two "XFCE" apps (Mousepad and Task Manager), on the right are two GNOME apps (gedit and the NetworkManager "Connection Information" window). Is there an easy way to fix this? I have a custom Murrine theme set, but the problem is still there using the built-in themes such as Glossy too.
View 1 Replies
View Related
Apr 1, 2009
At 4:00 pm on 4/1/2009 I accepted the offer to dowload and install a number of small improvements. This has always worked in the past. This time there were a few problems with the install, but I went ahead and rebooted. It stopped at grub, stage2.
I am now trying the rescue feature of my install CD. I will report on this later.
As for the always possible hardware failure, I have a raid setup, so I was not expecting this.
View 4 Replies
View Related
Dec 16, 2010
Last week my server crashed. I'm trying to diagnose the cause.
This is the relevant error message in /var/log/messages:
Code:
I'm assuming that I can conclude, then, that apache/httpd was the cause of the memory leak?
Next, I've been tracking my memory usage. Using top, this is an average memory load level for my server:
Code:
I'd like to confirm if my understanding of this data is correct, because Plesk indicates that my memory usage is only 50% or less. (Though I have read a number of reports indicating that Plesk's measurements are frequently wrong.)
Top says: Of the 2,073,156K total memory, 1,982,572K (95.63%) is being used, 90,584K (4.37%) is free. Of that sum, 421,948K (20.35%) are being used as buffers. Additionally, of the 2,096,472K of Swap, 60K is used, and 887,700K (42.34%) is cached.
My questions: Is my memory actually being 95% used? Or is the buffered quantity (20.35%) not a use of physical/virtual memory? (i.e. is it disk usage?) Does the amount of cached Swap influence the percentage of physical/virtual memory being used?
In other words, who is correct? Plesk says I'm using 40-50% of my memory, whereas top says 85-95%.
View 6 Replies
View Related
Feb 28, 2011
I'm new to Slackware (been on *buntu until now, and use Mint at work). And had to learn some things to make the system do what I want to. That was the aim actually, when I decided to install Slackware 13.1 instead of the Win 7 on my new laptop.And here is one of the two things that I have to do now, to make the system completely the same as I want it to be.I use a black theme - Audacious - on my XFCE on Slackware 13.1. And the skype doesn't use the theme. It stays originally light.
(At work I'm with Mint with LXDE, the same theme. Exactly. And the skype uses it. And looks very good ...)So, I tried the options in the skype options menu - General - Choose style. But no option has the desired effect.I plan to uninstall skype and either install it again from slackbuilds, or just download the static (or the dynamic) one from skype.com. But, if there is something else I can do - I'd prefer this way.PS: There is something curious also - OpenOffice on the Mint distro doesnt' use the theme. But OpenOffice on the laptop use it, and becomes black ... ?? ... I don't know if this tells something, but - I noticed this.
View 3 Replies
View Related
Aug 28, 2010
when I want to change theme (control center-> apparence, I don't know the name of the application), gnome-settings-deamon crash. When I lauch "apparence" again, gnome-settings-daemon is restarted and it make X restart ! The problem has come with the upgrade 11.2->11.3Here is the output of gnome-settings-daemon when it is restarted (when X crash)
Code:
** (gnome-settings-daemon:16223): WARNING **: Can not run apport-checkreports
(gnome-settings-daemon:16223): GLib-GObject-WARNING **: IA__g_object_notify: object class
[code]...
View 5 Replies
View Related
May 7, 2010
essentially everything runs well, but at random points the screen randomly flickers and looks like an application window outline. After I use the system for a while eventually the screen goes blank, but not off, but I am forced to shutdownhe system as nothing happens with key combos. I'd be happy to add more information, but I am need help on where to go to find information on the system
View 2 Replies
View Related
Mar 22, 2010
I have installed OpenSUSE 11.2 with KDE as my default DA I have installed KDE4 style "Polyester" from Yast > Install Software.
Now the problem is when I activate "Polyester" theme than all OpenOffice app will be broken. All OpenOffice application will start but closed immediately with crash. Also it will work perfectly with other KDE4 theme. Is this a bug or I need to setup something? I like the "Polyester" theme and I want to use it.
View 4 Replies
View Related
May 8, 2010
I'm trying to come up with a startup init script that will check to see if the system was shut down gracefully, or if it is rebooting from a poweroff or something similar?Anyone know of a way to check for this condition with the least amount of room for false positives or vice versa?My intial thought is just a startup script that will will check for a file on startup, and on a proper reboot/shutdown just touch the file. But id like to avoid that type of script if possible,
View 2 Replies
View Related
Sep 29, 2010
I have F12 and been using the livecd-creator command since F9 to create liveUSB devices which are used to install Fedora on all the systems (nearly 100) I support at different sites ensuring they have the same build/configuration. About a week ago, I created a new image and when I attempt to install to hard drive, there is an ABRT message displayed;
"A crash in the anaconda-12.46-2.fc12 package has been detected"
Also see attached file.Now I am not able to install to hard drive.
It appears this is a known bug which has been reported at url.and that there is not fix planned. Can anyone confirm this?
If this is the case, does it mean that the �Install to Hard Drive� feature will no longer be available?
View 2 Replies
View Related
Nov 1, 2009
Im trying to use a downloaded theme (from [URL]) om my FVWM window manager, but the theme depends on various programs that isn`t in the Fedora repository. Namely habak, trayer and rox-filer (the last one is optional though). Is there any way to download these programs and install them independantly?
View 2 Replies
View Related
Feb 21, 2011
I updated my laptop from F12 to F14 via preupgrade. After doing so, the standard mouse theme was active. So I installed the one I like again and set it as mouse theme. For some reason it is now a mixture of the one I installed and the standard theme. If I open a place in nautilus the displayed symbol is the right one while waiting, if I open something in control center I get the standard icon. Same problem with drag and drop, I always get the hand from the standard theme. I also tried the former standard theme Bluecurve and it was the same problem.Can anyone tell me what goes wrong with the theme? What has changed in F14, that the older themes won't work?
View 3 Replies
View Related
Jun 27, 2009
I'm running Fedora 11 x86_64 (GNOME) and I'm having a problem installing ANY themes from http://art.gnome.org. Any time I try to install a theme I get an error that it's "appears to not be a valid theme" When I first click the install button and navigate to my theme packages, I don't see the [dot] theme file, which is a red-flag. I change to "All files" and I tend to see an "index.theme". Is this the correct file?
View 3 Replies
View Related
May 12, 2009
I think the settings in /etc/X11/xconf.org are wrong. I do know what the settings should be and have SSH access, (root plus password). Being new to linux I cannot figure out how to save the file after editing. I have been using: vi /etc/X11/xconfig.org to get to the file, but haven't been able to save the file.
the edit and save commands I need, I hate to do an entire install since this is about my 6th install.
View 2 Replies
View Related
Mar 1, 2010
I installed fedora 10 recently in my lap which had Windows Vista Home Premium. And now there is a prob tat i could access only Fedora. If i try booting into Vista it says
"BootMgr is missing Press ctrl+alt+delete to restart" I came to know tat I shud have actually installed fedora first before windows. Now i wanted to know how to Get both fedora and windows in my laptop
View 11 Replies
View Related
Jun 14, 2011
I'm running Fedora 15 with current updates and kernel. I do not have anything special or non-standard about my configuration or setup. I use grsync to sync my home folder files to a remote rsync server on my network. I've checked my hard drives and my memory and everything else I can think. Here is the problem:
grsync will run for some time and once it nears completion it will crash. This, however, is no standard crash. It literally shuts my computer "OFF". I have shared the remote rsync folder through CIFS as well and I can copy those exact same files through nautilus with drag and drop without issue. I have had a few occasions where the rsync process will complete without issue, but this is a rare occasion. Since it powers my computer completely off I do not enjoy the luxury of having any log files or messages to attempt to diagnose from.
View 9 Replies
View Related
Jul 9, 2010
Like for instance, if I have Ubuntu Lucid Lynx installed with XFCE, and it has an applications made for XFCE. will the applications also work on say some other distro like, Wolvix, that is an XFCE-based distro~????
What I am trying to say is: Do applications that are made for XFCE, work on ANY distro that has XFCE installed?
View 9 Replies
View Related
Aug 8, 2011
Seems like the latest Kernel (2.6.40-4.fc15.i686) update screwed with my setup a little bit.
This is what happened:
I had about 100 updates to my F15 pending in my taskbar's update notifier.
I let the system update itself.
Reboot and desktop effects don't work.
Takes a long time to open up Dolphin.
electricsheep (OpenGL screen saver) doesn't work.
I'm assuming it's a problem with OpenGL or my nvidia video drivers which I tried reinstalling from mjmwired's guide.
That didn't fix anything.
I'm looking for a point in the right direction or a way to revert back to my previous state before the system updated everything.
View 1 Replies
View Related
May 4, 2011
For some reason, from time to time on login, as my normal theme starts to load, it changes to some sort of silver theme (a very basic one), and I am unable to change it over to any other theme. Checking the theme being used, it still says my desired one is set, but it is not. Also, no matter what theme I change it to, that basic silver theme is the one being used. This includes a default icon theme, not the one I prefer.
The only option that seems to fix things is a restart, and the hope that on this login it won't mess up like before.I am using Natty, from a fresh install, with Ubuntu Classic as my desktop, and have reinstalled things more than once to try and fix a few of the Natty-related issues, but this one keeps coming back.
View 9 Replies
View Related
Jun 10, 2011
What does this error mean i try to save it and get this? Irssi: Error saving theme to /home/perlsyntax/.irssi/default.theme: Permission denied
View 3 Replies
View Related
Mar 31, 2011
I backed up .themes from /home, but on trying to install them (files don't show as theme packages) it says "There was an error installing the selected file, index.theme doesn't appear to be a valid theme". Did I backup the right thing?
View 1 Replies
View Related
Jul 5, 2015
Since I updated my system a couple of days ago, qpdfview uses a generic theme instead of the Gtk theme. Apparently by adding
Code: Select allexport QT_STYLE_OVERRIDE=gtk.
to /etc/profile all QT5 apps should use the gtk theme but for some reason this doesn't seem to work.
Adding -style=gtk to the launcher options works but I want to change the theme setting for all QT5 apps.
View 8 Replies
View Related
Jun 3, 2011
i am using opensuse 11.4 and i reinstalled it 4 days before.i have changed the cursor theme,login theme etc.after the reinstall i forgot how to change them.so please tell me how to change cursor theme,login theme,boot splash?
View 7 Replies
View Related
Aug 4, 2011
I enjoy using vim from lxterminal with the black background, as well as awesome with its dark theme. I configured xfe manually to be darkish, and i use darklooks as a GTK theme to suit it as well. I could say all my desktop looks pretty dark, which my eyes thank me for. I also use redshift.But problems come along when surfing the web. Most web pages (including this one) have very bright styles. They are not the problem themselves, but switching from my windows hurts my eyes since it's a quick change to a much brighter screen.What would you do, either:
1. Use everything with a brighter background and putting the screen brightness a bit lower. (changing the GTK theme to clearlooks, using lxterminal with a white background, etc.)
2. Use some color theme with uzbl so that pages would look much darker. (like when you set manually the text and background colors in Firefox/Iceweasel)
I would myself go with the second one if most pages wouldn't look that bad when modified that way. For example, many pages use non-transparent images with white backgrounds on white pages, so if you change the background to black not only it looks horrible but it too is a mess.
View 4 Replies
View Related
Mar 7, 2010
I want to use gtk-theme-switch to change my theme in openbox (would rather not use any gnome/kde/etc.. tools for this), but after installing it I cannot get it to run:
Quote:
tr@linux:~$ sudo apt-get install gtk-theme-switch
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 2 Replies
View Related
Aug 15, 2010
I installed a theme in emerald, and it didn't do anything, like, it had no effect on my windows or anything. So i did some searching and the only thing i could find was to run "emerald --replace" in the terminal, and it worked, but if I exit out of the terminal, it reverts back to the old theme.How do I keep emerald's theme, even after I exit the terminal?
View 5 Replies
View Related
May 5, 2011
I was ubuntu 10.10 user and i installed macubuntu theme there but recently i upgraded my ubuntu to 11.04 and now the macubuntu theme is still exist. But i don want to make it avail anymore. how can i remove the theme from ubuntu 11.04 to use default theme of 11.04?
View 1 Replies
View Related
Oct 28, 2010
I am fairly new to linux but have been working with it for a good 3 months now, as usual linpus is giving me some hassle.I did the basic hack a while ago and everything was fine until the other day.I deleted firefox as it wasnt working properly and for some reason unknown to me firefox deleted some core pieces of info for the entire desktop....all i have is the bottom bar and the search bar...if i go through my files and run some xfce files; few of which will now load, i can get a basic desktop with some icons(file system, user files, SD card)but it only stays on for that load, if i start the laptop again its gone and i have to go through the whole process again.
everything runs fine just no desktop and it wont keep the simple desktop (if not better than original linpus desktop up) is there any code i can use in terminal to lock the desktop when i get it to the point i can get it to...?is there any code i can use to system restore to an earlier date, or similar?I have been thinking about downloading ubuntu and installing that as i have used that before and found it wonderful, problem being as its an acer onethere is no CD drive and now that everything is kaput it wont accept USB sticks either. know this can be done and i know i can find coding to get the usb drives to work again so no problem there, its just the whole desktop being shot is the issue reallyany help would be greatly appreciated ive been sifting through forums for 2 days now and i cant find any similar problem
View 2 Replies
View Related
Nov 14, 2009
During my two previous installation, I almost never try to include or exclude package during the process. I want to know if I only want to install XFCE as my only DE, how can i do it during the installation progress (I Know i can install both, or even with KDE, but I also know that i can do it later should I change my mind)?
Second question is, if I install only XFCE, what will I miss ?(no, not the gnome feature, but maybe fedora distro(gnome) specific tool or something). Last word, no I'm not asking what feature of gnome is absent in xfce nor which DE is better, so don't start it.
View 7 Replies
View Related
Mar 6, 2010
last night I updated F12 XFCE on my Acer Aspire One 8Gb SSD, there were about 140+ issues to update.
after reboot the dialog to select a user and login appeared, continuing nothing shows up -- no menu, no taskbar, no volumes, just the beautiful F12 background.
pressing ALT - F2 I am able to start commands, eg Thunar shows up displaying all volumes, files and even NFS remote drives. my conclusion is that everything works except the desktop...
how I can start the XFCE desktop environment so I can use the GUI?
View 14 Replies
View Related
