I think the settings in /etc/X11/xconf.org are wrong. I do know what the settings should be and have SSH access, (root plus password). Being new to linux I cannot figure out how to save the file after editing. I have been using: vi /etc/X11/xconfig.org to get to the file, but haven't been able to save the file.
the edit and save commands I need, I hate to do an entire install since this is about my 6th install.
I cannot install Fedora core 10. It boots up and it gets to the Fedora 10 loading screen. After that it complains my monitor is out of Range and that's as far as I can go. I had originally thought I could get to some text install mode, but I don't make it far enough to do that.
View 1 Replies View RelatedI run Windows 7 on my home PC and I recently installed Fedora 14 on my USB. When I boot from the USB, I see the Fedora loading screen (3 bars overlaying each other), but once its fully loaded and goes to move forward, both my monitors go blank, one says "Out of Range", the other "No Input".
View 1 Replies View RelatedMy last Linux install was SUSE 6 on an early ISA based Pentium clone. I'm used to Unix / bash from OS X, MinGW, QNX & BeOS... none of these rely heavily on X. But I'm thinking that Linux is so popular, I'm doing a lot of my Windows stuff under MinGW, why not just stick Linux on and be done with it.So I've polled the various distros, I'm a power-user / dev so Ubuntu doesn't seem like me, and I'm not familiar enough with Linux to go Gentoo just yet, but the way I slim Windows and OS X installs down to just what I need. I love apt-get and like FreeBSD installs I've seen, but want some Linux kernel goodness for my self, so I have chosen Debian.
I grabbed the amd64 build of lenny DVD 1, partitioned up and installed a bare system that I can apt-get the bits I want later.Here's the problem... When the install completes rebooting sends the graphical login to a frequency my old Hanns-G TFT can't handle.I can Ctrl-Alt-F1 back to the terminal or boot in single user mode, and everything seems to be good until you go GUI.Here's what I've tried.
I've renamed /etc/X11/xorg.conf to /etc/X11/xorg.conf.oldI ran dpkg-reconfigure xserver-xorgI've reinstalled using both simple GUI and Expert GUI using both kernelsI've tried adding nvidia-* packages with apt-get and aptitudeI remember there used to be a frequency tuner app for SUSE 6 and XFree86, but it seems that sort of thing is depreciated in modern Linux.Info? My GFX card is an nvidia GT 220, the motherboard is an ASUS P5QL Pro, the Monitor (Hanns-G) is attached via RGB HD-15 D-Sub (sadly that's all I have access to right now) and it's native resolution is 1280x1024 4:3 @ 60Hz, but in heXPee it will sync at that resolution at 60, 70, 72 or 75Hz, though it does get fuzzy at 75Hz.I'm fairly certain that X is working, just not at a frequency my screen can display... how can I fix this from single user, or regular bash terminal?
---edit--- Forgot to mention I ran dpkg-reconfigure on the XServer. :s It didn't offer video drivers, only to change from gb 105 keyboard layout and ps/2 mouse. I set the META key to the logo key while I was there, but it wasn't really helpful in any other way.
I am running an AMD Athlon 64 with an NVIDIA 6600 video built into the motherboard (PC Chips). My monitor is a 19" LCD with a standard VGA connector. I tried installing Lenny and everything went smoothly. However, when I rebooted, the monitor said "Signal out of range." I had this happen with a live CD of another distro too.
View 1 Replies View RelatedI just updated my Wubi install of 9.10 to 10.04 last night. Everything went well until it required me to reboot the computer. I rebooted, loaded Ubuntu from the startup list, and then the screen went blank and I got "H.V. frequency over range" on the monitor.
I can load the GRUB options, but recovery mode using the most recent kernel does not work. I am entirely unexperienced with using the terminal and command prompt options.
Here's what I have attempted so far:
$ sudo dpkg-reconfigure xserver-xorg this did not do anything, the command was not recognized
$sudo nano xorg.config I don't even know what to do when I get to this screen
and I am about to try $ sudo displayconfig-gtk
I have an ATI Radeon 9100 IGP card
this has happened with a few different attempts of ubuntu based distros lately ... i try to boot a live cd it gets to where it starts loading and the monitor pops off and says input out of range ... im aware that this is a known bug with xorg choosing either the wrong resolution or refresh rate ... but what the heck are we supposed to do , i can't get far enough into the boot process that i can open a terminal and try to bypass xorg ... so will all future distributions of ubuntu just be out of the question for me ? if you ask me what needs to be done is make the installer ASK what resolution you want to attempt to boot at .... similar to what puppy does
View 2 Replies View RelatedI've just installed Karmic and get an Out Of Range message on my monitor when starting.I had to use the alternate install in order to get Karmic on there in the first place.I have an Nvidia GeForce 7600 GS, and a BenQ FP767-12 TFT.
Output of lspci;01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2)Not sure how to get my xorg.conf as I can only get to a shell. Here are (what I think are) the important bits;
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "screen0" 0 0
EndSection
Section "Module"
[Code]...
My brother got a new 120hz monitor, but can only get the old one to work. If he boots up with both of them connected in windows xp they work fine, but in Ubuntu 10 only the old one works. If he tries to detect the monitor in Display Preferences, nothing happens. The old monitor is connected to vga output (lcd with vga only) the new monitor is connected to dvi with a dual-link dvi cable. We know the graphics cards cannot provide 120hz, for now we run the monitor at 60hz until he upgrades the rest of the pc (sandy bridge i guess).The 120hz monitor worked fine until he changed graphics card from a ATI radeon 9200 to a geforce 3 ti 500.
He has tried
sudo dpkg-reconfigure xserver-xorg
and detect monitor in Display Preferences but no dice. Could he try restricted drivers?
System specs:
Ubuntu 10.04 32bit
athlon xp 1700mhz
1GB ram
ati radeon 9200
geforce 3 ti 500
lg w2363d
I am installing SuSe 11.3, and during the initial boot after installation, I got "out of range" message on the monitor and nothing happens afterwards.My PC is dual CPU (intel), Video card is " nVidia N240GT" and the monitor is Gateway flat screen "FPD2485W".I tried both interfaces (gnome and KDE) and got the same problem ("out of range")
View 4 Replies View RelatedI am using an external monitor for my laptop to run Ubuntu with. I just updated Ubuntu today, but when it is about to reach the Ubuntu login screen, then the monitor says "out of range." Now, Ubuntu boots up into the GUI if I unplug my monitor and use my laptop screen, but I prefer to use the external display. I have tried all of the suggestions from my search results in Google. I did Ctrl + Alt + +, but nothing happens. I did Ctrl + Alt + -, but nothing happens.
I used Ctrl + Alt + F2 to get into a terminal to run the command: sudo dpkg-reconfigure xserver-xorg, but nothing happens. I believe there are supposed to be options to change the settings, but it does not even give me any. I tried to edit /etc/usplash.conf and /nano/etc/usplash.conf, but they do not exist. My monitor is a Westinghouse 22" LCD with resolution 1680x1050. It has been working for the past few months until I updated it today.
I installed fedora 10 recently in my lap which had Windows Vista Home Premium. And now there is a prob tat i could access only Fedora. If i try booting into Vista it says
"BootMgr is missing Press ctrl+alt+delete to restart" I came to know tat I shud have actually installed fedora first before windows. Now i wanted to know how to Get both fedora and windows in my laptop
i just did a graphic install of debian lenny and when i finished the installation and restarted the computer the grub boot menu appeared and i selected debian and nothing happened the monitor just displayed a message saying "out of range" i have a dell studio xps 1800is it my graphics card (it shouldn't be) how do i start x server in a different resolution (if screen resolution is the problem
View 9 Replies View RelatedI have recently got the Linux bible 2010 and it came with a cd and dvd containing multiple distro's of linux. I have tried them all with the same problem. Everything until the actual GUI desktop shows up from the live disks as well as an actual debian install, when I get to the desktop however out of range shows up. I have a video card hooked up, figured that might be the problem, it was not. I tried the on-board video and it also did the same thing. I also tried a different monitor, which did not work.
View 3 Replies View RelatedI am a Windows Server guy trying to stay afloat on this Linux installation I am doing so please bear with me. I have installed RHEL 5 and installed the updated NVIDIA 256.53 certified driver. Upon rebooting everything was great. I got to the X server login and entered my user name and password. The very next thing I see is "Out of Range" error on my monitor. I know that I needed to verify that my xorg.conf file had the proper refresh rates specified in it for my monitor, which I have done.
View 3 Replies View Relatedthe electric went off and when it come back on my monitor picture was all out of range. I changed the resolution to bring the picture back in and now the words are almost unreadable.
View 1 Replies View RelatedI've recently reinstalled a computer with 10.04 for my parents to use, and it worked fine at mine, but after transporting it to theirs and hooking it up to their existing monitor it doesn't seem to work anymore!Well, it boots and I hear it login but I don't get a splash screen and at some point between the bios and the login sound it comes up with Frequency out of Range. On the warning message it displays a frequency of "72.9 kHz / 90.2 Hz" but in the monitor settings its reporting that its operating at horizontal 64,0 kHz and vertical 60.0 Hz. I also don't get any splash screen when starting up, just a flashing _ before the monitor stops things
What I can do however is drop into a the tty console (alt+ctrl+1) and login to the shell but don't really know what things to change from there.Having googled things a bit I've found references to xorg.conf but there's no such thing on my system so I can't edit that to fix this. Likewise I also have found references to fiddling with grub to get into the recovery, but grub doesn't even appear when I boot and I don't know what to press to get it to drop into its menu...
This is really urgent as I need to go home tomorrow at the latest and I want to get my parents system working before then. I also have no spare monitors here and I didn't think to bring with me a liveCD to fiddle with things (only a UNR netbook which I'm posting this from), so the console is the only access I have to the machine.Some specs: Ubuntu 10.04. ATi Radeon 9100 IGP, no proprietary drivers are installed. The monitor is an old CRT that still works beautifully and whose replacement is not an option.
Fedora RedHat Enterprise 5 X version 7.1.1
I've been digging around for a while to try and come up with some solutions, and I'm finally caving and asking for help.I have two PCIe nvidia cards, each with one DVI and two displayport outputs. I know it's a gigantic mess right now as I've been experimenting a lot. If someone can suggest a basic skeleton xorg.conf for one x-screen on GPU-0, one display on GPU-1 cloned onto ANOTHER display on GPU-1 (preferably with a different frequency), it would be much appreciated.
I have installed Fedora 15 but find that there is no option for setting the Refresh Rate in Display Settings. This is needed since when I set the Screen Resolution to 1024 x 768, the vertical scroll bar goes out of the screen.
View 1 Replies View Relatedi tried to install linux mint, at first i got 'out of range' with black screen msg but used compability mode and got past it and installed mint on my HD. a moment after it updated my nvidia drivers and after reboot I got the out of range message again, which leaves me in the situation where i cant do pretty much anything I tried editing xorg.conf added VertRefresh 60-75 and Modes "1440x900_75.00"
View 4 Replies View RelatedI basically destroyed my laptop a couple of years ago. Windows XP wouldn't even start but it didn't come with an installation disk. I tried recovering it but it just died. So a few months ago I put a box of thing on top of it which broke the screen! I was going to chuck it out until I stumbled upon a page which told you you could use it as a web server.
I decided to use it to host my website. I installed ubuntu without a problem however it wasn't until I was about to start it up I found out it was against BT's terms and conditions!! So since I installed ubuntu I thought I might as well make use of it and use it to render my files. When I went to turn it on for the second time and plugged it into the monitor it said input signal out of range!
I can see the login screen but I can't move the mouse or anything. I can't access the terminal, how can fix this?
I just installed Ubuntu server on one of my computers, but when I boot up the screen goes blank and the monitor gives me an 'Out of Range' error. I understand that this means that the resolution settings are too large for the monitor, but I don't understand how to change them, since there is no GUI installed. Details:
Monitor:
LCD
Recommended Resolution is 1280x1024
I have also tried it on another monitor with a recommended resolution of 1920x1080, This also gave me an OOR error. Ubuntu Server version 11.04
I have tried installing the ATi drivers via the 1-click install process, however when I get to init 3 and try to run sax2 (sax2 -r -m 0=fglrx) my monitor just goes out of range. I have tried this in both OpenSuSE 11.1 and 11.0 - both the same. I have tried running sax2 with the -l switch for low resolution - no change. I have also tried the switch "--vesa 0:800x600@60" and "--vesa 0:1024x768@60" which are known resolutions/requencies that this monitor supports (the latter is the native resolution) - no change.
I have tried another monitor but it's exactly the same. My video card is an ATi Radeon HD2600AGP and is correctly identified by OpenSuSE, and displays video fine using the default driver.
I am on ubuntu 9.04. I have nVidia 8500GT and I installed Warsow 0.5 today.When I start the game my monitor goes black with a message "Out Of Range"I can only hear the music.I tried hitting a few keys here and there and I could also hear the tutorial start.
View 1 Replies View RelatedI have an hp vs17e monitor and I am running slax linux But I have absolutely no idea how to fix the error resolution out of range on my computer monitor.it then shuts off and I can turn it back on and it'll do the same thing.
View 1 Replies View RelatedI would like to set a double range of IP address with my DHCP3-server. Now, I have eth0 (which is my only network card) with this IP address : 172.16.93.1 and I have created a second interface eth0:1 with this address: 192.168.3.1. The goal is to give an IP address 172.16.93.X to phones (with option 66) and the IP address 192.168.3.X to the computers.
This is my DHCPD.conf :
ddns-update-style none;
option domain-name "mycompany.com";
option domain-name-servers 172.16.93.1;
default-lease-time 3600;
max-lease-time 2347200;
authoritative;
log-facility local7;
option ip-forwarding off;
default-lease-time 20;
max-lease-time 20; .....
Right now my DHCP server work fine, (I means, no error at the startup ) but the server give always the same kind of IP address, whatever if it's a phone or a computer. I notice something "wired", if I put the :
subnet 192.168.3.0 netmask 255.255.255.0 {
range 192.168.3.100 192.168.3.199;
option routers 192.168.3.254; }
(Which is first in the dhcpd.conf) after the "subnet 172.16.93.0 netmask 255.255.255.0", the server will give IP address 172.16.93.X at all the clients. Is it possible to give more than one IP range with one network card at the same time? And how set the option 66 to only give IP address (172.16.93.X) to the phones?
I just installed ubuntu in a dual boot with Windows 7, I have a new emachines pc compact with 3gb ram 2.8 amd processor, and nvidia 6150 integrated. I cannot see the boot menu, so now I cannot go back into windows anymore becaue I am receiving the message "monitor out of range change to 1600x900" so it just automatically boots into ubuntu. I have searched alot on this topic, and have tried giving terminal commands specified for thiis issue, but the termnal does not recognize the commands. I am logging in and am typing "sudo" before I go into configutration. I am BRAND NEW to linux and am really struggling with this.
my monitor is a 4 month old HP 2010
Display size
50.8 cm (20")
Display type
Wide Thin Film Transistor Liquid Crystal Display active matrix
Aspect ratio
[Code]...
fglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
Last Thursday, 3/11, I installed a new mother board (ASUS M4A785TD-V EVO), AMD Athlon II X4 Processor, 4Gig DDR3 ram (RIP JAWS), 1 SATA DVD drive, along with my 2 IDE HDD's. The display was OK during BIOS review, and boot UNTIL it came to mounting x-graphics, at which point the screen went black, and a display message came up saying Out-of-RangeHf: 30KHz-70KHzVf: 50Hz-90HzCurrent Frequency:90.3KHz, 60.0Hz.
Does anyone know what is causing this? I mean, is there no way that Deb 5 X86 is going to run on a quad 64-bit system, or can something else be wrong? Before changing hardware, I had seen indications that this system was backward-compatible to older systems, and the more in depth study I've done since seems to verify this.y be, however, that I completely mis-understand what I am reading - this is all pretty new to me.
I tried booting into Debian 4, Libranet 3, and Linspire 6. They all complained loudly, but differently, about x being inoperable. I can't tell you how they complained because I can't go back and check them. THAT is because, in BIOS, I was testing the system with all the different options for "Internal Graphics", to see if one would work. One of these options was "Disabled". Oh-ho-ho! BAD MOVE!!! it's disabled, all right, including BIOS! I can't believe it. There was no warning, whatsoever. I assumed no engineer in his right mind would allow that option to lock out the BIOS without SOME kind of warning. I'm going to try to call ASUS tech support tomorrow to see if they have a solution, but if anyone knows how to reverse this, please let me know. I suppose the only answer is a separate graphics board. But I don't want to get that if I can't use this MotherBd.-processor setup.
After installing the driver of nvidia GEForce 9800 GT on RHEL5.5 the monitor goes out of range ?? What to do ?
View 5 Replies View Related