essentially everything runs well, but at random points the screen randomly flickers and looks like an application window outline. After I use the system for a while eventually the screen goes blank, but not off, but I am forced to shutdownhe system as nothing happens with key combos. I'd be happy to add more information, but I am need help on where to go to find information on the system
View 2 Replies
I just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies View RelatedI have installed debian squeeze with XFCE following this tutorial:It worked well, but I have one problem: the resolution is not right. How could I change it?The only resolutions that are available right now are 1280x1024, 1024x768, 800x600, 640x780. I have a 19" wide screen, so the resolution should be 1440x900. I couldn't find xorg.conf since it seems new xorg doesn't need it anymore.
View 9 Replies View RelatedI have just installed Squeeze and my xfce works, but I don't get a panel, unless I start it manually withxfce4-panel &As this worked,ded it to the automatically started applications. I logged-out and then back in but no panel. I did a ps -ef | grep -i paneland the panel doesn't appear to be running.
View 4 Replies View RelatedThe laptop runs Debian Squeeze XFCE installed from the Live iso (uname -a gives 2.6.32-5-686 as the kernel) and has Wicd 1.7.0 for network management and uses the ipw2100 wifi firmware/drivers. It connects fine using WEP encryption at home and to unencrypted connections found in a couple of public areas. I have had one problem with a WEP encrypted connection in a cafe (got through encryption, but could not get an IP address. There are workarounds which I will try next time I have coffee there When changing my router to use WPA2, I get 'bad password' errors. There is quite a literature on 'bad password errors' and Wicd and kernel 2.6.32, however a lot of the pages are contradictory. The Wicd log showed this...
2011/06/07 17:25:59 :: WPA_CLI RESULT IS ASSOCIATING
2011/06/07 17:26:00 :: wpa_supplicant authentication may have failed.
2011/06/07 17:26:00 :: connect result is Failed
[code]...
I'm fine using WEP at home, but I need to connect out and about as well and meet WPA2 connections in some locations
I have been an Ubuntu user for the past two years and have recently made the switch to Debian, so while not new to GNU/Linux or Debian-like distributions I am still learning on many fronts. Installing squeeze directly caused issues with my Wi-Fi for some reason, so I installed lenny and performed aptitude safe-upgrade (full-upgrade kept breaking the system), and took care of stray packages manually to get a working squeeze system. My desktop environment of choice is Xfce, using XDM.
Ever since the upgrade, both the login prompt and the actual desktop have had a black background with no icons or right-click menu. I am guessing that the issue is a daemon that should be running but isn't, although I have no idea where to begin troubleshooting the issue, which is why I came here. I've uploaded at of my desktop here Right-clicking in the black space doesn't do anything, and changing my wallpaper settings is ineffective.It's not a huge problem for me, as everything else in the system appears to work, but I would like to figure out what the problem is, fix it, and maybe learn something about Debian in the process.
I'm running squeeze on i686, my last update was this morning (9/9/2010). Running the stock kernel 2.6.32-5-686
My PC keeps crashing when copying files. The monitor displays the desktop, but the mouse doesn't move, nothing responds and I can't even ssh in to debug it.
This happens when copying files using nautilus and the command line. I'm trying to copy files from my local hard disk to an nfs drive which is mounted in my system and has been working fine for years.
how to debug this after a hard reboot?
This has only just started happening, last night was the first time.
I'm using Debian-Squeeze, and the command "uname -a" results in "Linux debian 2.6.32-5-amd64 #1 SMP Sat Jul 24 01:47:24 UTC 2010 x86_64 GNU/Linux". The desktop environment is Gnome 2.30.2.
My problem is wireless connection causes the system to crash. Here is the detail: my university uses a WiFi service that we have to enter our ID and password in a certain web page in the browser to get access to the Internet, while the WiFi signal is automatically picked up. My laptop crashes each time I connecting to such wireless network. But back home, when connecting to my own WiFi, everything is all right.
As the only thing I can do when such crash happens is to press the power button to force the computer to shut down, I've gathered no more information till now.
Does anyone know what's wrong and how to fix it?
I have a problem with Debian Squeeze. I have installed Squeeze and after that I installed LDAP according tho this guide: [URL]. When I log in and try to start Epiphany or Iceweasel nothing happens. I tried installing Chromium, but this program starts with the message "Chromium didn't shut down correctly". After some waiting it comes with another messages saying "Page(s) unresponsive. I also noticed that Open Office won't startup, other programs don't seem to have a problem.
View 2 Replies View RelatedI've a problem with Karmic Koala and my macbook1.1 when i plugin hearphones I can't hear sound in it and in the speaker. many thread suggest to use alsamixer but I've only this settings I've NO alsa.conf setting in /etc/modprobe.d/
View 3 Replies View RelatedUsing Squeeze. After updating some webkit related packages (Mar 11 2011) some animated GIFs are not working properly in Epiphany or in Midori. In Iceweasel they are ok.
Packages I'm referring to:
gir1.0-webkit-1.0
libwebkit-1.0-2
libwebkit-1.0-common
Frozen and flickering:
[Code]...
Would someone have some kind of solution or workaround? Or should I just wait for a fix, coming perhaps with the next point release?
I recently installed Fedora 14 and have been very pleased with how everything has been running. Unexpectedly, however, I was logged out of Fedora and have been unable to log back in since. When this happened, I was looking at the XFCE themes in preferences; I received a black screen and was then logged out (I believe that part of the error message read "buinit," although it passed very quickly so I may be wrong).Now every time I try to log in, the system tries for a few second, the screen goes black, and then it reverts to the same log in screen (with no error messages). Does anyone know what may be the cause of this problem?
Although I believe that it is unrelated, I updated the kernel approximately 30 minutes prior to this happening (2.6.35.10-74.fc14.x86_64 from ....10-72....). The system worked fine after the upgrade/reboot and the error occurred abruptly during regular computer use, so I do not believe that this is the source of the problem. I tried starting the older kernel version from GRUB, but am still getting this same issue.[URL]
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies View RelatedJust got a pretty fresh install of Debian/XFCE. Both monitors work out of the box on my 8400GS. I was unable to find an option to change it so I can span is as 1 work space instead of having them mirrored.
View 2 Replies View RelatedLike for instance, if I have Ubuntu Lucid Lynx installed with XFCE, and it has an applications made for XFCE. will the applications also work on say some other distro like, Wolvix, that is an XFCE-based distro~????
What I am trying to say is: Do applications that are made for XFCE, work on ANY distro that has XFCE installed?
Deleted gnome completely after deciding on xfce.I am going directly to my login prompt on startup instead of going automatically into xfce desktop.What command do I use at startup to launch xfce? How do I get to go to xfce automatically on startup
View 4 Replies View RelatedI have installed Debian squeeze(testing) xfce. While I was changing selecting themes for the xfce window manager. It logged off and came to the login screen(gdm I think). On giving the username and password, it again comes to the same login screen. I can't get to the desktop.
View 14 Replies View RelatedI recently freshly installed Debian 8 (stable) XFCE.Everything was working fine. I installed Skype (using the instructions in the Debian wiki) and that worked no problem. I then installed libavcodec56-extra (just to have the extra codecs ready in case needed), and Synaptic also installed the i386 version also.After that, no sound (anywhere at all).I reinstalled libavcodec-56 (and the i386 version) to try to rectify the problem, but the sound has not returned.
As per a google seacrh, i installed pulse audio. This showed me that the the 'levels' were moving in line with the sounds which should have been playing, but no amount of tweaking managed to get the sound to come out. I have Mint installed on the same machine and the sound works fine here so i know for sure it is not a hardware issue.
I noticed recently my XFCE 4 is missing its background. I seem to have falled back to some gray background. I noticed icons/files that should be in desktop is also missing. Seems like desktop is broken somehow Whats wrong? The single panel holding window buttons etc is still working. ( debian jessie )
View 3 Replies View RelatedSo I'm having troublesome issues with Debian 8.2, one of them being really costly to my productivity. This issue started maybe a month or so back, and has been continuing since. Laptop is a Toshiba C50-B-14D
During every freeze all those happen:
Screen freezes (The whole display becomes frozen, with only cursor movement - Time displayed stays frozen too)No keyboard input (even Cap & Num Lock leds will not dim once pressed)Power button (pressing once will do nothing - I have to hold for an unhealthy shutdown and reboot)Touchpad Input Works (Cursor responses to movement only, clicks/change on-hover do not.) Fans become quiet
Today at 11:46, it happened while just running Chromium. At the time:
*XFCE4 Power Management Plugin
Presentation Mode [on]
Charger was connected
Here is the syslog (I know this isn't useful as it doesn't show what's causing the issue) the freeze happened at 11:46 and 11:57 is when I rebooted back into debian.
Code: Select all----------------------CUT------------------
Oct 30 08:31:01 Badook rtkit-daemon[1315]: Supervising 4 threads of 2 processes of 1 users.
Oct 30 08:31:01 Badook pulseaudio[1364]: [pulseaudio] pid.c: Daemon already running.
Oct 30 08:41:09 Badook kernel: [ 727.002897] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Oct 30 08:42:02 Badook pulseaudio[1312]: [alsa-sink-ALC233 Analog] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write!
[Code] ....
I also started noticing an INFO rcu message during startup:
Code: Select allroot@Badook:/# cat /var/log/syslog.1 | grep -i "rcu"
Oct 29 14:39:33 Badook kernel: [ 0.000000] Hierarchical RCU implementation.
Oct 29 14:39:33 Badook kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Oct 29 14:39:33 Badook kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
Oct 29 14:39:33 Badook kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Code] ....
After being away for a long time I decided to go back to Debian with XFCE. It came with XFCE 4.10 and I would like to install 4.12.
I've spent several hours trying things from forums and blogs but am so far unsuccessful.
I was having a problem with the sound not going up to a high volume on my machine, so I tried following some online tutorials and ended up destroying the sound system on my machine. Now, instead of just having quite sound, I have no sound. The machine is a Dell Precision server and the attached files show my sound configuration. Ideally, I would like a way to make the sound louder (>100%), but now I will settle for just having sound.
!!################################
!!ALSA Information Script v 0.4.64
!!################################
!!Script ran on: Tue Nov 3 19:49:23 UTC 2015
!!Linux Distribution
!!------------------
Debian GNU/Linux 8
l DISTRIB_DESCRIPTION="DebianEdu/Skolelinux" PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/"
[Code] .....
xfce 4.8 will be available in testing?
View 3 Replies View RelatedI have Squeeze with xfce desktop installed.
Howto set a "Time Zone" under xfce or which additional package should be installed to do that?
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedBelow is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I have a quite simple installation of Debian 8 Jessie XFCE and the resume from suspend is not working 9 out of 10 times. The system is single booted if that matters. I have found a few solutions to this problem but they were not suitable to my case as I don't have an Nvidia GPU but only Intel Onboard:
Code: Select all# lspci -v
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
Subsystem: Hewlett-Packard Company Device 2818
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0b <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 2818
[CODE]..
When I try to resume, I can hear the system booting but I can't see anything on the screen and the keyboard is not working either (no light on Num Lock and Caps Lock). The only option is to press the power button for a few seconds to stop the machine and then push again to start booting again.
In a debian squeeze box + Xfce the numlock is never enabled at login. Is there some daemon or some configuration to turn numlock on everytime I log into my Xfce session?
View 14 Replies View RelatedI just did a reinstall of Debian testing last night, and today I am configuring the system to my liking. I just clicked on the mixer in the tray, and the only option I get is Realtek ALC269. Before I could use ALSA. What happened, and how can I get ALSA back?
I did an "apt-get install alsa" to see if I could even get ALSA, and it downloaded and installed. I still can't seem to get ALSA working down there.
I installed Debian 6.0.1.a on Friday, but the problem is that installing xfce installed a few packages that have nothing to do with it, like Brasero and metacity. I'm using the xfwm but why were these extra packages installed? All I installed at the time were wicd, gdebi, xorg and xfce4. Everything is working fine...but why the extra bits?
View 11 Replies View Related
