Fedora Installation :: Fc14 Hangs After Kernel Update / Solution For This?
Aug 8, 2011
I am unable to boot with kernel 2.6.35.13-92.fc14.x86_64 which was installed while applying software updates. It hangs with the last message issued "Registering binary handler for Windows Applications". Searching led to it being related to a problem with the nvidia drivers. I followed the directions in several posts - delete /etc/X11/xorg.conf, reboot, run nvidia-xconfig, reboot and all is fine, but not in my case. The first reboot works but the screen is wrong. There is a 1 inch wide black border around the presentation window. If I then do the nvidia-xconfig and reboot, i am back to where I was before - boot hangs after issuing "Registering...". If I boot to the last good kernel, everything works fine. This happened to me once before and I was able to fix it by rebuilding the nvidia kernel (I think that was what I had to do), but I can't find out how to do that. I have akmod and kmod installed which are supposed to take care of this problem. I booted to kernel 13-92 recovery mode, deleted the xorg.conf file and ran nvidia-xconfig from there. Still fails. I don't know what to list here, but I will do my best to supply whatever is necessary.
View 1 Replies
ADVERTISEMENT
Feb 12, 2011
there is no sound in Fedora14 after kernel update (kernel-2.6.35.11-83.fc14). when use kernel-2.6.35.10-74.fc14 , I can listen to music.
View 14 Replies
View Related
May 1, 2011
It appears that the update process on or about 2011.04.28 downloaded and installed a non PAE kernel (kernel-2.6.35.12-90.fc14) on my box. Until this update, it has been installing PAE designated kernels. When this update occurred, it downloaded the PAE headers and debug, devel and debug-devel PAE components. Has anyone else noticed this in their update?
View 4 Replies
View Related
May 9, 2011
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
View 4 Replies
View Related
Dec 31, 2008
I have the following strange thing with a RHEL4 installation. Since last week, the system did a reboot and now something is really fucked up. During boot we get the following messages (don't care about 'strange' typo's, my colleague typed it 'blind' from the screen)
Code:
The strange thing is that we never see a 'could not mount blabla' or similar messages. First we thought it was a failing kernel update by plesk, but even after manually updating the kernel with RHN RPM's, still the same message. Booting with rescue mode and then chroot the system works. After that we even can start things like plesk and so on.
We double checked things with another RHEL4 install, and at least two things were odd:
1: the working machine has /dev/dm-0 and /dev/dm-1, the broken one doesn't
2: some files on /dev didn't have group root, but 252
We tried to recreate the /dev/dm-X nodes with [vgmknodes -v], output:
Code:
A fdisk /dev/sda shows: /dev/sda2 XX XXX XXXXX Linux LVM (I removed the numbers because this line is from another machine, but rest was identical)
We have a copy of the boot partition so if one need more info please let me know.
grub.conf:
Code:
last part of init extracted from initrd-2.6.9-78.0.8.ELsmp.img:
Code:
View 3 Replies
View Related
Apr 25, 2011
I have work through fedora project guides and got these messages beneath.
[code]...
View 4 Replies
View Related
May 27, 2011
After doing an upgrade from FC14 to FC15, I then updated the packages by doing:
yum update yum
yum clean all
yum --releasever=15 --disableplugin=presto distro-sync
I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64
Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows:
ImageMagick-c++-6.6.4.1-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '6.6.4.1', '15.fc14')
akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit)
alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) .....
Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
View 4 Replies
View Related
Sep 4, 2010
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
View 8 Replies
View Related
Mar 3, 2011
So I ran the update manager to install the latest kernel. It goes fine and was sitting at the restart prompt. I was playing minecraft and the entire system locked up - couldn't restart X or anything. Hard restart and I get a multitude of errors mostly dealing with not being able to find things in /dev/... It gives me a command line but I'm lost as to where to go from here to repair my system
View 2 Replies
View Related
Apr 28, 2011
Ubuntu-live-usb hangs And the only thing I see are Ubuntu and dots changing colours from orange to with. How may I see boot post and see where the problem are? I have check the disks by hold down -shift.
View 2 Replies
View Related
Dec 1, 2010
Ran the updater, went to boot to Win7 to use Photoshop and realized that the grub menu was gone. Ubuntu boots by default now. I tried running "sudo update-grub" at a virtual terminal and while it listed the various linux kernels ok, it then got caught in a loop spitting out some crazy looking errors. I rebooted and Ubuntu came up fine. I tried running "sudo update-grub" again from the gnome terminal and it hangs the whole computer for a few minutes and finally gives me this:
[Code]...
View 1 Replies
View Related
Aug 16, 2009
In F10 the boot sequence hangs just after loading anacron. I booted with interactive mode and after saying 'yes' to starting anacron I'm prompted to start 'local'. When I say yes, my system hangs.
I've seen quite a few posts regarding very similar issues that people were having. None of them seem to have a clear cut solution.
Some posts mentioned about the wrong video drivers, however I've been using the same video drivers for a couple of months now and never experienced this problem.
I looked at /etc/rc.local and all it has in it is 'touch /var/lock/sybsys/local'
I also looked at the file above and there is nothing in it.
Any ideas/solutions? Everything was working just fine the other day. so I'm completely baffled.
View 14 Replies
View Related
Dec 11, 2010
I've been attempting to install 32-bit Ubuntu 9.10 on my Dell Studio 1749 with the intention of making a dual-boot system. Attempting to install with a live CD using the default settings, I got as far as pressing ENTER on "Install Ubuntu" before the screen went completely black. The CD drive spun wildly, but nothing ever appeared on the screen. I tried the fix detailed here:
http://bennybeta.blogspot.com/2009/1...udio-1555.html
typing "nomodeset" as an option, and using the "apic=off" option. When I did this, I was no longer greeted with a blank black screen, but instead with a blinking cursor, but the installation still hung. The keyboard was unresponsive and I could not open a terminal. I also tried using the alternate installer instead, and got the same results.
After this, I tried installing using wubi, and on boot I get exactly the same results: black screen without "nomodeset" and a blinking cursor otherwise.
I should also mention that the same thing happens for every option on the installation screen, including the option to "try ubuntu" by booting from the CD.
Does anyone know what could be causing this issue, and how I might install ubuntu on my machine?
View 1 Replies
View Related
Feb 13, 2011
where you only get offered the kernel-headers for 2.6.35.11-83 by yum but not the kernel or the kernel-devel? I tried yum clean all and both pointing to the baseurl and mirrorlist and it does the same thing for both. Oddly my other laptop with F14 in the wireless cafe showed all three packages were available.
View 2 Replies
View Related
Apr 12, 2011
I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:
[Code]...
View 4 Replies
View Related
Feb 3, 2010
Linux distro:
Mandriva One 2010.0-KDE
kernel(after update):-> 2.6.31.12-desktop586-1mnb
Pentium 4 3.4GHz
Used to boot to kenrel 2.6.31.6 for the past 2 months updating my system whenever i was asked to-NO PROBLEMS so far(till yesterday in fact)Mandriva yesterday, offered a list of system updates including the kernel 2.6.31.12 and the respective Nvidia drivers.Boot to that kernel computer reacted as usual and everything seemed to run properly. HOWEVER,when i tried to shutdown the system everything powered off(hdd-keyboard) except the CPU(and the power supplier).I restart(manually) the system boot in and try to reboot it-NO Problem-logout NO Problem but FAILED TO SHUTDOWN PROPERLY AGAIN.
View 7 Replies
View Related
Dec 26, 2010
I tried this kernel released on Dec 21th. It makes my F14 constantly suddenly freeze in GUI with no keyboard/mouse response anymore before restart. Only thing to do in this situation is press power-off button and after restart I found no hint in logs.My laptop is thinkpad t400 and I think it's a very common installation.Now I revert to older kernel 2.6.35.9-64.fc14.i686 and it's works quite well.
View 14 Replies
View Related
Feb 11, 2011
I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]
View 6 Replies
View Related
Feb 17, 2010
Have had a clean perfectly working copy of 2.6.31.6-166 for months and after two updates to 2.6.31.12-174.2.3 and 2.6.31.12-174.2.19, neither of the newer kernel versions will allow machine to boot properly. Start-up hangs at the preload daemon with a flickering screen. To use machine, must use grub chooser and choose the original base kernel.
Running on Tyan h2000m board, opteron 2356, Nvidia 9800 GTX+ and 12GB of dram with SELinux security enabled.
View 2 Replies
View Related
Sep 1, 2011
The most recent kernel update, to version 2.6.38-11 has been a horror. It hangs on boot up. Sometimes I can get to the log in screen, then it hangs there as well. However, after 3-5 reboots (which is absolutely annoying to do when I just want to use my computer), it sometimes loads up finally. However, if I go to older Linux version in the Grub menu, then I can select 2.6.38-10 and it runs just fine.
So I am looking for a way to fix this problem, whether it be removing the most recent kernel update, or making 2.6.38-10 boot up by default. I noticed that the kernels are listed in the synaptic package manager, but I am afraid to remove the most recent one via synaptic. Is it as simple as removing the Linux version and headers I don't want, or are there other things I need to do in order to make 2.6.38-10 my default kernel at start-up?
View 5 Replies
View Related
Jun 3, 2011
I'm getting code...
every time i try to update. The number of bytes sometimes changes but it ends up always failing to download the full 862kB and suggests checking my Internet connection.... which is fine.
View 3 Replies
View Related
Jun 13, 2011
I ran an update last night just before I went to bed and shutdown my laptop.This morning, I turned on the computer and clicked on a link in an email. Firefox started but crashed almost immediatly. The same happened with Epiphany and Chrome. The only working browser I had left, was Opera.I started Firefox from the terminal, and saw this:
Code:
$ firefox
GLib-GIO-ERROR **: Settings schema 'apps.gecko-mediaplayer.preferences' is not installed
[code]...
View 2 Replies
View Related
Nov 19, 2009
Did a fresh install of Fedora 12 on a system w/ FC8. hd0 is an IDE drive, hd1 a SATA drive.I successfully preserved the partitions containing /home and several partitiosn containing video data. (This is a myth box.) I had the installer scrub out the / partition. Installed a relatively minimal set of packages.It's up and running!
I bring up Firefox and the Myth install and configure Wiki page. One of the first things it suggests is create a new environment variable, $KVER, then reboot. I do this. When I check out $KVER it tells me I'm running:
2.6.31.5-127.FC12.i686.PAE
Installed the atrpms repository information. I tried installing the rpmfusion repository, but apparently the FC12 information wasn't up yet. So, I thought I'd go atrpms-only. Per the wiki:
yum install nvidia-graphics
(My motherboard has Geforce 7050 / 630) There were a couple of errors about missing firmware during the install. Oi! I also noticed it downloading a new kernel. "Well!" I thought, "If the new kernel is messed up, I'll boot with the other from the grub menu, and try again."
Reboot. System stops dead after the BIOS hardware display. The message "FROM CD" shows. After that, nothing. Booted to Fedora 12 DVD. Hit Rescue. Confirmed that everything is there file system with. Confirmed that grub.conf was there, and looked OK. I edited it so the timeout wasn't zero and so the menu wasn't hidden.
Rebooted. Several times. Every time, it sticks right after the hardware display.I eventually looked up "master boot record" here and found some directions for resetting grub on the MBR. That did the trick.
View 1 Replies
View Related
Jan 19, 2010
On a new install of Fedora 12, I did the online update (using PackageKit). However, though the new kernel with images are seen in /etc/boot it still boots into the old kernel:
New-2.6.31.9-174.fc12
Old-2.6.31.5-174.fc12
Code:
$ uname -a
Linux LinuxFedora.HomePC 2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686
[code]...
View 7 Replies
View Related
Aug 23, 2009
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
View 2 Replies
View Related
Apr 12, 2011
Hello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies
View Related
Nov 13, 2010
I have a 1TB external USB drive that I'm having a lot of trouble with.
First I created a 500G partition, then formatted it with ext3. That went as expected.
Then I tried to copy a large (~50G) archive to it, and at about 13G it just stopped. I was using "watch" to view the progress, and it just stopped suddenly. I left it for quite a while, to see if it was actually doing something, just slowly, but nothing.
I tried to kill the copy command, but it wouldn't die. I killed the parent processes, and it just kept moving up the process tree until init was its parent. I tried rebooting.. I got the message "system is going down for reboot now", then the first few messages of the reboot process, and then it just stopped at "unmounting local filesystems". Again, I left it for a while, nothing. I ended up hard booting it.
After rebooting, I recreated the partition, then tried formatting it. This time it started writing inode tables, then just stopped at a certain point. I think at 133/4001. Again, I left it for a while and it didn't move.
Again, I tried killing the process and it moved up the tree until init was its parent. Rebooting hung at the same place, and again had to hard boot it.
This time I deleted the partition and tried creating a small partition - 500M. mkfs formatted it as expected, and I was able to mount and write to the partition.
I deleted the small partition, and tried creating a larger one - 100G this time. fdisk created the partition just fine (and did not complain or report any errors through this whole process), but again mkfs gets stuck.. this time at 34/801 inode tables. I haven't been timing it, but I want to say it's been at least 10 - 15 minutes.
dmesg reports some drive errors, but I'm not sure what they mean code...
View 2 Replies
View Related
Dec 13, 2009
Let me start off with the usual: I'm a linux newbie but am doing pretty good so far with google by my side. I've come across a problem I cant seem to find an answer to:
I just got a CyberPower 685 AVR UPS. I Installed their power panel software and it works great in CentOS 5.4. When I reboot, the system hangs right after the "Red Hat Nash 5.6..... Starting" message. I've left it for 20 mins so far and it's still hanging. If I unplug the USB data/shutdown cable, within about 10 seconds it starts detecting hard drives and continues booting...
Ive even returned the UPS for another to see if it was bad, and it still is giving me problems.
View 5 Replies
View Related
Feb 23, 2010
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
View 4 Replies
View Related
Sep 26, 2010
I am running du -h --max-depth=1 and it is hanging, presumably processing a large folder.
Could you give me a list of the large folders in the Redhat OS?
Is there any way to check if du has failed or is hanging/processing a folder?
How long should du -h --max-depth=1 take on 40GB of data?
Solved, it was taking a long time on a 29gb /var/log folder
View 3 Replies
View Related
